if there is anyway to lock the wifi card of my macbook to only use (a) 5.2ghz ?
At my work place we have a lot of repeaters and some are on 5ghz and some on 2.4ghz, On my pc I can manage the driver settings to only run on 5ghz and the result is a much faster connection with better perfomance than my macbook air.
Info:
MacBook Air, Mac OS X (10.7.3)
I have a macBook pro, running Yosemite, and cannot connect to 5GHz on my dual band bt home hub. Keeps saying 'invalid password' even though it is correct. I have given the 2GHz and 5GHz separate names and passwords and can now connect to 2GHz without dropping al the time, but am frustrated re 5GHZ. Even when stood next to the router it will not connect or recognise password.
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.2)
I remember reading in thread that you can do this, but I cannot find it. So how do I check if I am using a 2.4GHz or 5GHz internet connection?
View 4 Replies View RelatedI installed a WRT400N router via my PC several months back and used an adapter to utilize the Dual Band, Wireless N network. The product worked very well on my PC.
I recently bought a 27" iMac. It easily connected to the 2.4 Ghz Wireless N network. Performance and reliability are both good. However, I cannot see the 5Ghz network listed as an available network. Video streaming is not as good without the 5Ghz network.
Supposedly the 27" iMac (with built in wireless N) can achieve the Dual Band connectivity with Airport Extreme...but I do not want to spend money to replace a perfectly good router.
macbook air only connects at 130 M/Bits on a 5Ghz wifi connection, all other devices including pre unibody Macbook connect at 300M/bits ?
View 6 Replies View RelatedI'm encountering an issue with a new Macbook Air and would grateful for any insights. I have an Airport Extreme (latest model, 5th gen, A1408) based network (all updates applied). I have a new 2012 MacBook Air (11") that I noticed was suffering from VERY slow wifi speeds. After looking into it, I realized that if I used the configuration utility to separately name the 5GHz network and connect to wifi on the 2.4 Ghz network, the speed radically improved.
To illustrate, using speedtest.net, I saw download speeds of 35-38 Mb/s using the 2.4 Ghz network. This drops to 2-3 Mb/s when using the 5 Ghz network. The Macbook Air is showing an RSSI value of -56 when connected via 5 GHz and -51 when connected via 2.4 Ghz.
Other deivces in the home have normal connection speeds on the 5 GHz network, as does a previous generation, 2011 MacBook Air.A friend's also new, 2012 11" MacBook Air exhibits the same symptoms, so the issue is not specific to my unit.
Info:
MacBook Air, Mac OS X (10.7.4)
So I'm trying to connect my MBP to my new Belkin Double N+ (F6D6230uk4) router. I have 2.4 ghz set to b/g and 5 ghz set to n and 20/40hz bandwidth. Last night, when I connected to the router for the first time, I was showing 300mbps, when you Options+click the Airport icon. However, now I'm only showing 145mbps. To be fair, I may have changed a few settings between now and then, but I have no idea how I was able to get 300mbps before. It's as though it's only connecting to one channel, instead of two, which is required for 300mpbs I think?
View 2 Replies View RelatedRecently my dad inherited an iBook G4. The Airport works, but it seems to accept the signal broadcast from only one of the two wireless access points in the house. The two routers are being used to extend the coverage, i.e. iStumbler and Airport Radar show two entries, both with the same ID.
My Macbook is fine; I can move from one end of the house to the other and signal remains high. The iBook's signal gets weaker as it moves from the router on that side of the house. Is this a hardware issue (specifcally, the iBook's Airport), or is there a way to specify which access point to use?
[URL:...] over on engadget today was this article, setting up a dual band (for those that havent yet bought apples new extreme). I have a question about doing this. Here is my set up.
1 mac mini - ethernet to router
1 printer, attached to mini, sharing on network
2 laptops using wireless n - main computers
1 laptop using b/g
2 iphones using b/g
1 express b/g to stereo
$10000000 to S. Jobs.
will doing this dual band set up essentially mean i have two independent networks? I would like to have my printer, mini, and wireless music appear on all set ups.
I have just got hold of an BT HomeHub2 and already have a single band Time Capsule. Having read a few posts it looks as though it's possible to use the HomeHub for my g devices and the TC's n network for my Macs. After hours of playing around I've achieved the following: BT HomeHub set up as one network and able to take g and n clients TC set up as a secondary network but limited to n clients.
