My 1.5 year old MacBook pro has what I believe is a failing hard drive. What is the likelihood apple will replace the drive? It should still be covered under the manufactures warranty.I just think that 1 year and a few months is a little early for a drive to fail...
View 8 RepliesJust got one of the new 13 mac book pros and the apple salesperson told me if I do a ram or hard drive upgrade myself it would void the warranty? Is this true? I mean they show us how to do it here on the apple site. Looking to go to 8 gig of ram and maybe ssd drive but for sure 7200 rpm drive....
Info:
Mac Pro, Mac OS X (10.7.4)
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View Relatedso lately programs in my computer have frozen a lot and i get the beach ball often in safari. i just had my logicboard replaced because of flickering by Apple so i know its probably not that. so could this be a failing hard drive?
View 11 Replies View RelatedHowever, my hard drive appears to be running fine - haven't noticed any degradation of performance since receiving the warnings two days ago. And HD is still running quiet (no strange mechanical noises I'm accustomed to hearing prior to a failure). Nevertheless, I'm installing a new HD tomorrow and recloning it from a backup external drive (operating from external until then).
View 4 Replies View RelatedI purchased an iMac last October and my line of work demands extensive use of After Effects and Final Cut Pro. My iMac is fitted with the standard 1TB SATA hard drive, and lately I considered installing an SSD drive as I have been experiencing lags. In all my naivete I asked Apple Store/Service outlet where I originally bought my iMac, but they turned me down, claiming that "they are not allowed to order the extra parts and if they do proceed then my warranty will be void". Which means that about 2 years of AppleCare will go out of the window. I can always do it myself, but at the risk of damaging my iMac and facing a null warranty on top of it. I am still reeling in disbelief, is it really the case that Apple prohibits its customers from legitimately upgrading their computer at their own stores?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
i want to replace my macbook hard drive and want to clear everything on it but i lost my macbook (intel mac 2007)install dvd. can i use the macbook pro osx 10.6 install dvd instead. will it work? how can i start installation from the dvd with the blank hard drive?
View 2 Replies View RelatedI got the flashing file folder a few days ago. Tried to reinstall my software but no disk for install showing. Tech said hard drive is shot and won't power up. So while I mourn the loss of my MacBook but most importantly ALL my stuff (no, I did not have a backup like I know I should've), is replacing the hard drive something I can do myself? And, how do I know what hard drive i can put in since I was running out of disk space anyways and would like more..
Info:
MacBook
I just got a notice that my hard drive is failing. I can't access any of the data on it.I posted a picture of my problem here:[URL]I totally out of luck?
View 2 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedI have a vintage 2009 17" MBP with 320 GB hard drive.
Can I replace the hard drive with SS storage?
I recently bought a MBA but after some months the HD gave up. So I bought a generic Samsung HS082HB 1,8" zif HD to replace the broken HD. I thought I bought the right one but my MBA wasn't able to recognize the new HD. This new HD is a generic Samsung while the original was the one with the apple () printed on the label. So I ask you: do I need the certified one or did I miss something in replacing the HD?
View 4 Replies View Relatedim thinking of buying a new retina MBP but want to know how easy or difficult it would be to replace the hard drive if i wanted to upgrade it?
View 10 Replies View RelatedI just bought a new MacBook Pro. I had a 2010 MBP and kept the hard drive (Hitachi 500gb 7200 rpm) from that computer. It ws running 10.7 and worked fine. It still boots up perfectly on my MacPro so I know it works.
I tried to boot the new MacBook Pro using the old drive but I get a circle with a line through it. I have tried to boot using Firewire and even installed it into the new MacBook Pro. I then tried to re-install OS 10.7. I just downloaded it from the App Store for my MacPro so I tried to use it to re-install. It will not work on this new Macbook Pro. I had to download a version specific to this computer (using the "recover" disk). I takes 1.5 hours to download and then it still didn't work. When the computer reboots after the download and restarts I get the same **** circle with a line through it. The new "manual" is a joke. There is no reference to upgrading drives or memory. Did Apple decide to make their new laptops inaccessible to the owner? I can't find any info online and at the Apple store today they told me they knew of no reason that the drive wouldn't work.
