After using time machine or anything plugged into my USB ports my machine will not shutdown normally, i have to hold down the power button and force the shutdown, or just sit and look at a spinning wheel.
Info:MacBookPro, Mac OS X (10.7.3), This also happened whilst operating
If so, do you use them and what sound system do you have?
View 2 Replies View RelatedMy iMac 27 late 2010 does not shut down when shut down in the normal way. I have to shut down with the push button. I have tried disconnecting all the usb connected hardware still no use. Can any body help.I have OS Lion 10.7.3?
Info:
iMac, Mac OS X (10.7.3)
My system has randomly shut down twice now in the last two days. Dual G5 2.3. I checked the console log, which I know very little about, and it said this:
localhost kernel[0]: ApplePMU::PMU forced shutdown, cause = -122
Two questions-
what's the -122 code mean?
Do you think resetting the PMU would be the solution to this?
I have the microsoft arc mouse and keyboard and each of them have seperate transrecievers. The macbook air only has two ports. If I bought a usb hub would this enable me to plug the transrecievers into the hub so I would have 1 usb port free? Im considering returning them and getting logtech's unifying transreciever, but they have no small keyboards that are compatible with it.
Info:
MacBook Air, Mac OS X (10.7.1)
My usb ports in my c2d macbook don' t seem to be working. When I plug in my digital camera (sony) or itunes phone (motorola), nothing happens. I tried both of these devices on my 2 old powerbooks and they sync fine. Anyway I can check whether my macbook usb ports are functioning?
View 2 Replies View RelatedWhen I plug a wireless USB receiver for my wireless mouse into my USB drive that mouse will sometimes jump and not work but if i push up on the receiver it starts working perfectly, any ideas on what to do, the receiver is about the size of a thumb drive.
View 2 Replies View RelatedOne of the USB ports are not working is there something I can do at home so I can avoid having to go into the Apple Store?
Info:
MacBook Pro, Mac OS 9.0.x
what is the best way to add storage to macbook pro without having to use the too few usb ports.
View 4 Replies View Related my usb ports on my macbook pro wont pick up anything i plug into them!
Info:
MacBookPro
Anything I insert an usb key in one of the usb ports, i can't see it on my desktop nor anywhere else except via Disk Utility, but there is no way I can access it! any ideas what could be happening?
Info:
MacBookPro, Mac OS X (10.7.4)
So I've been thinking about how i am going to be using my new MBA as my main machine for a couple of months and i currently use an external monitor with it.
The MBA is advertised to run an external, such as an ACD.
I jut looked at the ports and i find it really strange that the MagSafe connector is on the left, but the mini display port is on the right... Now you will have cables on both sides? How does this work with the set of MagSafe + display port + USB in an ACD? I don't think they are long enough to go around? Or would you have to plus in the other MagSafe and just use the right side for display port and USB. That is silly though.
Title pretty much says it all. Can anyone confirm that the MDP ports on the new MBAs support audio?
View 1 Replies View RelatedII discovered a very interesting anomaly with my mid-2009 13". I plugged my ipad in to syncs and charge, and the ipad said, "not charging." some research on the net yielded information that the iPad requires a higher powered USB port, which all late model macbooks have... All except mine apparently.....
So, I tried the other USB port, and low and behold, the ipad started charging. So the question is, is this the design of the MBP, or do I perhaps have a sub-optimal USB port?
Just wondering why does apple supply firewire ports on all their comps including laptops, because these days I can't find anything that has firewire ports that I will use everyday i.e. flash disc, HD, mouse etc. I know there's somewhere a 2.5" HD firewire case available but I already have a USB case for an external, and it would probably be more expensive to get it. What do you guys use firewire ports for?
View 24 Replies View RelatedI have a 15" MBP and am now having trouble discovering my printer on it. I have the printer connected to my iomega powered hard drive which in turn connects to my MBP via firewire 800. Earlier the printer was working fine when the iomega was connected via a USB port. BUt im short on USB ports (one goes to my Companion 5 speakers and the second to a 2nd display besides the mini DVI display) hence need to connect via firewire.
View 1 Replies View RelatedI have a Mid09 13in MBP.