My TC is connected to the HH via Ethernet and in Bridge Mode When on the N network the iMac has the same router IP as the iPhone which is forced on the HH network I was hoping that g clients on the HH Network would, via the Ethernet bridge, be able to connect to the clients on the TC n only network. However, with my current set up this isn't happening. My Airport Express which I use for AirTunes is an old g type and my iPhones are obviously g. As a result if my Mac and Mac Mini are on the TC N network then they iTunes can't connect with the Express and apps on my iPhone that connect across wi-fi to the Mini can't do so. Apart from getting a dual band TC is there any way I can get what I want (my Express and iPhones not pulling down the n network to G standards)? I guess I could bite the bullet and get an n AX, leaving just the iPhones dragging things down when they're in use. The reason for me wanting to do this was because AirTunes often cuts out (desired solution wouldn't solve this but TC backups are probably causing heavy network traffic when I'm streaming music), I get a poor wi-fi signal in the garden and iTunes Library sharing between iMac and Mini is unreliable.
I upgraded my Time Capsule and two AEBS. BIG MISTAKE. Since upgrading, my wifi has been jacked up (Needing reset randomly) & wireless time machine backups keep dropping in error. I have the TC as the main and the AEBS are in bridge mode. I have heard of people downgrading their firmware with success, but the dual band software seems to have this problem across the board.
View 1 Replies View Related Having come across this article the other day[URL], I decided to blow the dust off of my ancient, Netgear WR814v1 wireless router in an effort to optimize my home network. My primary router, an older AEBS (802.11n), had been using a ratio mode of 802.11n (b/g compatible) @ 2.4GHz, so that I could connect some not-so-new devices such as my iPhone3G and my Wii.
If i can configure this Netgear monstrosity to my current network and have it broadcast at 2.4GHz, I'd be free to bump my AEBS up to 5GHz and enjoy significantly faster speeds overall. The only thing connected at 5GHz would be this - my shiny, new 15" MBP 2.66. The Netgear unit would be set in bridge mode (or its ancient equivalent), and would handle the lesser capable gadgets, including the iPhone, which would still be able to be used as an itunes remote and all that other lovely stuff.
Hardware Overview:
just wondering what is the maxmum and type of RAM I can install in this puppy. I wanna go big, any tips? What brand is the best?
Model Name:MacBook Pro
Model Identifier:MacBookPro4,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.5 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache:6 MB
Memory:2 GB
Bus Speed:800 MHz
Boot ROM Version:MBP41.00C1.B03
SMC Version:1.27f1
Serial Number:YD84*********
Sudden Motion Sensor:
State:Enabled
As I wait for my Apple Extreme Base Station, I was wondering if it would make sense to create two different SSID networks. One Mixed b/g for 2.4GHz devices and another one solely for 5GHz. I know my ATV2 supports 802.11n in 5GHz. As I go down my list of devices in my house, I can't tell if my MacBook Pros support the 5GHz. Both MacBook Pros are Mid 2010 models.
The reason for creating two different networks is that the AEBS downgrades your network based on the lowest device (i.e. b/g would be forced on a n device if such device connects to your network).
although sold with only a maximum of 8gb memory available, there are 16 gb options (2 x 8 gb memory) commonly available.Is this OK to do?
View 6 Replies View Relatedver. 10.7.3: 2.4 GHz core 2 Duo with 4 GB of DRAM. I have three questions: 1. Where can I find the manual for my machine i.e. hardware manual and or consumer/connaisseur manual? 2. Does it have a zip media drive? I'm looking at the left side of the machine and I see small square shaped slot for a disk of this sort. I know this is a common type of media storage for cameras and would like to confirm that it is zip. 3. And while i'm at it, could you remind me of the uses of the two ports advancing towards the back of the computer next to the USB inputs.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I am looking for a PDF of the Applecare service manual for the 15" mid-2009 Macbook Pro (specifically the 2.66ghz version).tell me where I can find one?
Or better yet, does anyone have a copy of the PDF that they could send to me?
I just got this Refurb MacBook Pro 15in. 2.66Ghz 32GB HDD and 512MB NVIDIA GFX. And my computer went into sleep mode and when I plugged it back in I had to do a manual reboot because the mouse wouldn't move.. So, I turned it back on let it die to see if it would happen again, and then the computer didn't even go to sleep mode.. What is going on? What should I do?
