My macbook pro is stuck at a white screen and doesnt boot. I tried resetting, tried to safe boot by pressing shift, nothing works,. It is stuck in white screen.
Info:MacBookPro, Mac OS X (10.7.4)
When choosing to shut down my MacBook Pro it closes everything and then gets stuck on the white screen. Unless I press continuously the on button it just stays there...
Info:
MacBook Pro, Mac OS X (10.7.4), 15"
Whenever I on my MacBook it gives off this white screen as seen in the pic. I tried command+r and holding down the option key on startup but it still leads me to this white screen.
Info:
MacBook, Mac OS X (10.7.2)
My MacBook Pro gets stuck at startup, the screen goes white every time and even when i shut it it's still stuck white and the apple on the back stays lit.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.3)
I have a unibody macbook and today it was working fine, then tonight i opened it up it was frozen so after a minute of trying to get it to work with no sucess I held the power button until it turned off. when I tried turning on again the screen stayed white and would not turn on. So i turned it off and held option and the scary part is the osx partition is gone but my window partition is still there Im posting this from the window partition. How could it just randomly dissappear I didnt even use the windows part for the past month.
View 18 Replies View RelatedOk, last night there was an update for OSx Lion. I installed the 3 items, it said I needed to restart, which I did. When it restarted there was another box, which was checking the updates or something. After that finished, it logged into my home screen, and I shut it off. Today, I tried turning it on and it was stuck. After 10 minutes, I held the power button to shut it off and try again. I did this twice, and on the third time a loading bar showed up at the bottom of the screen, went for a while and almost reached halfway, then it dissappeared. I waited, but nothing happened. What's wrong and how to I fix it? I think its 10.7.3, but it might be 10.7.2 I'm not sure what the difference is.
Info:
MacBook Pro, Mac OS X (10.7.3)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
Turn on computer gets to login in screen. Put in password. Stuck on white screen. Upon logging in. It says we need to delete files. We can't delete files because stuck on white screen.
Info:
MacBook Pro
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I have a 13" macbook pro, i was using it one night and was runnung ok until i come back to it the next morning.I opened the lid but the backlight didnt come on but could just see the screen so i re-started it by holding down the power button and then thats where it never worked again for me. I have followed some of the tips from some forums but i have no luck.i used another hdd for my mac to use on as its bigger GB than the original,ive been using that for 5 months with no problems, now my mac wont show any of the hdd's even the orginal one that wasnt formatted. Ive managed to format the original one but its not showing that one niether.the second hdd ive left with the snow lepard on it. Now with the other mac ive plugged them both in externally and shows up on desktop but still no luck on the mac thats down. Ive even tried with the installation cd that shows up on startup management but nothing eles.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.5.1)
I ran software update and got (iPhoto, itunes, Security patch) so I ran it and downloaded everything except the Intel Security Patch. So I restarted and decided to try again. Restart didn't work as it got stuck and I had to reach around and restart by holding down the power button. When it came back up, I got the white screen with the grey apple logo and the spinning clock like icon..... spinning and that is where I am stuck, left it off all night and tried it in the morning, same thing.
I did try:
-resetting pram (nothing happened)
-restart in safe mode, holding down shift key (nothing, stuck on screen)
I would try to start up from the OSX disk except I have a DVD in the machine. I am thinking it was that security update that didn't download fully that is doing this but how do I get the imac, "unstuck"? or how do I manually eject that DVD to put in a OSX start up disk?
Last two days, I notice that my MBP gets stuck at the white Apple startup screen until I reboot. I've also notice getting the beachball, even when using Firefox.
View 11 Replies View RelatedI got my IMac 3 years ago just recently started running slower in the past couple months, nothing too bad though. However just yesterday it became unbearable to use. 10 min to start up, once it was on took forever to open up any files etc. So I did some research online and I decided my best option was to reinstall the OS with my startup disk. I did that and erased all my harddrive (nothing important on it.) After doing that it ran great like brand new. Today I turn it on, it continues to work great for a few hours then it freezes in me. I held down the power button to restart. Turned back on and it was stuck on the white apple startup screen. After 15 min I decided to power it off and let it rest a while. After resting it still won't start up.
