I just purchased a 13" MacBook Pro. When I attempt to use a TV as an external display, I get a flickering blue screen on my MacBook, and absolutely NOTHING on the television. I am using a Moshi adapter that I purchased from the Apple Store. Despite HOURS on the phone with tech support, I can't get this to work. I know neither the adapter nor the cable are defective. Does anyone have a solution?
I bought a MBA 13" last month and now I'm trying to connect an external monitor through a Mini Display Port-to-HDMI adapter and most of the times the display shows a message "No signal detected"...
I've tried all the possible combinations between the MAC and the Monitor but it would seem a random matter.
Info: MacBook Air (13-inch Mid 2012), Mavericks 10.9.4
I am looking for recommendations on a good Mini Display Port HDMI Adapter for my Macbook Pro 2011 Sandy Bridge. I have gone through about 4 adapters in the past year due to the adapters become unresponsive after 2 or 3 months. I use my Macbook heavily on external monitors for my work (averaging 7 hours or more a day between various monitors).
Info: MacBook Pro, Mac OS X (10.6.7), Preview no longer works.
today i bought the mini display port to HDMI Adapter at the Apple store. The video display is fine but there is no audio. I checked my preferences and there is no option for the TV's speakers. My macbook is from 2009 if this would make a difference.
Despite its description, I hooked it up to my receiver and it does NOT pass audio through. I've been hunting around and all I've found so far is one Youtube video of a guy with an adapter that worked (in the sound section of the system preferences, it shows another option for output that I didn't have), but not what adapter it was.
I have a MacBookPro, model: A 1278 (Mid-2010 13"). Is its mini-display port capable of delivering both video and audio output to a HDMI adapter? or just video output only?
Info: MacBook Pro, Mac OS X (10.6.8), Model No: A1278 (Mid-2010 13")
I have a 13" MBP and just bought a new 23" external monitor connected via mini DVI to HDMI adapter.The monitor is recognized fine, but there is extreme jitter on the screen - basically very annonying and unusable.
imac osx Tiger 10.4.11: I attached Mini-DVI to DVI cable to DVI-D to HDMI cable to Sony Brava HDMIl TV. To use TV as monitor. The only picture is my Desktp/screensaver MINUS the Dock. I tried applications ie. calendar, textEdit; iPhoto, but nothing appears on the TV. What else do I need to do ot use the TV as my computer screen?
I found on eBay a Mini DisplayPort to HDMI adapter. Does this work with the MacBook Pro (Mid-2009 13" model)? If so, will my MBP support our 50" Toshiba DLP HDTV? (720p)
After discovering this new adapter and reading great feedback here on the forums, I picked this adapter from However, I am totally surprised that I have not seen one user feedback on how this adapter does not let your Mac go to sleep. I have tried this adapter on two macs at home, a Macbook Pro and an iMac, all latest models, running 10.6.2. Whenever I try putting it to sleep, the Mac wakes up after about 3 seconds.
I have a 2011 imac 21" and a new 42" LG led tv....I recently purchased a mini displayport to hdmi cable from cablesson and connected them up but I'm getting no response at all from either the tv or the imac.
I'm using an external display with my MacBook Pro, using the DVI/VGA adapter.
My problem is that the display is a little bit blurry. It's not awful, but for example the display of the MBP itself is very crisp and clear so that's what I'm judging it against. Looking at text on the external monitor, some of the letters are reasonably clear, some are a little bit out of focus, and occasionally there is a fairly clear line like on the vertical of a t or an l. I'm sure there is a pattern to this but I couldn't tell you what exactly.
I'm using a Samsung Syncmaster 940NW widescreen display (the cheapest one I could find!) I have the MBP closed and I'm using Bluetooth kbd and mouse.
I've noticed that none of the resolutions available on the external display match the resolutions available on the MBP. The default res of the MBP is 1440 x 900 - I can get close (1344 x 1008, 60 Hz) to this but it seems none of the options on the display is the same as the ones available on the MBP's own display. Is this the reason for the blurriness?
I can still do work even with it looking this way, but I wondered if there's anything I can do to improve it.
I have a Late 2011 MBP, just recently I also go an Xbox and wanted to hook it up to my external display that I have been using for a long time with no issues. I went and bought this: URL....to be able to easily switch between the two inputs. The xbox works fine, however when I view my Macs input the screen flickers a static image very frequently.
I know what you're thinking, it's probably an issue with either a cable, or the device. But when I boot into Windows via Bootcamp with the same exact setup, there is no flicker at all. The display is a dell s2440L, the HDMI adapter is a rocket fish.