Info:MacBookPro, Windows XP
After 4 years of brave use, the internal HD on my Macbook Pro has died. I'm now looking for a new one to install it myself. It's a first generation Macbook Pro (1.83Ghz - A1150). From a first google search I found this option a pretty decent one: [URL:...] Any feedback on this particular item? Is the site reliable? Also, regarding the installation of the drive itsef: I've seen some guides on how to install it and they seem a little hard to accomplish. My experience with this kind of procedure so far is related to installing ram, which seems to be really easier. Is this something that a non-experienced user can install or shall I think twice before doing such adventures myself?
View 12 Replies View Relatedcan i replace the hard drive in my mac with a seagate go flex 2tb external hard drive? The problem is that it requires external power.
Info:
MacBook Pro, Mac OS X (10.7.3)
I recently purchased a Patriot 16GB RAM upgrade (yes, spare me the Apple "Limited to 8GB" speech), and a new Seagate Hybrid drive because I'm out of space on my old one. I installed the 16GB RAM in my MBPro 15" (Early 2011...running 10.7.3) with no issue last night, and it was running fine and quite zippy. After Time-Machining, I replaced the hard drive today, and tried to boot from a backup Lion disc (to format the new HDD and restore from Time-Machine) to no avail. Then, when I switched to a Snow Leopard disc, I started to receive 3 Beeps...the infamous RAM beeps. I figured that the RAM that I was sent was bad, so I switched to my previous OWC 8GB set to the same result. The issue I'm having is that I took the Snow Leopard disc out, replaced the new hard drive with my old one, and viola everything is working perfectly. I'm even posting this on the same computer.
View 7 Replies View RelatedI just got a new WD external drive to put some media files on. I went into disk utility just to make sure the external was working fine before I started moving things over and it told me my internal hard drive in my 08 iMac is failing! Good thing I bought the external when I did,
View 6 Replies View RelatedI have a brand new MBPro15. The SMART status says I have a failing 7,200 RPM HD. Apple sent me a DIY for replacement. I am unable to run time machine for a backup. It receives and error each time. Most likely due to the failing HD. I was able to get all my important files backup to an external HD. Except for all my bookmarks, calendars, settings, etc. I do have a .Mac account with sync. I am hoping I can pull that data off and onto the new OSX. Is that possible? IS there any other way to transfer this important info before I replace the HD with the new one? Can I just make a clone of my current HD and put the OSX on the new HD? Or is a best to do a clean install, than transfer important settings and bookmarks?
View 1 Replies View RelatedMy friend has a black Macbook that is extremely slow. It takes about 10 min. to boot up (literally), and when it does finally boot up, the good ol' beach ball comes up whenever I click on anything to do anything.
I then tried hooking up to a new iMac as a target drive. I was able to read some of the hard drive, but the User folder was empty, so I could not retrieve any of the data. Also, trying to access the target drive and trying to eject it made the new iMac slow way down.
And the hard drive was making a faint chirping sound, and then it turned into a crunching sound (much like that of the old 4200RPM hard drives of years ago).
I tried resetting the PRAM and also reset the power management. I also did a Safe Boot...all to no avail.
The DVD burner does not work. So, I could not do a hardware test or an archive and install. However, since the hard drive is most likely failing, an archive and install would not help any.
So, I'm guessing that the hard drive is going since the hard drives in Macbooks have been known to fail (it happened to a daughter of a friend of mine).
Is there a software out there that will allow me to retrieve the data from the drive? Trying to avoid having to go to a data recovery place.
I have some complex questions regarding an iMac, a Time-Machine backup, and iTunes on an iPod. I live about halfway up an extinct volcano about 12 miles north of San Jose Costa Rica. Some months ago, we had a thunderstorm and as I reached to unplug my computers lightening struck about 50 meters from my house. I had an iMac with a 3-Tb external backup drive, a PC laptop and a laser printer on the same power strip.There was a definite surge and the light brighten and then power was lost for a few minutes.When power was restored, the PC and the laser printer seemed to work fine but the iMac was cold.Is is possible that the power supply was fried and not other essential parts? Would it be worthwhile to replace the power supply? Can I, with limited experience and tools do it or need I take it to a technician? My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk.Do I need to replace the hard-drive before taking it for service? How hard is that, can I do it? I have seen videos of the drive replacement on-line.If there is a saving grace with this it is that the Time-Machine backup seems fine although I have only accessed the data through Finder.I replaced the iMac with a Macbook Air with significantly less mass storage and I can't just move files to the Macbook. My problem is that I have an iTunes library of some 10,000 songs on the backup and until recently on a 160 Gb iPod which was old and it crashed.I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that.Can anyone tell me how I might do that or give me any insight into the process?