View 4 Replies View Relatedso i have a macbook pro, running on leopard.(i think, dont know if its leopard or snow leopard). Anyway, when i try to reinstall, i put the retail leopard disc in, pressed install mac osx, and pressed restart. Then it will just be stuck in the white screen forever! i tried pressing the option key, but it only shows Macinsosh HD and not the leopard disc. taking it back to apple store is not an option for me, the warranty expired just months ago.
View 3 Replies View RelatedI have a Mac 10.4 (I would check but I can't get on my computer) had been running slow As I can see, many other Mac users have encountered the same problem that I now have: the dreaded �blue screen of death�. About a week ago, any internet browser that I tried to open (Safari, Camino) would freeze after loading its home page, and tell me that the application was not responding. After force quitting and restarting each program a couple of times, with no positive response, I decided to restart my computer to see if that would do the trick. Upon booting up, it then started the same sequence that it is still doing now: first a grey screen will briefly show, then a white screen with the apple logo and a turning dial beneath it.
Then my computer would go to a blue screen with a turning dial under it, where it would freeze and just keep showing the turning dial. So I looked everywhere to try to find a solution. I came up with this
"OK, restart your computer, hold down Command-s and type in the following:...............
I have a 4 month old mac desktop that is stuck on a white screen.I already unplugged etc. and it does nothing. What do I do?
Info:
iMac
My problem is taht when i installed windows xp, which im thinking is SP1 cuz its so old, i think i partioned mac os x and now when i try to turn on my MBP all that happens is a white screen. and if i press option key no hardrives or systems show up even Mac OS X please im stuck:/. Also windows xp or mac os x is not loading up so im stuck on a white blank screen
View 21 Replies View RelatedMy brother got an iMac and yesterday he tried to install windows xp with boot camp. But unfortunately he made a mistake and the iMac shut down. Now the mac is stuck with a windows xp in it, and when he tries to start up the computer, it says "the start-up sound" and just stays with white screen. It sounds like the mac reads from the xp cd when it starts, but I can't get the cd out.I have looked everywhere and tried everything:
Hold down the primary mousebutton while it's starting,
Hold down "fn" and the "eject" button while it's starting,
and hold down "alt" while it's starting
I can't find any "pin-hole" to a paperclip or something.
the screen it got stuck on was white, gray apple sign spinning circle thing
and i left it there for more then half an hour with no progress. I did a hard shut off, and waited for about an hour and tried again. This time i waited for an hour, and still no progress. what should i do?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
Power just went out and now our iMac ('11) wont restart. When I power on, the start up sound plays and then a white screen with the apple and an spinning circle underneath. After 10 mins, I shut it down and tried again.
Info:
iMac
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick, that I can see best behind an all white screen, i.e. a blank page of a word processing document.
View 19 Replies View RelatedI've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick,that I can see best behind an all white screen, i.e. a blank page of a word processing document.
Anyone seen anything like this before. I can actually see part of it right on the white of the page I am typing in this thread.
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
View 1 Replies View RelatedMy step mom has an iMac. The first gen intel one and the other day out of nowhere there was a white screen with a folder on it and now when you go to start up the iMac the screen just stays white.. What would be the cause of this and what should I do to fix it .. thank you
View 21 Replies View RelatedMy MacBook is not starting up it is stuck on the white background with the apple on it, charger works fine. I'vev even switched it off from main so many times!.
Info:
MacBook (13-inch Mid 2010)
I just upgraded my MacBook with a larger hdd. But I forgot to put the plastic tray thing back on and the hdd is now stuck. How would I go about getting it out? I really don't want to have to take the laptop apart and it's not under warrenty.
View 2 Replies View RelatedWhen I go to front row, all my video content plays sound, but the picture is just a pure white screen (shows the slider to move chapters, etc., but the screen is just white).
Any ideas for solutions? I did google searches, etc., to no avail. I have a MP (not early 08), which I upgraded the graphics card to a 2600XT, and it's running Leopard.
there are two things that the macbook is doing to me. one is that sometimes when i move the screen up or down (the hinge is rather stiff) a white (thin) line flashes across the screen. but recently, while randomly browsing through the internet, the screen almost... i guess faded to a gray screen, but like gradually, and not like a kernel error, like the display just faded away. happened twice in a row, did a battery pull and now wont do it again.
View 6 Replies View RelatedMy screen just started to occasionally have a flicker of a white line show up...It doesn't happen that often, should i worry? Is it worth taking it into apple? (Under warranty still) Since its not consistent i wont necessarily be able to show them what its doing..
View 1 Replies View Related