Here are the troubleshooting steps I have tried: Resetting PRAM/SMCChanging out HDMI cables on both the Splitter output, and the inputs (I tried 3 different cables on both the inputs, and outputs.)Downgrading OSX to 10.7 (And then went back to 10.9)Lowering the resolution on the monitor (Lower resolutions flicker just as much, if not more.)Resetting the splitter by unplugging the HDMI cord powering it and plugging it back in.and of course, plugging my computer into the splitter input that the Xbox works fine on, as well as taking the xbox one out so the computer is the only input on the splitter.
Like I said, the Xbox works fine, and even the computer works fine in Windows, but whenever I boot into OSX my screen flickers with this static. I should add, the display works fine when not connected to the splitter on OSX.
While watching today apple keynote. At the and i realized that my retina display is totally black. Mirror display through hdmi is ok, apple logo on back side of disply is not lighting.
I have recently bought a 13" Macbook Pro and wanted to hook up an external display (an oldish acer 19"). I have a Mini Displayport to DVI adapter hooked up to a DVI -VGA adapter which leads to the display. I haven't got it to work yet. I have followed advice about closing the lid and using usb mouse and keyboard with no luck. The only thing that happens is that the screen on the laptop flashes blue for about a second after plugging in the Mini DisplayPort adapter.
if i buy the mini display port to dvi adapter, could i use it with a dvi to hdmi cable for my monitor. This is because the dvi and vga ports are already taken up.
I have a macbook pro from fall of 2007. So far it has worked perfectly and I've used it with an LG full hd LCD for about 1,5 years. I use a regular DVI - HDMI cable.About a month back it suddenly stopped working. The TV just tells me "No signal".I didn't change any settings or anything. The computer still recognizes when something is plugged in as the screen flicks blue and the displays icon in the menu bar lists the TV with correct model and resolution. And if I have spaces turned on it changes from 4 to 8 "screens".
I have tried everything from rebooting the computer to resetting P-RAM. I got a new cable, no difference. However when I tried the TV with my friends MBP, it worked. So the problem is definetly in my computer, not in the TV or cable.My OS X is Version 10.5.8 Leopard.
I bought an iMac a couple of years ago and liked it so much I bought a Macbook Pro a week or so ago. I downloaded a tv series from iTunes last night and took the adapter from the iMac and hooked up the Macbook to the tv to watch the show> Well the show plays on the laptop monitor, but the only thing that shows up on the tv is the wallpaper that comes installed on the Macbook (the galaxy thing).
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
I am trying to connect my Mac Book Pro to HD tv with a HDMI cable. I bought the cable at the apple store. When I plug it in and I turn tv to HDMI, the screen on my laptop turns blue for a few seconds and then returns to home screen. How do I get my computer to show up on my tv?
I've just purchased a Mini Display Port to HDMI Adaptor, The picture is great, quality is super, however I can only here sound through my Macbook pro. I know my MBP supports sound through HDMI, I've checked System Information and under Audio built in, there is HDMI Display port output. I don't know how to tell MBP to play sound through HDMI.
Info: MacBook Pro, Mac OS X (10.7.4), Magic Mouse, and airport express
I've been searching high and low and cannot find a MDP-to-HDMI cable (not adapter) that supports audio out for use with my MBP. Does such a cable exist, or do I absolutely need to use an adapter? Looking for the cleanest solution possible. Looks like I found a cable on eBay. They do exist from individual cable-makers, but it looks like they don't exist from cable manf's like Monoprice and Blue Jeans Cable.
I just tried using my Monoprice mini displayport to HDMI adapter with my 2010 MBP connected to my TV. Audio did not work.So I'm wondering if I'm missing a setup step on my MBP or if maybe the monoprice adapter is out of date (according to Apple only adapters with VESA 1.1 or higher are compatible w/ the 2010 MBPs audio out feature and I bought the adapter a year ago).
I've got a recent MBP with Thunderbolt. I'm trying to connect it via a Mini DisplayPort-to-HDMI adapter to an HDTV with HDMI, but the MBP doesn't seem to acknowledge the addition of the new display. What it IS doing is flickering the built-in screen occasionally, the way it does when connecting to a projector or something, but it never shows any additional displays in the displays CP, and never seems to send any signal out to the HDTV.
Mac: MBP 2.3 GHz i7 with OS 10.7.4 Adapter: Belkin Mini DisplayPort to HDMI TV: Sony 32" Bravia
So i bought a mini display port to hdmi converter and im running an hdmi to RCA cable from to my tv. I dont really know how to set it up to put out the video. I went into displays and clicked detect displays and nothing showed up and theres nothing but a blue screen on my tv.
When it did show the screen saver the mouse arrow was on the tv and not on the computer and there were no icons to be found on the tv to click on. Right clicking would only bring up the screen for setting the background pictures.