I recently purchased a Mac Mini at the Apple store. I'm using an Apple bluetooth keyboard and trackpad. Problem is, when the mini goes to sleep, it won't wake back up. Nothing I can do apart from a hard restart by pressing the start button will wake the computer up. I don't know what to do to fix this. Is it something in settings?
Info:
Mac mini, Mac OS X (10.7.4)
I have an early 2008, 24-inch iMac. This problem started after I installed an OS X Mavericks update (and has continued). Basically, after the screen is asleep for a while, if you come back and move the mouse / tap the keyboard, the desktop never reappears. The screen stays black but the mouse cursor shows up and you can drag it around. I've seen some similar issues that said they could get the app switcher, but that never happens for me. Just mouse cursor and black screen, no matter how long you try to wait it out or tap buttons. The only solution is a cold restart, although I think in the past I was able to fix by turning off energy saver settings for putting the display to sleep. It doesn't happen every time, I'd say it happens over 50% of the time. The problem actually kicked in with one particular App Store update of Mavericks. I believe it was 10.9.3 if I recall correctly.
View 1 Replies View RelatedWhen I wake from a long sleep, my screen comes on but everything is black. If I move my mouse around, the tiles behind the pointer switch over to whatever app is open. When I invoke expose/spaces, the screen fixes itself and displays everything.
View 1 Replies View RelatedFor the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
View 3 Replies View RelatedIn the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.Â
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in). This did not occur until I got 10.7.3 and only within the last 2 months.
Info:
MacMini 2011 i5, 8GB, Radeon 6630M , Mac OS X (10.7), iPhone4; headless dual G5 via FW800
I have very recently upgraded to Lion on my late 2009 Intel Core 2 Duo iMac. When the machine goes to sleep on wake up - instead of going to the log on screen, the display remains black but when I move the mouse the display creates a grey pixel trace wherever the pointer should be. I also end up with the desktop clock in the top right.
To log on, I have to literally "colour in" the area where my profile icon should be which enables me to input my password. Also, on wake up, any applications that I had open like Safari, Word, iTunes etc are all closed and not open in the dock. On a separate matter, when this happens I cant wake my imac up to access my itunes library for home sharing on my ATV3 and 4S.
I'm using an iMac (late 2011) with 10.7.3. I'm doing things on the computer or some process is going on when the screen instantly goes black (no dimming first). If a video was playing, I can still hear it playing, but pushing keys on the keyboard or mouse or pad does nothing to wake the screen. Sometimes pushing the power button a number of times will get the screen to come on, sometimes it won't. When the screen goes black, if an external drive was running and then stops, I can sometimes get the screen to come to live. Sometimes this black screen happens when I'm burning a DVD; when the DVD is finished, I can bring the screen to life. I thought one of my two external drives was bad, so I disconnected it. That seemed to help (though verifying the disk revealed no problems). But a few minutes ago, the screen instantly went black again; no dimming first. There have been times I thought this was associated with a new bit of software, but then it returns even after I delete the suspect software. Sometimes I have to use the power button to shut down the iMac then restart it. Once, I had to unplug and replug the iMac before I could get the computer to respond and the screen to return to life. I don't know if this is a hardware problem (internal or external), a software problem, or some combination...or something I haven't thought of, at all.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
my macbook air 13 display only black screen and pointer when wake up from sleep. its not frequently happen. to become normal it take 10-15 sec, is it hardware problem or software problem?
Info:
MacBook Air, OS X Mavericks (10.9.4)
When I need to go somewhere or just eat lunch, I put my iMac to sleep. After that, when I come back to wake it back up, it stays black.
