I have a fairly new iMac that I upgraded to Snow Leopard a few months ago. It seemed to me that prior to that my external HD worked fine with Time Machine. Since then it is recognized for a short period of time when I connect it, then it disappears. I replaced it with a WD My Book. It worked perfectly for a month and now it has shut down. Has anybody had run into this before? I can't believe that every hard drive fails within a month in the same mysterious way!
I was done doing various tasks on the iMac and when I decided to plug in the external hard drive for a Time Machine backup, the drive spun, but was never shown on the desktop.I also tried another external drive and had the same thing happen.
After rebooting (hey, this sounds like Windows!), the drive again showed up on the desktop and Time Machine worked fine.Is an external hard drive not showing up on the desktop a somewhat common issue?
Is it possible to have an external HDD connected to an iMac or Mac Mini on a regular basis? I have a Power Mac G4, and it's always had issues with going into sleep mode when there is any external storage connected via the USB 2.0 ports (and I've put in replacement ports to try and remedy this, to no avail). The main problem is that once the system wakes up, it thinks you've improperly removed the device. Apple told me, way back, that this was normal and to just eject all external storage before going into sleep mode. Which is a pain, but looking at a new desktop Mac I would like to just get the tiny, base HDD and use a beefy external for all my media - unless this is still an acceptable norm with new macs.
I am a photographer. My Mac Tower and Macbook Pros display my external hard drives on the desktop. That makes workflow so much easier. I just purchased an I-Mac and have to access the external HDs through the menu. how I can display the icons for the external HDs on my desktop?
my friend of mine has a external Seagate 500gb firewire 400 drive. It is used for storing audio for his production studio and so has critical data on it. I was transfering some programs to him and plugged it into my Late 08 macbook pro. Everything went ok. The power cable came slightly loose which cause the lovely 'you failed to eject disc properly' error. It then would not mount on my macbook or his G5 (single 2ghz). We tried three different cables. Tried to see if Disk Utility would see it, nope. His other firewire drive mounts fine on both machines as does mine. The Seagate drive can be heard spinning up when the power is turned on. Seems to be a dead Firewire interface on the drive enclosure itself as nothing will mount when using the drive to daisy chain. I was thinking of opening the enclosure and installing the drive as a standard sata internal to get at the data. Warranty doesn't matter just the data.
I just got a new WD external drive to put some media files on. I went into disk utility just to make sure the external was working fine before I started moving things over and it told me my internal hard drive in my 08 iMac is failing! Good thing I bought the external when I did,
I have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
I currently have a 2TB WD mirror edition that is setup in RAID 1 so it will mirror all my data. Now I also have a bunch of other drives laying around which I also feel the need to back up and currently I am doing this by doing a whole bunch of dragging and dropping and copying and pasting etc etc etc and this is making me very tired. I know that a setup is possible in disk utility but I am not at all sure about how to configure it so I wont lose any of my data.
Some details about my setup: Mac OS X 10.5.6 PowerPc G5 Harddrives: two 1TB WD MyBooks, and two 500gig WD Mybooks --> these pairs need to mirror each other and make my life less of a hassle.
I often use external hard drives to back up my work. Recently I purchased a 1TB Lacie drive. I took a week to build a lovely new file structure for my work. At the end of this week, I began deleting the old files on other hard drives so as to transfer my new neatly structured work back on. In the midst of this, the brand new hard drive crashed, illiciting only the clicking sound of death.
That hard drive, some of my work (a very small amount but still) and a week's worth of sweat and blood was gone in an instant. The person I took it to to look at it mentioned a power surge as being a possible cause for the crash. Anyway, I returned the lacie and bought a 1T Western Digital Mybook (silver). I then began dumping the old back ups onto this.
A week in and this one is crashed too. No clicking sound of death. It calmly sits on my desk with it's unceasing unblinking blue light and refuses to show up in utilities no matter what I do. So I assume it's a goner also. I'll return it also of course. Is something causing these drives to fail...that exists in my walls? Are there power surges causing my drives to die...? OR is it simply a case of bad luck with my choices of new drives?
i'm cloning my mac hd (mac book pro, snow leopard) and though i've made successful clones, the sum of the hard drives (mac hd and external hd) don't match. for instance, my mac hd reads at: 233.71 GB, however the cloned external hd reads at: 216.54 GB. can anyone explain this discrepancy? are there certain things that don't go into the clone that are on the mac hd?
Having chosen a useful large external hard drive I find it says 'Windows only'. Surely, though the software will not work, all I need to do is format the HD and it will work. The machine is: Seagate FreeAgent 500GB External Hard Drive USB2.0 16MB.
I am relatively new to Macs, have been using it for 5-6 months. I already know how to do everything but share folders and drives using my network connection. I have an iMac and a Macbook Pro. I have a 120GB Hard Drive hooked up to the iMac via Firewire. How can I share that Firewire External Hard Drive with my Macbook Pro? What are the steps I have to follow to connect both macs? Is there a way that I could also share my iMac's desktop files with my Macbook Pro? I already have a wi-fi connection between both computers, I just don't know how to share that hard drive between both simultaneously..
I have been using a MBP for a few months now and I am making a total conversion from PC user to Mac user in January when I buy a nice new 24" iMac but to go with it, I want to buy a couple of new external hard drives. I have currently got a Seagate FreeAgent 500GB USB Drive which is Windows Formatted and I will be keeping that to use with my work laptop (a Dell), and I have been really pleased with its reliability. Anyway, I have been looking around and there are some fab drives on the market but I have a couple of questions. If I get an iMac with a 500GB Internal Hard Drive, how big an External hard drive will I need to use Time Machine without having to delete backups all the time?
