MacBook Pro :: Possible To Use DDR3 Memory At 1333MHz?
Feb 28, 2012
I want to upgrade the memory for my 2.53GHz 13" MB Pro from 4GB to 8GB. If the system bus is 1067Mhz. Does that mean I need to be sure to get mem sticks that are also 1067Mhz?
I would like to update my MacBook Pro 5,1 with two 2GB modules to 4GB. The current RAM is running on 1066MHZ but the new modules at my computer place are only available with SO-DIMM 2GB DDR3 1333MHz.
Would the MacBook Pro 5,1 work with two SO-DIMM 2GB DDR3 1333MHz RAM modules too?
I am interested to get myself a 17" 2.4GHz quad-core Intel i7 MacBook Pro, just that I want to make sure that can MBP17" 2.4GHz support 16GB (8GB x2). 1333Mhz DDR3 SDRAM memory configuration. Or is it just waste money to install 16GB RAM in the MacBook Pro, cause in the menu it says MBP support up to 8GB of RAM.
Info: 27" iMac i7 (Mid 2010), 5G iPod 60G, Mac OS X (10.6.4), Final Cut Studio 3, iLife '09
I have recently bought 2 4GB 1333MHz memory to be used with my Mac Pro mid 2010 nehalem processor. It works fine, turns on and all, but after opening a few programs and letting it run a little and i ask him to shut down, it takes me to the grey screen with the little rolling ball and does not shut down.
I upgraded my late '09 13" MBP to 4gb, but one of the sticks apparently died. I'm about to replace it with my old 1gb stick so then I'll have 3gb total ram.
What do you guys think?I am also curious as to the clock speed of the new upcoming processors. Online it says the fastest one they have is 3.2 GHZ, so will the speed increase come from DDR3 memory and no frontside bus?Does anyone know the actual technical differences between the current processors and the upcoming, other than the memory and frontside bus?
What is the max "addressable and usable" DDR3 1333 memory that can be installed in a Mac Mini i7 running Lion Server?The Apple Store will install up to 8GB but I have seen 3rd party 2x8GB SO-DIMM 1333MHz "Apple memory" available that will allow 16GB. Does anyone know what is the real usable limit is? I can't find specifics in the docs and I don't want to install 16 if the bus can truly only address 8.
I used to buy Mac DDR3 ram from New Egg, I used to buy Crucial but they no longer sell it, so I want to stick with Crucial since it works the best, but wondering where everyone else is getting their ram and what brand.?
I am considering upgrading my RAM from 2GB to 4GB today at the Apple Store, and was wondering if I will notice a significant performance boost. 2GB is fine, but occasionally I'll get that annoying beach ball. It's $150 for a 4GB boost, and I have the 2.0GHZ aluminum MacBook. Would it be worth it for me to upgrade it?
I just got a rev B 1.6 120gb 2gb DDR3 Ram macbook air i paid around 920.00 for it and iam just wondering how everyone likes theirs. There is 9 months of warrenty left on it and is it worth me buying a new applecare?
I'm looking to replace my old '06 imac with a new 13" mbp. I'm getting the low end model (can't justify the extra $300aud for the next model), and want a ram upgrade. Can I use just a normal kingston ddr3 sodimm? i can save a boatload of money if i don't need specific mac memory.
Does anyone know if this will work. I find they cost the same for 4 gb. I was thinking then I would have flexibility to put into another machine in the future. I know in the PC world this is possible. Not sure about macs.
I purchased a brand new Macbook Pro from Best Buy a few months back, it is the 13" unibody with a 2.26 ghz dual core processor and came with 2gb of memory installed. I just bought the two sticks of memory from [URL] which were Kingston DDR3 1066 204-pins, 4gb each. My friend told me that my Macbook Pro will only support up to 6gb, but my manual says that it supports up to 8gb. He also said that people have been having trouble with their motherboards by installing too much (8gb) of memory. I've done some research and looks like I'm good to go, but just want some reassurance before I install the new memory. One last thing, he also told me that 8gb is only supported on the i7 processors?
