MacBook Pro :: Wake Up By Opening Lid - Display Goes Black After Few Moments
Jun 29, 2012
I have an early 2011 MacBook Pro (2.0 GHz i7, 4 Gig Memory, Lion.7 with all upgrades) that has just started behaving strangely. When I put it to sleep by closing the lid and wake it up by opening the lid, the display is normal for a moment or two, then goes black. The keyboard is lit, and clicking on the trackpad gives me an alert sound, but it seems impossible to get the screen to light up. The only way I can get the screen back is to restart the computer. Putting it to sleep by clicking on sleep in the Apple menu works fine (it wakes up normally), but closing the lid doesn't.
my macbook air 13 display only black screen and pointer when wake up from sleep. its not frequently happen. to become normal it take 10-15 sec, is it hardware problem or software problem?
I've noticed that when my rMBP (late 2013, Mavericks) turns off the display automatically while on battery (as configured via Energy Saver) and I try to wake it immediately, I get a black screen with the cursor, rather than my password/unlock screen. It remains a black screen, with the cursor moveable, for 5-10 seconds or so, and then the password/unlock screen will appear as usual.Â
This does not happen if:I don't try to wake the display/computer immediately after automatic display sleep (e.g., I wait 5-10 seconds and it's fine)I turn off the display using a hot corner and immediately wake the displayI put the computer to sleep by closing the lid and immediately wake it by opening the lidI select Sleep from the System/Apple menu and immediately wake it by pressing a key or clicking on the trackpadÂ
Why automatic display sleep is causing this temporary black screen? I currently get around it by setting the time for automatic display sleep while on battery to 10 minutes instead of the default 3 minutes to minimize the chances of needing to immediately wake the screen. I'd like to keep it at 3 minutes if possible to maximize energy savings, but the temporary black screen is really annoying if I didn't really want display sleep and consequently have to wake immediately.
For the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
I have very recently upgraded to Lion on my late 2009 Intel Core 2 Duo iMac. When the machine goes to sleep on wake up - instead of going to the log on screen, the display remains black but when I move the mouse the display creates a grey pixel trace wherever the pointer should be. I also end up with the desktop clock in the top right.
To log on, I have to literally "colour in" the area where my profile icon should be which enables me to input my password. Also, on wake up, any applications that I had open like Safari, Word, iTunes etc are all closed and not open in the dock. On a separate matter, when this happens I cant wake my imac up to access my itunes library for home sharing on my ATV3 and 4S.
This is an odd, intermittent problem that started about a month or two after purchasing my fall 2011 MBP 15 (i7 2.5, 16GB RAM). This problem started, went away on its own, and now it's back after about two months of being trouble free.When I close my computer, it doesn't go to sleep.The slit light on the right front of the computer does not go into its slow flash mode; however, it does light up solid, and theng it stays lit.When I open the lid, the computer wakes up immediately (it was never "sleeping" to begin with), but then after a second or two the screen fades to black.The screen can be brought back to life by pressing either of the brightness buttons on the keyboard.I took it to the Genius Bar, and of course I couldn't replicate the problem for them.When I got back home, I decided to test the computer plugged in, and that's when the problem came back.I don't know why it went away previously.So, in summary: The issue only occurs when the computer is plugged in.The sleep problem existed before I installed 3rd party RAM and Parallels 7, and they exist now after I have installed the RAM and new software.I use a wireless mouse, and the little dongle has no effect on the sleep issue - the computer will not sleep (when plugged in) either with or without the dongle in a USB port.The battery charges just fine.All of my software is up-to-date, and I'm running OS X 10.7.3I have checked for the Flashfake malware, and I do not have it.I am running Sophos Anti-virus; I have done a scan, and have found no threats.They flashed my PRAM and ran some tests at the Apple Store and everything passed.
When I close then open the lid on my MacBook, it will not wake up from sleep mode. I have to reboot by holding down the power button for 10 sec. When it restarts, it takes a long time to get past the gray screen with the apple logo. I also have this same problem when it goes into sleep mode, when left idle. I have since changed the settings so it will not go into sleep mode when idle in system preferences. I have reset PRAM and SMC, but the problem still persists.
