My hard drive crashed after about a year and a half. So I bought a new one and installed it myself. When I turn on my mac now and hold C with the install disk in the drive it just spins for a while below the apple and then goes to the gray please restart your computer screen.
View 4 RepliesSo, I have a 13" white MacBook that is about three years old. Recently, the Combo Drive stopped reading CD-Rs (possibly all discs in general, but I only ever use it to burn CDs, so I wouldn't have ever known), so I decided to try to install a new Super Drive myself.
Following a guide on [URL], I installed the new drive, but when I turned my computer back on, it was not recognizing the drive at all. System Profiler was saying "This system does not contain any ATA devices. If you have any ATA devices installed, check that they are connected and powered on." I was then able to reinstall my old Combo Drive, which my computer recognized immediately. Thinking that I may have just not connected something tightly the first time, I tried a second time. Same thing happened.
So, my question is, is there anything I may be missing or does this definitely mean the drive is defective? I just want to make sure I'm not sending back a functional drive before I go ahead and do so.
Tried to add a new internal drive to my Mac Pro.Â
Processor 3.2 GHz Quad-Core Intel Xeon
Memory 8 GB 1066 MHz DDR3 ECC
Software OS X 10.9.5 (13F34)Â
I wanted to add a new 2TB internal drive and it won't read. Disk Utility shows the new drive but I don't have highlighted options to verify disk, repair disk, verify disk permissions or repair disk permissions. Here's the info:Â Name :Â Â Â Â WDC WD2001FASS-00W2B0 Media
Type :Â Â Â Â DiskÂ
   Partition Map Scheme :    Unformatted
   Disk Identifier :    disk4
   Media Name :    WDC WD2001FASS-00W2B0 Media
   Media Type :    Generic
[Code] ......
Info:
Mac Pro, OS X Mavericks (10.9.5), Graphics ATI Radeon HD 5770 1024 MB
Why does the internal hard drive in my MacBook Pro spin up at seemingly random times? The activity monitor shows high data rates to and from the drive.
Info:MacBookPro, Mac OS X (10.6.8)
A while back I was running low on hard disk space so decided to upgrade my hard drive. Went ahead and upgraded to 320Gb. Then after some time, I noticed that the hard drive was making a large spinning noise so I thought it was a bad drive and RMA'd it. I just recently got the new drive and installed it and the drive was making that same loud spinning noise. Now I'm frustrated with this and want to get to the end of it. I'm thinking it might be the rubbers are out of place that holds the drive.
View 5 Replies View RelatedMy friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies View RelatedSo my girlfriend boss wanted me to fix her computer. So I brought it home turned it on, and it didnt chime but it booted to the gray screen with apple logo/ slashed circle/and folder with a "?" So I made a USB Mac OS x bootable drive (FLASH) held down alt (try using a windows keyboard its fun) was able to select option and install a fresh copy. all seemed well was running really hot so I poped of the screen. HOLY MOLY! this thing is CAKED with dust, and I am not kidding it has literally piles of dust. So I ran updates, and did firmware updates. Turned it off for the night. Â
The next morning I went to radio shack and got Dust remove spray, opened it up made sure I was carful taking off the screen, and blew the sucker out. now its NICE and CLEAN. then i made sure I plugged everything in and turned it on. Drive spun like normal, Optical checked for a CD, and fans are also running normally. but no chime, no nothing stays as silent as normal but doesnt budge, it is like it hangs. Â
Info:
iMac, Mac OS X (10.7)
So I have an external hard drive hooked up to my MBP via USB. I've noticed that every now and then (maybe every half hour or hour?) the drive spins up. It's actually really annoying, as the drive makes a loud sound as it spins up.
I can't figure out why it does this; the drive spins up and then goes back idle. Time machine is DISABLED, spotlight index on the drive is DISABLED as well. I use the drive solely for storing movies/music. There are NO applications installed on it. The only apps I have open are finder/preview/safari/firefox/adium/itunes. My guess is that some process is trying to access the drive for whatever reason now and then.
I have a LaCie 320 GB external hdd (USB 2.0) that worked perfectly until last night. Now it won't mount when I connect it to my computer, nor can I see it in Disk Utility. Disk Warrior can't see it either. I tried connecting it to my roommate's MBP with no luck.
It spins up just fine and doesn't make any clicking noises or anything like that, so I feel like there might just be some hope yet; I'm thinking it might just be a faulty USB cable or something, but I don't have a spare one to try it with.
I've noticed recently that when my imac is sleeping it's HDD spins up, crunches a bit like it does and then power down again. The screen and everything else is off, just the HDD comes on. Does anyone know what this could be? It's happened a couple of times in the last week. It's the Seagate drive BTW.