I ha e 2x2gb of 1066 ddr3 ram sitting here. I am going to buy an iMac. I can't decide between the refurb 27 core2duo, the refurb 27 core i5 or the new 21.5" i3. Of course I am torn between cost and performance. I would prefer the bigger display but it's not necessary. If I could use my existing ram in the new 21.5 that may put it as the winner but I am unsure if I can mix 1066 and 1333 ram or not. If not then I will probably get the refurb 27 and then it's just to decide between i5 or core2duo
Corsair "CT" series (certified) vs. "CM" series (regular)
Kingston "KTA" series (certified) vs. "KVR" series (regular)
I can't find any vendor that carries the certified Mac compatible series where I'm from (and shipping from the US will wipe out any savings vs online apple store). Has anyone tried using the Kingston KVR1066D3S7 with their uMBP?
I see MacMALL is selling MBA with the former in both categories and i didnt know how much it will affect my performance. Should i spend the money for the upgraded specs?
I just bought my new mac mini, and I'm planing to upgrade it with ssd, bigger second hdd and 16GB of ram. Can anyone tell me what is the difference between SODDR3 and SO-DIMM DDR3...is there any difference? which one should I get?
I have a Black MacBook (Early 2008). I think that I still have the factory standard RAM sticks (I bought the Mac used from a friend). I noticed today that I am running on only one gig of RAM even though I have two gigs of memory.
I have a iMac DV G3/500 (Special Edition) from summer 2000. Anyway, I am using Mac OS 10.2.8. Recently, my start up disk's memory has gone done from 1.2 GB available free space to 668MB (currently). I haven't saved anything on this disk so I can not understand why this memory has dissappeared. I have also had icons on the start up menu disappear. Could someone please tell me how I can restore the missing memory?
I just bought a early 2009 MAC Pro and it came with 3GB of RAM, I ordered 3 2GB sticks of memory to replace the 3 1GB sticks that I had in there from Kingston. I turned off the unit, I popped the little levers and pulled the memory out of slot 1, 2, 3 and then replaced the memory with the new Kingston in slot 1, 2, 3
One of the sticks in is not working at all and I get the RED LED light no matter what slot I move that chip to. So I am running on 2 of the new Kingston memory chips.
Can I mix the memory and add the 1GB into slot 3 and 4 with slot 1 and 2 full of 2GB chips?
Also how to I run the memory utility again? I went to /system/Library/CoreServices/ and then I see the program Memory Slot Utility.app
How do I run this? I'm used to no spaces and I type ./then program name
I'm not sure the details on mixing RAM types these days, particularly with ECC/non-ECC. I have the stock 27" i5 iMac (so presumably 2x2GB chips). I have 2 1333mhz ECC 1GB chips ([URL]) available to me. Would it work to pop those in to the 2 empty slots in the computer or would mixing the types cause problems?
I've just updated the os to 10.6.2 and my 16gb mac pro 1,1 only shows 8gb in the system profiler. The memory tab shows they're all working correctly but size says "2gb" where should be "4gb".
I installed 4x2GB memory modules. Now, I have a "Memory Slot Utility" pop-up(The memory modules are installed in the recommended slots) that pops up every time I start my computer. How do I get rid of this notice permanently?
I'm new to mac and I've noticed that I can have 2 gigs of memory one day and the next I'm down to 24 or something!I've noticed that if I open a file in Itunes and then change the info that there are now 2 files in the finder, one with the old info and the new with the new metadata. Why does OS-X do that?!
Also, if I have 1 gig of memory left (out of 180 or so) why does it disappear to 0 if I open photoshop? I'm used to a PC running virtual memory and CPU but why does the Mac actually take away my available memory?I'm at my wits end here, it's been driving me up the wall for weeks!
I am considering upgrading from my ~2 year old MBP to a 2.13 MBA Rev. C and have a question re: RAM performance: how does your MBA w/SSD perform once you have maxed out the 2GB of internal RAM and started swapping to the SSD?
The reason why I ask is that my current MBP had 2GB of RAM which would max out under my regular daily use (typically open is Mail, Entourage, Skype, Adium, iTunes, Keynote, Activity Monitor, and Safari with 10+ tabs open... don't ask). As you might expect, everything grinded to a halt once the MBP blew through the physical RAM and it started swapping to the HDD. A few months ago I upgraded to 4GB of RAM and everything ran smoother.