View 3 Replies View RelatedI've noticed that when my rMBP (late 2013, Mavericks) turns off the display automatically while on battery (as configured via Energy Saver) and I try to wake it immediately, I get a black screen with the cursor, rather than my password/unlock screen. It remains a black screen, with the cursor moveable, for 5-10 seconds or so, and then the password/unlock screen will appear as usual.Â
This does not happen if:I don't try to wake the display/computer immediately after automatic display sleep (e.g., I wait 5-10 seconds and it's fine)I turn off the display using a hot corner and immediately wake the displayI put the computer to sleep by closing the lid and immediately wake it by opening the lidI select Sleep from the System/Apple menu and immediately wake it by pressing a key or clicking on the trackpadÂ
Why automatic display sleep is causing this temporary black screen? I currently get around it by setting the time for automatic display sleep while on battery to 10 minutes instead of the default 3 minutes to minimize the chances of needing to immediately wake the screen. I'd like to keep it at 3 minutes if possible to maximize energy savings, but the temporary black screen is really annoying if I didn't really want display sleep and consequently have to wake immediately.
Mac mini 2011 doesn't want to wake up by clicking on the magic mouse. Sometimes I need to click for over 30 secs before it wakes up.
In Mavericks, the wake up process was instantaneous.
Info:
Mac mini, OS X Yosemite (10.10.1)
About a week ago I received my new battery due to the recall. The last few days my power book has been great when I open my power book today it will not wake up. So i figured I would plug it in. The light stays green, does not change to orange, and still continues not to wake up. Even taking the battery out and trying to turn it doesn't work. Power cord stays green then as well.
View 4 Replies View RelatedOnly way to recover is hard restart. Just downloaded Lion two weeks ago - problem started shortly after.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
My iMac wake unexpectedly from sleep mode then goes back to sleep 00:10-00:15 later. Yosemite is current.
Info:
iMac, Mac OS X (10.6.8)
Loaded pics up for the 1st time from my 7d into Aperture 1.5 and left my computer on, woke up and it wouldn't come out of sleep. I did a hard shutdown holding down the power button and the screen just stays black and I never hear the chime, light on power button is solid white. Since I'm on vacation with my wife and infant daughter I don't have time to mess around troubleshooting but see it may be a failed logic board? Do they just fail randomly or what? My aunt that I'm staying with turned off a surge protector a light was plugged into, I was using her power charger for her MacBook Pro and only this morning found out it was plugged directly into the outlet below the surge protector was on that she flipped off.
Could that have created a surge on the other plug or something? She does this all the time with her MacBook Pro plugged in and its never created a problem, I'm writing this post from her computer right now! (Only brought the Mac out because my iPad wouldn't load the photos for some reason, don't know if it has something to do with the HD video or because I also had photos from my Canon 50d on there or if that has something to do with my Mac's problem?) I've attempted an SMC restart and it does the same thing? I'm now extremely stressed thinking I may have lost all my pics that I haven't backed up in months of my infant daughter. When I start it up I hear an initial sound of a hardrive spin or fan but then its basically silent.
Mac book pro starts up but screen stays black. I have tried taking the battery out, waiting over night it still is black
Info:
MacBook Pro, iOS 5.0.1
This 5 year old iMac makes the seek optical drive sound when switched on, but does not chime, but I can hear the hard drive going afterwards.
The screen just stays black, not a flicker.
The problem is that it is located in a small pretty isolated town in NE Brazil, I will be going back out there later in the summer so if anyone has any helpful ideas it would be most welcome. Fortunately we have a full CCC clone of the hard drive and a working MBP so we haven't lost anything, but it would be very good to have it working again.
Does it have a socket for an external monitor, I really cannot remember, as I have not seen it since November, I know the old round iMacs had one.
The nearest Mac store is probably in Rio or Sao Paulo which are a good day travelling by car and plane so there is no chance of getting it there.
Info:
iMac, Mac OS X (10.4.11)
imac turns on but screen stays black ? i can hear it operating ...
Info:
imac 20" and macbook 13", Mac OS X (10.5.1)
I can hear the chime going off, but the display turns on you cannot see through naked eye, you have flash light onto to the screen to see very little, can you tell me why this is happening and how to fix this issue. Secondly, can you tell me how to fix this issue, my keyboard and trackpad doesn't work. Is it the problem of flex cable of both the keyboard and trackpad or is the related to software
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My 2007 MacBook is starting up and making all the right noises but the screen stays black - looking on different forums it seems likely it is either the back light or the inverter that need fixing but in the meantime there is some things on there I need - I have an IMac as well and I have tried to connect the too so that I can view the macbook on the imac - I used a firewire cable and held down the t key on the macbook (but obviously couldn't see if it had worked) I then turned on the Imac and held the option key down but it only give me the IMac HD to start from and not the Macbook
View 2 Replies View RelatedWhenever I close the lid to my MacBook it'll go to sleep by turning off the harddisk and the light is blinking. But when I go to pick it up or even move it the Superdrive makes a noise as if its searching for a disk and the apple on the lid/monitor blinks on and off. Basically the computer never really stays in sleep mode.