View 7 Replies View Relatedmanual eject doesn't work either!
Info:
MacBook Pro, Mac OS X (10.6.7)
i have a blackbook 2.4ghz and i am wondering if i upgrade to 4gb ram would i use 3gb of ram or use the whole 4gb?
View 24 Replies View RelatedI'm looking to grab one of these new MBP's in the next few days, but as an admittedly,.I'll be mostly using my MBP for DJ and Logic work, as well as the occasional Illustrator or Photoshop project, along with some movie watching. No games or 3D stuff necessary..66 make a justifiable difference over the 2.4? I'm planning on getting 8gb with the 2.4, doing the 7200rpm upgrade and getting a HR screen on whichever one I choose, but just wanna make sure my going with a cheaper processor and more RAM isn't shooting myself in the foot down the road more than getting a slightly faster proc with less RAM.
View 7 Replies View RelatedIf I launch an app to do some video editing, does the MBP automatically switch to the higher-end graphics card? Or do I have to manually switch from "better battery life" to "higher performance"?
View 5 Replies View RelatedI want to be able to print only a certain selection of text on a website. Let's say the second paragraph or the address of a place. I can highlight it, but don't know how to print just that selection. I can do this on a pc by selecting "selected" when the pc print options come up. Is there a similar way in mac or do I need to copy and paste to Pages and print from there?
Info:
MacBook Air, Mac OS X (10.7.4)
Quote:
2.0GHz, 2.4GHz
The number stand for different version? The larger the number, the better it is? What does GHz stand for?
the 2.4Ghz Macbook Pro from October 2008, and I was planning on getting 8GB ram, I was wondering if it is possible for me to get 8GB or is 6GB the max for me. I'm running 10.6.2 if this makes a difference?Also if 8GB is not possible for me, and I'm gonna lose dual channel anyway, should I get one 4GB and have 5GB total, or is 2X2GB (retain dual channel) better than 5 (4GB + 1GB) or 6GB (4GB + 2GB) of Ram?
View 5 Replies View RelatedSo I'm trying to manually update Graphics driver in Win7 32bit for the Macbook pro 13" mid 2010 version with the Nvidia 320M video card. I download and get this driver: 257.21_notebook_winvista_win7_32bit_international_whql
But it doesn't help me at all, says it can't find any drivers compatible with my hardware, even though I selected all the right menus for my card. I'm trying to play this one game, but it's bugged and I figure if I install a driver that's 5 months more recent it might help.
how to create new contact in address book without manual entry.how can you just drag or transfer all information from mail in your inbox to a new contact in address book
View 1 Replies View RelatedRefurbished MacBook Pro 2.4GHz Intel Core i5
15.4-inch LED-backlit glossy widescreen display (1440 x 900 pixel)
4GB (2 x 2GB) of 1066MHz DDR3 SDRAM
320GB Serial ATA @ 5400 rpm
8x double-layer SuperDrive (DVD?R DL/DVD?RW/CD-RW)
NVIDIA GeForce GT 330M graphics processor with 256MB of GDDR3 memory
$1529
Refurbished MacBook Pro 2.8GHz Intel Core 2 Duo
17-inch high-resolution LED-backlit antiglare widescreen display
4GB memory
500GB hard drive
8x SuperDrive (DVD?R DL/DVD?RW/CD-RW)
ExpressCard/34 slot
Built-in 8-hour battery
NVIDIA GeForce 9400M + 9600M GT with 512MB
Illuminated keyboard
$1799
Which would be the better choice? Is the price difference justifiable?
I am a photographer so I do a lot of tethered shooting through capture one and a lot of photo editing in Photoshop. I have an eizo 24" external display I can hook up to but I feel the 17" with its high resolution and anti glare would be useful for location shoots so my question: Is the higher price and old technology worth it for the bigger antiglare screen and bigger harddrive for what I am using it for?
My 15'' 2.4ghz MacBook Pro will only wake up from sleep about 50% of the time. I have tried waiting for several minutes, but the only solution seems to be holding down the power button, and then restarting. Is there anything i can do to fix this?
View 24 Replies View RelatedJust wondering if its possible.. looking on one of the memory merchant sites it looks like only 1GB PC2700 DDR RAM modules are available.
I have 2x1GB sticks in it already. Is it possible to upgrade to 2x2GB's or is this not possible
Would appreciate any clarification on this.