View 5 Replies View RelatedI am about to install a new (blank) hard drive to my existing 2009 Mac Pro. The Drive will then be used solely for windows (won't be a partition, but a stand alone drive, separate from my other drives which are Raid).
On the apple web site, it says that the OSX software installed will provide drivers etc. Does that mean that I should:
1) connect the drive
2) format the drive under OSX
3) run the bootcamp assist...
I have the 13" MacBook Unibody with the 250 GB HDD. I wanted to replace that with my Seagate Freeagent Go 500 GB external HDD. I took off the enclosure and replaced the 250 gb with the 500 gb but the computer won't recognize the new 500gb HDD. All I get is a blinking question mark during start up which I know stands for HDD issues. The 500 gb HDD is working fine btw, I tested it after I took it out of the enclosure.It is a Serial ATA 2,5" and works just fine. Is the Macbook 13" Unibody not supporting 500 gb HDDs maybe? I checked the specs for the MacBook Pro 13" which is supposed to be the same as the one I have and it does say that it supports 500gb HDD.
View 2 Replies View RelatedI have a 2008 Mac Pro with the original OSX drive and then two other hard drives, one I use for Boot Camp/Fusion and the other for my work files. Under Energy Save in system preferences, I have it so that the drives will sleep whenever possible. The issue I'm having is one of the drives, I think the one with my work files, will wake from sleep every 15 minutes or so even if I'm not accessing any of the files. I haven't timed it exactly but it's around 15-20 minutes and happens throughout the day. What is causing the drive to wake? I disabled iStat Pro because before the drives would spin every time I checked my dashboard so that's not the problem anymore.
View 16 Replies View RelatedI put it on Craig's list so wanted to wipe the drive and figure I'd play around with OS 9 a little just for fun. While in OS 9 it prompted me to upgrade the firmware on the DVD-ROM drive. I thought that sounded like a good idea since it makes some terrible noises when a disc is in... anyway, I did the firmware upgrade and everything went fine. That's the only real change I can think of that might have contributed to this new issue.Anyway, after that I put 10.3 on it again (I had 10.4 on it before) and it wouldn't sleep correctly. Everything looks like its going to sleep ok, then the hard drive spins up, then back down, over and over again endlessly.
View 7 Replies View RelatedI am enjoying my Time Capsule and have kept it in front of me for the last week to see how it behaves. I have noticed that when I attach my other external hard drive to it it will behave exactly like the Time Capsule. By this I mean that after 2 minutes of inactivity they will both spin down but when it is backup time in an hour both will start up simultaneously and my attached external hard drive will get to speed and instantly shut off again while the TC does it's thing. My questions are, can this be stopped and why is it doing this? Surely it would not spin up the external drive along with the TC as spinning it up 12 times a day isn't doing the external drive any favors...
View 2 Replies View RelatedGoing to buy a new internal hdd, I have mac os x and windows installed on my stock internal. Any program that will allow me to transfer everything to my new hdd (obviously I'll put the backup on a external hdd) and then not have to install all the programs again?
View 5 Replies View Related^^ Basically says it. I just installed Leopard today and plugged my touch in for the first time since then. Itunes won't detect my iPod though. iPhoto tries to import pictures from it and it charges but iTunes won't detect it.
View 10 Replies View RelatedI have installed 4GB of extra ram to my MBP 13" (late 2010) to increase the performance of virtual machines. Though the VirtualBox doesn't recognize the 8GB of ram when i try to create a new machine for Windows XP 32-bit or Windows 7 64-bit. I haven't tried it with other operating systems. I have also reinsalled the VirtualBox but it didn't work.Â
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
The 160GB HD on my 2x2GB G5 has only got 7.9GB left due to memory intensive software: FCP, Logic 8 etc. I therefore installed a 2nd drive, a 500GB HD, bought from an Apple store. Its icon sits on the desktop, so everything is fine.
I am self-taught with everything computer and usually find answers in my computer books, but not this time.
How can I now utilize the new 500GB disk as my working disc?/Startup disc? I believe, the OS + other software must be installed on the new drive, or can it be transferred from the nearly depleted 160GB drive. I do not have much content in photos or other files on this drive, its mainly software.
I edit FCP on external LaCie drives (300+500GB)The newly installed disc does not show up on in preferences/startup disc panel, probably because it does not contain the OS.
I bought the PC version of the ATI Radeon HD 4870 and flashed it with the mac ROM. Everything went fine. I then moved the original card to slot 2 and put the new ATI card into slot one. I connected the monitor to the new ATI card and booted up. I get the apple logo, but after that, my monitor loses signal. If i plug the monitor into the original card (which is now in slot 2), it works fine. The desktop shows up. Any ideas on what is going on here? Is there anyway to check what hardware is installed in the computer? Any utilities?