View 24 Replies View RelatedI have a 24inch iMac 3.06ghz and seems to be stuck restarting. It will not get to the any screen (just stays black) and constantly restarts, the chime seems to get quieter each time, after about 6 times it comes back to full volume but will not get any further in the start up process.
I restarted it myself because the screen was flickering very quickly and seemed to freeze (this is the first time I have encountered that). I had to power down by the button at the back, then restart using the power button and now won't start up. All software fully up to date. Running Lion.
Info:
iMac, Mac OS X (10.7)
The latest iMac model. When I click on the power button: I can hear the Hard disk and the DVD drive spin up. The screen stays black. The startup sounds plays half way through the first time, like its being cut off. After the first startup chime has been cut, the chime keeps playing in a loop. The computer doesn't come any further than that.
I have tried: Unplugging all peripherals, with the same result.
SMC reset: Unplug power cord and hold power button for 5 sec. PRAM reset...
It seems like the computer does not even get to boot and ignores all keyboard input. I also tried booting from the DVD drive with the installation disk. But I can't get any further than the repeating startup chimes.
I have a 2006 Macbook that when powered up, the screen stays black, the machine beeps 3 times, and sleep light blinks 3 times before the process repeats over and over. When doing a search, I saw something about the RAM but
Info:
MacBook
additional information: 27" Intel based 64 bit 8GB ram dual boot with windows 7 I tried resetting my pram
Info:
iMac (27-inch Mid 2011), iOS 4.3.1
My Mac mini starts with a white screen but stays on the apple logo and the small circle as if it is booting. I turn it off manually and switches it back again after a while. This time no apple logo appears, but got 2 symbols popping up and blinking as shown in the pictures attached.
Info:
Mac mini, Mac OS X (10.6.8)
Just got a new Mac pro and installed an SSD as the boot drive. I was downloading some apple software updates and left the machine alone to download for an hour.Came back and it was asleep or hibernating (is there a difference?)At that point I clicked the mouse and I could hear it start back up but NOTHING came on the screen, just black.I could press a key on the keyboard and hear the error type noise so the desktop was active, just not being displayed.
I disconnected my mini display port (I have a 24' Apple cinema LED display) and plugged it into the second mini display port on the back and it came back on.Anyone know what this could be?A result of an SSD boot drive or do I need my LED display plugging into a particular mini display port out of the 2 on the graphics card?
I have a MacPro 1,1 (2006) 2.66GHz that it is always working as a home server. Â
After some time working idle the screen goes black. When I want to wake up there is no response. The screen turns into safe energy mode blinking his LED light power indication. I have to force shutting down pushing phisically the power button for some seconds. Â
Graphic Card problem? I have another one but I don't test it for now. Â Â
I have made a PRAM reset and SMC reset shutting down the MacPro, unplug the power and push the power button for 10 seconds. No results at all.Â
Even putting Energy System Preference on NEVER (computer sleep and screen) after some time (2-3hours) the MacPro goes to black screen.Â
Info:
Mac Pro, Mac OS X (10.7.4), 8GB RAM; ATIRadeonX1900
I have an intel based mac pro running tiger. When it falls asleep if it's asleep for an extended period of time...say 45 minutes or longer, it won't wake up. I have to manually power it down. If it's asleep for less than 45 minutes it wakes up fine.
View 7 Replies View RelatedI have a MacPro Dual 3GHz, running OS 10.5.8 and when my Mac goes to sleep, it won't wake up. Fans speed up and light blinks, but I have to do a hard reboot.
Info:
Mac Pro, Mac OS X (10.5.8)
