MacBook Pro :: How Can I Work To MBP With Higher PPI Than External Display?
Aug 13, 2010
I'm thinking about updating my Macbook Pro C2D 15'', which is already 3 years old. I'm planning to get the 27'' Apple Cinema Display (finally!) when it come out later next month. I've decided that I'd go with 15'' Core i7 Macbook Pro, but couldn't make up my mind on the screen resolution; Standard 1440x900 or Hi-Res 1680x1050.The thing that really bugs me that the pixel-per-inch (PPI) of the MBP and ACD. The ACD 27'' has 108.79 PPI, with relatively close to 110.27 PPI on STD MBP, while the High-Res MBP will give me 128.65 PPI. This would mean that the text on the High-Res MBP screen would be a bit smaller.So, my question would be for the person who're using current ACD (24'' ?) with Hi-Res 15'' MBP or 17'' MBP (which has 113.xx PPI):1. Does the difference in text size seems noticeable when you switching from one screen to another?
View 3 Replies
ADVERTISEMENT
Jan 15, 2010
any ideas what the expectations are regarding a higher resolution display in the next 15" MBP?
View 24 Replies
View Related
Feb 23, 2008
The external 19" LCD display does not work with the lid closed. However, it does work in full 1680x1050 when mirroring is turned off and the lid is open. When I turn mirroring on and the lid is open, the external display does not work at full 1680x1050, it shrinks the external view so the resolution is 1680x1050 but only displays 1280x800 worth of pixels.
Summary:
* lid closed, mirroring on, external display does not work (goes into "out of range" mode)
* lid closed, mirroring off, external display does not work (goes into "out of range" mode)
* lid open, mirroring on, external display will not do a full 1680x1050, instead will do 1280x800
* lid open, mirroring off, external display will do a full 1680x1050
A USB keyboard and mouse are attached. This exact setup worked flawlessly with a gen1 macbook pro out of the box.
How do I make the display work with the lid closed?
View 10 Replies
View Related
Nov 11, 2008
I have a white plastic macbook which appears not to be able to connect to my wireless network. All the other PCs and a Mac Mini in the house connect fine, but the macbook does not.It has connected since i got it, both to the home network and a network in school, but today it promted me for the wireless password, connected a few times but did not give me a IP address, and now will not connect at all! The network appears in the list, i click on it, enter the wireless password, then it says connecting before connection failed.
The network setup is a Cisco router connected to the modem and then connected to the wireless too. There are no computers connected via cable to the network.
View 2 Replies
View Related
Nov 1, 2009
I have a mbp 15" and it runs at 1200 x 800 (for example)let's say I have an external monitor which is 24" Can I run that external monitor at 1900 x 1200 (I don't know the real resolutions)would it work? If not, why? Is there a way I could make the MBP run at a higher resolution so it looks like iMac resolution?
View 9 Replies
View Related
Jan 11, 2009
Will the external display work while I boot from the Leopard DVD? My MacBook Pro screen is broken and I want to make an .img file of my HD before I install the new LCD.
View 2 Replies
View Related
Jul 19, 2010
My Macbook is brand new! (Barely 4 months old) Just recently my laptop will flash a black screen. It starts from the bottom and quickly flashes up the screen higher and higher each flash! i have read on some other pages it is a bad inverter on the inner core of the Macbook. Other than that I do not know what to do!
View 3 Replies
View Related
Sep 4, 2014
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
Info:
OS X Mavericks (10.9.4)
View 2 Replies
View Related
Mar 31, 2012
I'm using a Dynex Mini DisplayPort to DVI Adaptor to use a second display (an older display, I'll admit). After I have unplugged the adaptor, my MacBook still tries to read the second display, and switches back-and-forth between a blue screen & my desktop. It stabilizes once I plug the adaptor back in. What is causing this problem, and how do I fix it so I can use my primary display without having the adaptor constantly plugged in?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 19, 2012
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
Info:
MacBook Air, Mac OS X (10.7.4)
View 3 Replies
View Related
Feb 22, 2012
I have a 2008 black macbook with 10.7.2 installed (2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM). When I press caps lock, no green light turns on and letters remain in non-capital form. Even when I hold Caps lock for a few seconds, nothing happens. If I physically connect an apple keyboard via usb to my computer, caps lock doesn't work.
View 4 Replies
View Related
Mar 2, 2009
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
View 4 Replies
View Related
Apr 5, 2010
i'm hoping someone can help me out on this little problemmy usual set up is a pair of speakers connected with jacks via an m-audio usb audio interface, with an external monitor connected via mini-dvi to dvi.now for some reason my audio interface has randomly broken (on a side note, could a power cut have somehow broken a usb peripheral connected to my macbook whilst it was asleep?) so i've hooked up my speakers to the line out to rca. Now for some reason, when i plug the mini dvi connector into my macbook i get an incredible amount of hum. not just a little, alot!
View 1 Replies
View Related
Mar 5, 2012
I want to buy the 27" iMac - but only if I can use it as external monitor for my Lenovo laptop when working from home. A the Apple store in London they said that this is possible with a Belkin converter from hdmi to mini display port (with a USB power caple to turn it into an active signal). The laptop also has a displayport.
Info:
iMac
View 3 Replies
View Related
Jun 4, 2012
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
View 1 Replies
View Related
Jun 24, 2012
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
View 3 Replies
View Related
Dec 1, 2014
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
View 1 Replies
View Related
May 22, 2007
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies
View Related
Jan 23, 2008
Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
View 4 Replies
View Related
Dec 12, 2008
I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies
View Related
Apr 25, 2009
I am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
View 6 Replies
View Related
May 10, 2012
have had the macbook air connected to HD TV using the mini tv - HD connector, but it's stopped working. Tried ON-OFF, wiggling it, used Detect Display but it just won't find it any more. Last thing I did was download a movie using SKYGO last night, but don't see why this would effect it.
Info:
MacBook Air
View 3 Replies
View Related
Oct 26, 2008
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
View 2 Replies
View Related
Jan 13, 2010
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
View 3 Replies
View Related
Oct 1, 2010
My macbook pro 15's screen is dead and I don't want to buy a new one. I've been using it connected to my tv for a while now and the display has started to feel irritating and unnecessary so I wanna get rid of it completely.
View 6 Replies
View Related
Feb 7, 2012
Does my macbook work with the thunderbolt display?
Info:
MacBook
View 9 Replies
View Related
Mar 17, 2009
So my buddy brought over his first-generation-aluminum 20" cinema display. I have a DisplayPort to VGA connector, and a vga-dvi converter, and I plugged the cinema display into that. Nothing is showing up on the cinema display - it's just black.
View 2 Replies
View Related
Feb 25, 2010
I have a 15inch Macbook Pro from Late 2007; well it worked just fine yesterday, but as of this morning the display will not work! It makes the Chime when you power it up, but no screen display; you can adjust the volume buttons and hear that it is on and the volume can be adjusted. The screen brightener and dimmer does nothing, as well as the keys brightener and dimmer. The apple website said to reset the PRAM which I did and then if that didn't work to reset the SMC which I did and got no change in my problem. And now the part that boggles my mind is I have the cables to hook up the MBP to my TV so I figured I'd atleast be able see it on the TV if the display has crapped out but its doesn't transmit the image to there either. Is it possible I caught a virus that kills displaying ability?
View 4 Replies
View Related
Nov 10, 2009
I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
View 2 Replies
View Related
Feb 27, 2009
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
View 2 Replies
View Related
