I have installed 4GB of extra ram to my MBP 13" (late 2010) to increase the performance of virtual machines. Though the VirtualBox doesn't recognize the 8GB of ram when i try to create a new machine for Windows XP 32-bit or Windows 7 64-bit. I haven't tried it with other operating systems. I have also reinsalled the VirtualBox but it didn't work.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
So, I have a 13" white MacBook that is about three years old. Recently, the Combo Drive stopped reading CD-Rs (possibly all discs in general, but I only ever use it to burn CDs, so I wouldn't have ever known), so I decided to try to install a new Super Drive myself.
Following a guide on [URL], I installed the new drive, but when I turned my computer back on, it was not recognizing the drive at all. System Profiler was saying "This system does not contain any ATA devices. If you have any ATA devices installed, check that they are connected and powered on." I was then able to reinstall my old Combo Drive, which my computer recognized immediately. Thinking that I may have just not connected something tightly the first time, I tried a second time. Same thing happened.
So, my question is, is there anything I may be missing or does this definitely mean the drive is defective? I just want to make sure I'm not sending back a functional drive before I go ahead and do so.
I have the 13" MacBook Unibody with the 250 GB HDD. I wanted to replace that with my Seagate Freeagent Go 500 GB external HDD. I took off the enclosure and replaced the 250 gb with the 500 gb but the computer won't recognize the new 500gb HDD. All I get is a blinking question mark during start up which I know stands for HDD issues. The 500 gb HDD is working fine btw, I tested it after I took it out of the enclosure.It is a Serial ATA 2,5" and works just fine. Is the Macbook 13" Unibody not supporting 500 gb HDDs maybe? I checked the specs for the MacBook Pro 13" which is supposed to be the same as the one I have and it does say that it supports 500gb HDD.
View 2 Replies View RelatedMy hard drive crashed after about a year and a half. So I bought a new one and installed it myself. When I turn on my mac now and hold C with the install disk in the drive it just spins for a while below the apple and then goes to the gray please restart your computer screen.
View 4 Replies View RelatedGoing to buy a new internal hdd, I have mac os x and windows installed on my stock internal. Any program that will allow me to transfer everything to my new hdd (obviously I'll put the backup on a external hdd) and then not have to install all the programs again?
View 5 Replies View Related^^ Basically says it. I just installed Leopard today and plugged my touch in for the first time since then. Itunes won't detect my iPod though. iPhoto tries to import pictures from it and it charges but iTunes won't detect it.
View 10 Replies View RelatedI've been trying to install Ubuntu 10.10 on VirtualBox. However, when I try, even in full screen, it only shows a part of the screen. I know how to change the res if I could access the menu, but I can't. Can someone help? BTW I can't finish the installation until res is better so the set up window is still in the middle.
View 4 Replies View RelatedThe 160GB HD on my 2x2GB G5 has only got 7.9GB left due to memory intensive software: FCP, Logic 8 etc. I therefore installed a 2nd drive, a 500GB HD, bought from an Apple store. Its icon sits on the desktop, so everything is fine.
I am self-taught with everything computer and usually find answers in my computer books, but not this time.
How can I now utilize the new 500GB disk as my working disc?/Startup disc? I believe, the OS + other software must be installed on the new drive, or can it be transferred from the nearly depleted 160GB drive. I do not have much content in photos or other files on this drive, its mainly software.
I edit FCP on external LaCie drives (300+500GB)The newly installed disc does not show up on in preferences/startup disc panel, probably because it does not contain the OS.
I bought the PC version of the ATI Radeon HD 4870 and flashed it with the mac ROM. Everything went fine. I then moved the original card to slot 2 and put the new ATI card into slot one. I connected the monitor to the new ATI card and booted up. I get the apple logo, but after that, my monitor loses signal. If i plug the monitor into the original card (which is now in slot 2), it works fine. The desktop shows up. Any ideas on what is going on here? Is there anyway to check what hardware is installed in the computer? Any utilities?
View 1 Replies View RelatedI just installed Microsoft Office 2004 for Mac on an iBook with a G3, 500 Mz processor and 384 MB RAM running OS 10.3.9. One of the components was MSN Messenger version 4. When I opened it, it said a newer version was available so I downloaded and installed version 5 for Mac. But the icon in the dock continued to be for version 4 and each time I clicked on it I was prompted to once more download the newer version.