Info: Macbook (13-inch early 2008), Mac OS X (10.5.8)
I slept my MacBook Pro last night and can't wake it? I have rebooted and no bing sound is made. The screen remains black. The volumn keys blip. It is as if it is still locked in sleep mode!
In the past week my volume suddenly gets 50% to 70% louder and after a few moments it returns to the original sound. This happens two or three time in an hour.
Occasionally my Alu Macbook won't wake up from sleep. The keyboard backlight comes on, but the display won't wake. Sometimes the machine is quite hot and the fans are blasting too. Only a power cycle will fix it and then there's a message about OS X restarting unexpectedly.
Just got a new Mac pro and installed an SSD as the boot drive. I was downloading some apple software updates and left the machine alone to download for an hour.Came back and it was asleep or hibernating (is there a difference?)At that point I clicked the mouse and I could hear it start back up but NOTHING came on the screen, just black.I could press a key on the keyboard and hear the error type noise so the desktop was active, just not being displayed.
I disconnected my mini display port (I have a 24' Apple cinema LED display) and plugged it into the second mini display port on the back and it came back on.Anyone know what this could be?A result of an SSD boot drive or do I need my LED display plugging into a particular mini display port out of the 2 on the graphics card?
I have a MacPro 1,1 (2006) 2.66GHz that it is always working as a home server. Â
After some time working idle the screen goes black. When I want to wake up there is no response. The screen turns into safe energy mode blinking his LED light power indication. I have to force shutting down pushing phisically the power button for some seconds. Â
Graphic Card problem? I have another one but I don't test it for now. Â Â
I have made a PRAM reset and SMC reset shutting down the MacPro, unplug the power and push the power button for 10 seconds. No results at all.Â
Even putting Energy System Preference on NEVER (computer sleep and screen) after some time (2-3hours) the MacPro goes to black screen.Â
Info: Mac Pro, Mac OS X (10.7.4), 8GB RAM; ATIRadeonX1900
I have a 17" MacBook Pro Early 2011. I have noticed some strange behavior when I am charging the laptop.Â
For whatever reason, when I close the lid and put the machine to sleep, no matter how long the machine has been asleep when I open the lid again the machine wakes up just fine and the login screen shows, and then the display goes right back to sleep. This is not the entire machine - just the display. To wake the display, I have to unplug the Magsafe adapter. The screen comes back immediately after doing this. Plugging the machine back in does not cause the laptop to go back to sleep.All updates have been performed (Software Update gives me no available updates), and other than this issue there are no other problems with the machine. To my immediate knowledge, I don't know when this started, though I do know that it has been intermittent for some time. I was hoping that the firmware updates that came a few weeks ago would fix the issue, but it seems to recently have gotten worse. I cannot pinpoint anything that would be causing this... and environmentally nothing has changed. The laptop is in near perfect condition from when I bought it, I keep it in a sleeve and a padded backpack when I'm not using it.. and unless I have something open that I am still working on I actually shut my laptop down whenever I'm not using it (living in Texas this is a habit I developed due to old laptops being damaged due to the heat build up in a trunk. I don't actually leave my MBP in the car though especially if it is hot out...)Â
I have noticed on my Macbook Pro purchased in September 2013 that the display will take a long time (~30sec) to awake from sleep. I can see the mouse pointer on the dark screen but the monitor will not wake. If I close the laptop, and open it, the screen will come back to life.Â
When I wake from a long sleep, my screen comes on but everything is black. If I move my mouse around, the tiles behind the pointer switch over to whatever app is open. When I invoke expose/spaces, the screen fixes itself and displays everything.
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
When I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
I recently purchased a Mac Mini at the Apple store. I'm using an Apple bluetooth keyboard and trackpad. Problem is, when the mini goes to sleep, it won't wake back up. Nothing I can do apart from a hard restart by pressing the start button will wake the computer up. I don't know what to do to fix this. Is it something in settings?