View 1 Replies View RelatedI just installed Microsoft Office 2004 for Mac on an iBook with a G3, 500 Mz processor and 384 MB RAM running OS 10.3.9. One of the components was MSN Messenger version 4. When I opened it, it said a newer version was available so I downloaded and installed version 5 for Mac. But the icon in the dock continued to be for version 4 and each time I clicked on it I was prompted to once more download the newer version.
I did this several times, then deleted the version four from the applications and from the dock before reinstalling the version five. This time the messenger is on the computer but is not in the applications nor in the dock. Where is it so I can drag its icon to the dock? I know it is on the computer because when I clicked on recent items it opened, and also when I reinstalled again it opened, but I can't find where it is hiding.
So I just installed windows 7 x64 (bootcamp) on my iMac 27" mid 2010.
It seems to be taking up 11 GB more than there really is on the partition.
Partition size: 33 GB
Used space: 22 GB (in reality 11 GB)
Free space: 11 GB (in reality 22 GB)
I know for a fact that a newly installed windows 7 is not this huge.
Also I selected all the folders and checked the size and it simply doesn't match what the Drive Properties tells me.
I notice that any new apps I try and install aren't launching.I tried to install the 30 day trial of Textmate and when clicking on App in Applications folder the icon just bounces on the dock permenantly.Clicking it again makes it disapear form the dock. I then tried to install BetterTouchTool and when I click on that absolutely nothing happens.Any apps installed prior open up fine.I did a Repair Disk and Disk Permissions, but nothing.I know it may be a loaded question potentially based on other apps I have installed, but hoping someone else has encountered and can at least point me on the right track.
Info:
MacBook Pro, Mac OS X (10.7.2)
So everything installed on my Lion iMac works absolutely fine. However, I recently tried to re-install Appfresh (an application updater), so I used Appcleaner to uninstall it, grabbed a new download, dragged it to Applications as normal, double-clicked it.. nothing. The icon sits in my dock, and the indicator pulses, continuously, but the application never appears. It's not in the Force Quit menu, and Activity Monitor has no trace of it either.Â
I thought, okay, something up with Appfresh. But I've since tried a couple of other apps, and a game (Botanicula), and the exact same thing happens. I've done nothing new in the way I've installed them, opened their .dmg files, and dragged the application into Applications, completely normally, but they all do the "sit in the dock and nothing else" thing. If I left-click them once in the dock, they vanish, and that's all I hear of them. I've tried Disk Utility to do both verify and repair permissions to both the disk and the partition, but that hasn't solved the problem. I'm running the latest 10.7.3 with all patches to remove Flashback, etc.Â
The old one crapped out on me, so I installed one from OWC on a iMac6,1, I have taken it apart many times to disconnect it and reconnect it. Could the ribbon be bad? If so, where can I get a part number? Or is it a generic ribbon for superdrives?
View 2 Replies View RelatedNewbie from windows to Mac SL. I download two programs for my Cannon scanner and found them installed in Applications. I created a new folder called Cannon and moved both programs into it. In the folder, there is now a file called "Open in Finder" as well which I did not add.
Question.
1. Is it ok to move files into a new folder this way?
2. Is it normal to have "Open in Finder" also inserted in the folder?
Reason I am asking is, when I initially run the scanner program I get this multiple colour ball momentarily. It is almost as if the OS is looking for the location of the scanner program - similar to an hour glass in windows. Therefore, should I delete the folder I created and reinstall the scanner programs? If so, should I delete the programs first, then the folder, or go ahead and delete the folder with the programs in it?
First, I'm a noob on MACs so forgive the nooby nature of the question.
I'm setting up a printer on a Macbook to use a printer shared from Windows 7. Followed the tutorials I found for the network side of things and that seems to be fine (Mac send unprintable files to the Windows print queue).
The problem is the print driver on the Mac. The printer is a HP PSC 1315. It's not on the list when you Select Drivers during printer setup and even after loading the HP 111 updated, still no joy.
I downloaded the 1315-specific driver package and ran the installation but I have no idea how to find the driver to use during printer setup.
When I install new applications on my MacBook Pro, the icons are missing and instead, showing the generic "App" icon.Â
Info:
MacBook Pro, Mac OS X (10.5.4)
Okay so my 2009 MacBook pro would not start up, took it to the genius bar and they said I need a new hard drive. I installed a Western Digital blue Scorpio one from Best Buy and now when I turn on the computer I just get a flashing folder with a question mark. I've tried holding down c or option when rebooting, and rebooting with and without the OSX install DVD. I'm never given any options and it either starts up to a blank screen or to the question mark.
Info:
MacBook Pro, Mac OS X (10.6)