I did this several times, then deleted the version four from the applications and from the dock before reinstalling the version five. This time the messenger is on the computer but is not in the applications nor in the dock. Where is it so I can drag its icon to the dock? I know it is on the computer because when I clicked on recent items it opened, and also when I reinstalled again it opened, but I can't find where it is hiding.
So I just installed windows 7 x64 (bootcamp) on my iMac 27" mid 2010.
It seems to be taking up 11 GB more than there really is on the partition.
Partition size: 33 GB
Used space: 22 GB (in reality 11 GB)
Free space: 11 GB (in reality 22 GB)
I know for a fact that a newly installed windows 7 is not this huge.
Also I selected all the folders and checked the size and it simply doesn't match what the Drive Properties tells me.
I notice that any new apps I try and install aren't launching.I tried to install the 30 day trial of Textmate and when clicking on App in Applications folder the icon just bounces on the dock permenantly.Clicking it again makes it disapear form the dock. I then tried to install BetterTouchTool and when I click on that absolutely nothing happens.Any apps installed prior open up fine.I did a Repair Disk and Disk Permissions, but nothing.I know it may be a loaded question potentially based on other apps I have installed, but hoping someone else has encountered and can at least point me on the right track.
Info:
MacBook Pro, Mac OS X (10.7.2)
So everything installed on my Lion iMac works absolutely fine. However, I recently tried to re-install Appfresh (an application updater), so I used Appcleaner to uninstall it, grabbed a new download, dragged it to Applications as normal, double-clicked it.. nothing. The icon sits in my dock, and the indicator pulses, continuously, but the application never appears. It's not in the Force Quit menu, and Activity Monitor has no trace of it either.
I thought, okay, something up with Appfresh. But I've since tried a couple of other apps, and a game (Botanicula), and the exact same thing happens. I've done nothing new in the way I've installed them, opened their .dmg files, and dragged the application into Applications, completely normally, but they all do the "sit in the dock and nothing else" thing. If I left-click them once in the dock, they vanish, and that's all I hear of them. I've tried Disk Utility to do both verify and repair permissions to both the disk and the partition, but that hasn't solved the problem. I'm running the latest 10.7.3 with all patches to remove Flashback, etc.
Tried to add a new internal drive to my Mac Pro.
Processor 3.2 GHz Quad-Core Intel Xeon
Memory 8 GB 1066 MHz DDR3 ECC
Software OS X 10.9.5 (13F34)
I wanted to add a new 2TB internal drive and it won't read. Disk Utility shows the new drive but I don't have highlighted options to verify disk, repair disk, verify disk permissions or repair disk permissions. Here's the info: Name : WDC WD2001FASS-00W2B0 Media
Type : Disk
Partition Map Scheme : Unformatted
Disk Identifier : disk4
Media Name : WDC WD2001FASS-00W2B0 Media
Media Type : Generic
[Code] ......
Info:
Mac Pro, OS X Mavericks (10.9.5), Graphics ATI Radeon HD 5770 1024 MB
The old one crapped out on me, so I installed one from OWC on a iMac6,1, I have taken it apart many times to disconnect it and reconnect it. Could the ribbon be bad? If so, where can I get a part number? Or is it a generic ribbon for superdrives?
View 2 Replies View RelatedNewbie from windows to Mac SL. I download two programs for my Cannon scanner and found them installed in Applications. I created a new folder called Cannon and moved both programs into it. In the folder, there is now a file called "Open in Finder" as well which I did not add.
Question.
1. Is it ok to move files into a new folder this way?
2. Is it normal to have "Open in Finder" also inserted in the folder?
Reason I am asking is, when I initially run the scanner program I get this multiple colour ball momentarily. It is almost as if the OS is looking for the location of the scanner program - similar to an hour glass in windows. Therefore, should I delete the folder I created and reinstall the scanner programs? If so, should I delete the programs first, then the folder, or go ahead and delete the folder with the programs in it?
First, I'm a noob on MACs so forgive the nooby nature of the question.
I'm setting up a printer on a Macbook to use a printer shared from Windows 7. Followed the tutorials I found for the network side of things and that seems to be fine (Mac send unprintable files to the Windows print queue).
The problem is the print driver on the Mac. The printer is a HP PSC 1315. It's not on the list when you Select Drivers during printer setup and even after loading the HP 111 updated, still no joy.
I downloaded the 1315-specific driver package and ran the installation but I have no idea how to find the driver to use during printer setup.
When I install new applications on my MacBook Pro, the icons are missing and instead, showing the generic "App" icon.