This just started yesterday (May 31st). I keep everything updated as it comes out and nothing new has been installed in the last couple of days.
When I need I wake up my iMac (now requiring a keystroke or mouse press instead of just moving the mouse), the screen comes up black, but the cursor is there and moves around fine.Â
It stays black for a while (15 seconds or longer, but it feels like forever) and then it finally comes up completely.Â
Info: iMac (27-inch Mid 2011), OS X Mavericks (10.9.3)
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
In the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.Â
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in). This did not occur until I got 10.7.3 and only within the last 2 months.
Info: MacMini 2011 i5, 8GB, Radeon 6630M , Mac OS X (10.7), iPhone4; headless dual G5 via FW800
I'm using an iMac (late 2011) with 10.7.3. I'm doing things on the computer or some process is going on when the screen instantly goes black (no dimming first). If a video was playing, I can still hear it playing, but pushing keys on the keyboard or mouse or pad does nothing to wake the screen. Sometimes pushing the power button a number of times will get the screen to come on, sometimes it won't. When the screen goes black, if an external drive was running and then stops, I can sometimes get the screen to come to live. Sometimes this black screen happens when I'm burning a DVD; when the DVD is finished, I can bring the screen to life. I thought one of my two external drives was bad, so I disconnected it. That seemed to help (though verifying the disk revealed no problems). But a few minutes ago, the screen instantly went black again; no dimming first. There have been times I thought this was associated with a new bit of software, but then it returns even after I delete the suspect software. Sometimes I have to use the power button to shut down the iMac then restart it. Once, I had to unplug and replug the iMac before I could get the computer to respond and the screen to return to life. I don't know if this is a hardware problem (internal or external), a software problem, or some combination...or something I haven't thought of, at all.
This started a week ago, When my early 2011 MacBook Pro8,2 (running Lion) is plugged in and I close the lid, the light on the side stays a solid bright white. When I open, my display turns on for about a second or two, but then turns off, causing me to have to unplug my laptop inorder to get the display back on.
I have a 2007 santa rose mbp and recently I have been having display issues. Out of nowhere is seems that my display just goes black. You can tell that the screen is still on because of the backlighting; its just the picture that seems to disappear. However, the computer still seems to be working fine. I can remote screen share and use the computer normally as if nothing happened. I have no idea if this is some kind of a hardware or software problem... Can this be an indication of the 8600M GT dying?
I have an Early 2008 Mac Pro with an ATI Radeon HD 2600 XT graphics card. Yesterday I could not get the display to wake from sleep in the morning, and even after a reboot I had nothing to look at. Then I (eventually) moved the card to another PCI Express slot and everything worked! Then after a reboot no video again. I moved the card back to slot one and it worked! Rebooted again, no display. Move card again, everything is fine.
I have an imac early 2009. I have recently updated various software from Apple. I have the engery prefrence at : 1hour Computer sleep and 15 mins Display sleep. I use Gotomypc to login to my home computer. Prior to the new updates i did not have an issue with with the computer not waking from sleep. But since the updates my display will not wake? They hardrive wake but the screen just does not. I do have a screen saver, however, this was not an issue prior to the new updates.
well was using my macbook and he display suddenly went black on me. I charged and restarted with no luck I usually get a quick flash and then it continues to start up. now if I look closely the system is working properly becasue i can see my log in screen very faintly in the back ground. Does anyone know what my issue may be?
Since the new line of MBP I have fallen more and more in love with the black frame around the display on these MBP. Feels like the display is much easier for the eyes.
Do anyone know if it is possible to buy a skin/coverfoil/etc to cover on the alu frame around my MBA display?I have found a lot of pages/webshops that provide skin for the front/back and trackpad, but nothing for the frame around the display.
after starting with power button, I hear apple thud and apple sign comes on, and can hear machine is on, but no display. What has occurred and how do I get display to work as normal?