Also, I have been primarily looking at the new Seagate FreeAgent drives and the do a PC version (USB) and a Mac version (USB/FW400/FW800), but the 640GB USB version costs �76 whereas the 500GB FW version costs �100. Would you go for the bigger size or the added benefits of FW800? Will I notice much speed difference between USB and FW800?
I have an external hard drive that I have been using for my Pcs, and when I hook it up to my mac I cannot write to it (although I can read from it). Is it possible to write to this external hard drive?
I've had a LaCie Porsche Design for the last 6 years with no problems but with the upgrade to a MBP I'm looking to get a new portable hard drive (LaCie or another brand). My old LaCie was FW400 so I'd be looking at FW800 now. Which make and model do you use and are you happy with it's performance?
My external hard drive has been corrupted and the error message is telling me to reformat it. However, through all the research I have done to find out how, everything I've found has told me to use Disk Utility to just erase everything on the disk to do this. When I try to do this, it tells me that I can't erase anything because the disk cannot be unnmounted. What should I do?
I just got a brand new Mac Book Pro. I wanted to get an external harddrive for it. I have a gift card to HP and wanted to buy one from them? Does anyone know if they are compatable? If not, anyone have any suggestions for a HD that is good, but not terribly expensive? I want one that is at least 250 GB.
So I just installed a larger hard drive in my macbook pro. As OSX was installing I decided to read reviews online (bought it in the store when I got the MBP). They're all really bad about using the drive in a MBP - [URL]. I'm installing the application software now and the hd is spining a lot and vibrating the case and making a lot more noise. I've read a few Seagate reviews and they're not much better for that size.
I want to install a huge hard drive because this is going to be my main computer for at least 8 months while I'm working away from home. Normally I have a desktop w/ a huge hard drive so I don't care what's on my laptop. Anyway, based on these reviews and how the drive has been feeling in the case, I think I might re-evaluate putting a larger drive in, and instead go with an external. I can fit all my photos and music on a 250, but I couldn't fit everything I store on my desktop on a 250.
So my first question is, is there a good, reliable 500gb or larger 5400rpm replacement hard drive for the mbp, that a lot of people like? And then the main question: I have a lot of large video files on my Windows box that are over 4gb, which is the FAT32 limit. When I transferred them from my old computer I had to rar them to smaller files and then un-rar them. This is quite annoying. If I'm gonna have an external drive, I'd like one that can be used on both windows and mac and support 4gb+ files..................
Can Mac's be started up from external USB2 drives or is external startup limited to firewire only? I have several machines, IMac (all four flavors) Mac Book and Pro. I want to use Time Machine as the back to all of these devices but I hesitate because of this possible restriction.
What's the best way to mirror two external hard drives connected to two separate computers on a network? Can this be done with the built in file sharing capablities of Lion or do I need to use a utility such as Forklift?
Just bought new version of Final Cut and it will not recognize the external hard drive that I plug into my usb or the extra hard drive that I had installed into my laptop to do video work on for more space.
Has anyone seen anything indicating that there are any new (higher capacity) drives on the horizon in with a 2.5" external FW800 format?
I'm slightly confused why many of the big brands have stopped at 500GB or 640GB drives in their FW800 models. The G-Drive Mini only goes to 500GB, while the WD Passport Studio stops at 640GB. WD do have 2.5" drives at 1TB, and have dine for months, but they're only available in USB2 models.
Any ideas why they all seem to stop short of their highest capacity drives for the faster interfaces? The only ones i can find with 1TB 2.5" drives are the Seagate GoFlex (which i'm not sure about with the swappable interfaces, i've nearly bought one a couple of times but then changed my mind at the last minute), or a couple of companies i've never heard of before who have drives way above the expected price.
Ideally someone will have seen news from WD or G-Tech or someone indicating that new products are on the way. Otherwise, i may end up having to get the GoFlex.
Just updated to 10.6 from 10.4, and one of the first things I notice is that it keeps spinning up my three external harddrives at actions that should not set them in use, like starting an application or opening the trash. It seems pretty random, though I'm suspecting it has something to do with mdworker, quicklookd or both. If anyone knows of a solution that doesn't involve unmounting the harddrives, do tell.
I have two hard drive enclosures: a Macally G-S350SUA, which has Firewire, eSATA, and USB 2.0; and an older Ximeta enclosure which is only USB, which I haven't been using. I have been using the Macally recently but I want to set up a second external hard drive so that I can use the Macally for data. Is it possible to daisy chain two external hard drives through USB, or only through Firewire? The USB plugs on both enclosures are Type B female, so I suppose I'd need a B/B USB cable, which I don't have, so I haven't tried it yet...
This issue has been killing my work flow for quite awhile. I have a G5 dual 2.0. I can barely read or write files to an external hard drive. Say I try and copy 1.56GB of audio (12 files) from my external drive it will start to copy then stop at 500mb for minutes then start moving as normal and stop again around 900 for minutes.. then again at 1.4. This also happens when writing.
Here is the confusing part. This happens with two external drives (different models) with firewire 400, 800 and USB. I have reinstall OSx. I have repaired permissions and ran repair disc on everything. These hard drives work FLAWLESS with my Macbook Pro as well. Gr what can this be? It takes forever to copy data to or from a drive which is often how I transfer audio between my desktop and laptop. I should soon have Mac Pro money and this crappy G5 can go out the window. I am on 10.4..