I noticed that when I put it in sleep, the USB ports still get power. Is there a way to make it so they turn off when it sleeps? I have a cooling plate attached so I have to unplug it every time I sleep it, gets pretty annoying when I forget and I unplug the USB plug and the MBP turns back on. My mouse/keyboard are BT so it wakes it that way, not by USB.
And is it bad for me to have the laptop running with the lid closed? I don't know if the heat would affect the screen or not. I'm currently not doing this because I'm not sure about the effects of the heat on the screen, but I do use a cooling plate, average temps are 120-130*F.
When I plug an externally powered device (printer, external HD etc.) into my MBP via USB, there are small sparks around the plug and the plugged in speaker makes sounds. I think that this also caused my external HD to die.
View 3 Replies View RelatedI've got a macbook pro unibody and basically of the two usb ports. The lower one is working fine
but the top one is acting a bit funny. If I put my mouse or graphics tablet in there it doesn't work but if I put my phone or usb drive in there they work perfectly.
I was wondering whether trash and dust can damage the ports in the side of a MBP(or any laptop), let's say, if I'm using a Speck case around my macbook pro and put it inside my backpack, can the USB, Eternet, and so forth get damage in any way by the dust and small trashes(little bits of paper, things like that).
View 4 Replies View RelatedI have a macbook, and it only has 2 USB ports. My SuperDrive broke, so I have to use an external since I'm still a student (so I have an extremely tight budget). I have to use it to boot from the Mac OS X install dvd, so that's both my USB ports gone right there. And my Time Machine backup requires another USB port (since a WiFi drive is too expensive for me). Any way to have both of them running at the same time?
View 6 Replies View RelatedAbout to take the plunge and buy my first laptop (currently have a G5 PPC imac.) I'm planning on using Logic 9, Garageband and Sibelius, and recording live instruments. It will be my main computer, and will be moved about a fair bit. I'm going for a Macbook Pro since Apple decided to remove the Firewire ports from the Macbooks. Any thoughts on minimum spec? I can't decide whether to go for 13" or 15" - and would appreciate any ideas on what extras are really worth the additional cash (I haven't got an unlimited budget.)
View 6 Replies View RelatedI just bought a MacBook (13.3", 2GHz, 160GB, 2GB Aluminum, Late 2008)on ebay and at first the usb ports seemed temperamental. Now they only recognize my mouse and no other hardware (camera, usb stick etc). (It is running snow leopard.)
View 1 Replies View RelatedThe ports on my MBP 13" don't line up correctly. Comparing it to my om's MBP, it looks like the top case is to blame, and not the logic board. All of the ports that I tested work. (Magsafe, SD card, and USB.) Heres pictures of what I'm talking about. Even though it works fine, what should I do. Should a $1200 computer have this problem? Esp when already paying a premium for dated tech (CPU, Intel Core 2 Duo, small HD) It is hard to show you in the pictres, as the iPhone 3GS took the pictures. Lighting wasn't the best either. The ports were like that when I opened it up in the store. The store was busy, and I asked about it. He said the ports will still work fine, and they do, so even though they are not lined up correctly, they still function. The USB plugs also are fine. they don't run against the aluminum, so its not off lined enough to be an issue... yet.
View 4 Replies View RelatedHow can I look at what ports are open on my macbook. I know in Windows there is an application call Active Ports which views all port activity.
Is there anything similar....?
This just started about a month ago. When it first occured, I could restart the laptop and the ports would work. Now, no luck. Mac OS X - 10.6.8
View 9 Replies View RelatedMy USB ports aren't registering?
Info:
MacBook Pro
I recently purchased Thunderbold (TB) display and 17" Macbook Pro. My TB flickers quite often and disconnects. Then I have to power off TB and reconnect. All updates are current. Dont know what the issue will be. Is there any utility to check the condition of TB. I did not connect any peripherals to TB except the Macbnook Pro.
Info:
MacBook
Pro, Mac OS X (10.7.3)
In the last two weeks, every time I plug my Apple 27" display cables into my macbook (power, display and USB connections), I get the following error message on my screen about USB ports are drawing too much power. I don't have anything plugged into the USB ports on the back of my display.
Info:
MacBook Pro, IMac, Mac Mini, etc., Mac OS X (10.4.8)
how do i reset the USB ports on my MacBook Pro (13-inch, Mid 2010)
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.4)