Info:
MacBook Pro, Mac OS X (10.5.4)
I had to replace a dead hard drive on my old 2007 iMac. Now I am unable to install Office 2011 on an iMac that had this version of office before the old HD died. I know there are restrictions on the number of installations. Must I purchase Office 2011 again or is there another legal option?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.2), 3.4 GHz Intel i7, 16 GB DDR3
This is a really weird question, but here'goes: I just got my internal blu-ray burner. I hooked it up, removing the fans and all that jazz to get the SATA cable plugged in. Turned on the computer, and the drive was not recognized.
I know it has power, since I can operate it manually (but no disks inserted are recognized in System Profiler nor Toast). Oh, and in the System Profiler under Serial-ATA it does list 6 ports (though 2 with hard drives, 1 and 4-6 are empty).
I fiddled around, made sure cables were plugged in, still nothing.
Then I tried to just plug in one of my extra internal hard drives through the connectors I was using for the 2nd optical drive (power and SATA cable). It won't recognize the hard drive (doesn't seem to even know it's there).
an extra themes be installed in iMovie? These would be in addition to the standard ones like filmstrip, post cards, ect. I am wanting a wedding based theme for doing my wedding video.
View 4 Replies View RelatedHow do I install memory in my mac osx
Info:
iMac, Mac OS X (10.6.8)
The extra memory just came for my new Mac Min i, and I can definitely say that it speeded things up. When I posted earlier about being disappointed. that was with 2 gb stock memory. I put in a total of 4 gb today. Turns out, now get this, if I had ordered the mini with 4 gb to start, it would only have cost $100 more from Apple. Getting it from OWC cost $120.00. Apple would have been cheaper on memory! Go figure. Anyway, 4 gb seems to be the sweet spot for general use like for me.
View 8 Replies View RelatedMy MacBook Pro, Mac OS X (10.6.8) was going slow. I decided to reinstall OSX. All my data was backed up to my compatible external HD. I then erased my MacBook HD, and reinstalled OSX off the install disc and bundled applications disc. I went through the steps to set up the administrator account, and did all the other things in the instal process. I then did all necessary software updates. When all that was complete, I connected my external HS and opened migration assistant, and imported all the data from the latest backup. I now find that all my backed up data from before is under a different user account - named as in the old OSX set up. How do I populate my newly installed iTunes and iPhoto with the imported data stored under the 'old' username? Shouldn't this have happened automatically?
Info:
MacBook Pro, Mac OS X (10.6.8), 2.66GHz Intel Core i7
An SD memory card 32GB that used work well, when inserted into the MacBook Pro reader slot is no longer being recognized by the computer at all:
it is not visible in Finder or Image Capture or iPhoto, now nothing/nada/zip…
I am away from home, travelling - not anywhere near an Apple store/Apple Genius or even my old external card reader or a camera wire - so can not try these either!
Have a MacBook Pro, 2 years old, running OS X 10.8.5...
Info:
MacBook Pro, OS X Mountain Lion (10.8.5)
I just bought 2 - 4 gb memory to ugrade my 2 - 2 gb memory on my macbook pro 13" early 2011. Installed them and rebooted. The About Mac still shows 4 mb memory and looking farther it shows it has 2 - 2 mb memory. Also, now when I close the lid on the computer and it shuts down completely and not just go to sleep. i do not know if the two are related.
Info:
MacBook Pro, Mac OS X (10.7.4)
My questions is what size of max memory and hdd could be installed in a A1181 white Macbook with 2.16Ghz (4MB L2 cache CPU) and GMA950 VGA? It is a 2007 model. Currently I have 2x1GB DDR2 667Mhz and 160GB Samsung SATA hdd.
View 10 Replies View RelatedI am about to install a new (blank) hard drive to my existing 2009 Mac Pro. The Drive will then be used solely for windows (won't be a partition, but a stand alone drive, separate from my other drives which are Raid).
On the apple web site, it says that the OSX software installed will provide drivers etc. Does that mean that I should:
1) connect the drive
2) format the drive under OSX
3) run the bootcamp assist...
I have a MBP and I want to upload pics onto it from my SDcard from my camera. I put it into the memory card slot and i dont think it is recognizing it? Im not really sure what to do
View 24 Replies View RelatedI am thinking about getting a 15 inch MBP and a Sony Bloggie Video Camera. I was wondering if the sony bloggie takes sd or if the MBP recognizes Memory Stick in the SD Card Slot?
View 9 Replies View Related