Info:
iMac
my old stock HD capacity is so small. and i want to upgrade/swtich to new 3TB ATA hard drive? it's possible?no issue with intel mac pro 2008? stock HD located in BAY#1 can i upgrade with new high capacity one? how to upgrade? step by step? do i have to move all content frm stock HD to new HD? and how? do i have to upgrade install new HD with disc utility ? how to change?
Info:
Mac Pro 8core, Mac OS X (10.6.2)
Mine is 2005 model mac mini.
Model Identifier: PowerMac10,1
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
this is an old machine, can i replace optical drive with sata hard disk 2.5'' with any size like 500GB, Internally not externally.
I'd like to replace (upgrade to larger drive) the hard drive in my iMac myself.
Info:iMac (27-inch Late 2009), Mac OS X (10.6.8)
took to shop to get hard drive replaced and noticed when home that there is a thin red line running down the display. shop had a hard time putting the 2 halves together again?
View 1 Replies View RelatedI was wondering if anyone had successfully installed and 2nd hard drive in their iMac?I have a 2 year old 2.8 24'' iMac and the performance just isn't cutting the mustard, it's all hard drive related and I already have a decent 1TB drive in there.I was thinking of perhaps swapping the optical drive with a second hard drive for RAID0, but not too sure if there will be space and was wondering if the optical drive is a standard SATA connector, or if there is some way I could run a SATA+power cables externally?
View 7 Replies View RelatedLately, I've been having trouble with my optical drive. It used to read ISO CDs, which it no longer can do. I assumed that was a software issue. Now it's spit out two DVDs and can't read them.
I'm starting to worry that the drive is actually failing. Is there a test I can do before I decide the drive needs replacement? If it's some kind of munged software or firmware issue and I replace the drive, I'm gonna feel like a doofus.
I'm outside of AppleCare now, so if it needs replacing, I'm going to have to do it myself.
I just replaced the hard drive (now I have 1 TB!), but that was relatively simple. I've never replaced a laptop optical drive before.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.3)
The Super Drive on my MBP seems to be completely busted, whenever I try to read a DVD or CD it takes the disc in, spins it around a couple of times and then ejects it again without ever coming up with any options as to what to do with the disc. Discs don't appear in Finder either. It's obviously failing to read the discs and ejecting them within 30 seconds.
Now I've searched for a solution and as a result I've reset the NVRAM to no avail, and also tried using a CD lens cleaner but that seemed to have no effect either, I guess maybe as it got ejected within just 30 seconds as every other disc does.
The next solution I've found online is to delete Finder's preference files. The files I'm supposed to delete are "com.apple.finder.plist" and com.apple.sidebars.plist", however neither of these files appear to exist on my computer.
I remember discovering the fault while my MBP was still in warranty but I rarely use the Super Drive so totally forgot about it and it's now out of warranty
Info:
MacBook Pro, OS X Mavericks (10.9.1)
I have a fairly new iMac that I upgraded to Snow Leopard a few months ago. It seemed to me that prior to that my external HD worked fine with Time Machine. Since then it is recognized for a short period of time when I connect it, then it disappears. I replaced it with a WD My Book. It worked perfectly for a month and now it has shut down. Has anybody had run into this before? I can't believe that every hard drive fails within a month in the same mysterious way!
View 7 Replies View Relatedmy friend of mine has a external Seagate 500gb firewire 400 drive. It is used for storing audio for his production studio and so has critical data on it. I was transfering some programs to him and plugged it into my Late 08 macbook pro. Everything went ok. The power cable came slightly loose which cause the lovely 'you failed to eject disc properly' error. It then would not mount on my macbook or his G5 (single 2ghz). We tried three different cables. Tried to see if Disk Utility would see it, nope. His other firewire drive mounts fine on both machines as does mine. The Seagate drive can be heard spinning up when the power is turned on. Seems to be a dead Firewire interface on the drive enclosure itself as nothing will mount when using the drive to daisy chain. I was thinking of opening the enclosure and installing the drive as a standard sata internal to get at the data. Warranty doesn't matter just the data.
View 1 Replies View Related