its vivid image I like the screen bright on my 15" 2010 macbookpro. but I wonder, in the long run does it shorten the computer's lifespan?
should I stay 3 clicks away from the maximum setting for example? just curious what the consensus is on this, if there is one
Info:
MacBook Pro, Mac OS X (10.6.7)
I just got a new MBP and I want to test how much battery life I am getting. Is there a way to do this other than just manually keeping track of how much time I used it for? A program or something that tracks it for me?
View 1 Replies View RelatedI recently bought a Macbook Air and needed some tips to keep it's battery healthy. Now I know that the battery has limited cycles before it goes down to less than 80% charge capacity. But if I keep my adapted connected as much time as possible, to reduce the number of those cycle counts, will it harm it battery? What is best way to keep the battery running healthy for long time - charging it once a day or using it with adapted connected most of the times?�
Info:
MacBook Air (13-inch, Mid 2012), Mac OS X (10.7.4)
Excluding sitting outside in the sun or in very dark rooms, what level do you usually keep your MBA brightness level at and what kind of battery life do you get? I've got mine set to about 65%, haven't used it enough to know what kind of life I get.
View 6 Replies View RelatedThe brightness goes up when you plug in your MBA, but then over time it just goes up and up. I honestly like my brightness pretty low (rarely more than half, typically at 3-5 notches), but it just keeps on going up and up. I almost never set it above half, but multiple times a day, I notice that it looks pretty high and it's at like 3/4 so I put it it down to about 1/3, but after a while, it's just up again.
Anyone else notice this? What is it, why does it do this? How can I fix it? I don't mind not having auto-brightness (even though I loved it), as long as my screen doesn't keep going up.
So I installed Vista 64 bit on my Macbook Pro (Santa Rosa), I installed most of the drivers I can find, but I cant get the screen brightness buttons to work (F1 and F2)
View 2 Replies View Relateddoes keeping a high brightness level all the time effect performance or display?
Info:
iMac, Mac OS X (10.4.1), 27"/4GB/2.7GHz/intel core i5
I have dual ACD's. How do I make it so that both screens have the same brightness? If I adjust the brightness in the display settings it adjusts the main screen, but then not the other one. How do I make them the same?
I have the 21" iMac and need to brighten the screen. How do I do this?
View 2 Replies View RelatedHas anyone noticed a very slight flicker on their new MBPs? I have a new 13" and, every so often, the screen brightness dims and then brightens very quickly (happens in less than a second).The option for auto-adjusting the screen brightness is off so it's not that particular function.It's most noticeable on all-white backgrounds both on AC and battery power. Hard drive access doesn't seem to coincide with the dimming.
View 17 Replies View Relatedlately, my mba has been behaving a little weirdly. its screen would suddenly become a little dimmer when the brightness in the room has not changed a bit. after a long while(15 min?), it'll turn brighter again by itself, and again without any change in the lighting of the room. the change is not big but obviously. any idea? can it be some software? or setting? or a defective light sensor?
View 2 Replies View RelatedWhat's the best way of wiping dust off a glossy screen, and generally keeping it clean? I'm hesitant to use just a soft cotton cloth in case it creates static, thus attracting even more dust.
View 7 Replies View RelatedI noticed the fans are right next to the hinge on the aluminum macbooks and it looks like the airflow is blocked if its shut. Right now i have a monitor hooked up, is it fine leaving my screen shut while using another keyboard without warping my screen or overheating my computer?
View 7 Replies View RelatedI just got a new 15" MBP and it keeps changing the screen brightness by a couple notches either way on it's own. Anyone have/heard of this problem?
View 11 Replies View RelatedMy MacBook's screen is pretty dim, even at full brightness. The iPod Touch far outshines it and even a Sony PSP is brighter.
View 24 Replies View RelatedRecently, after about 5 minutes of use (not sitting idle), my MacBook's screen will go very dim. I hit the buttons on the keyboard to take the brightness all the way up, but it doesn't get much brighter and there's only one thing that I can do to make the screen go brighter: I go into System Preferences and click Display. The second I click that, the brightness returns without me doing anything in the Display section, so after Display comes up, I just close it out and the screen brightness is fine for a while. It seems to do this after the lid has been closed for a while and then starts dimming again after opening the lid and using it for about 5 minutes. Is there a way to fix the auto-dim mode without disabling it? MacBook (white) is running Leopard 10.5.8 with all the latest updates.
View 2 Replies View RelatedI dropped my laptop on a tile floor and the bottom hit it flat. my computer works fine besides the fact that my computer screen's brightness is as if my brightness level was all the way down.
View 4 Replies View RelatedI find it you have to or it will be too dark.
View 24 Replies View RelatedI wanted to check out Windows 8 so i decided to install it using Bootcamp on my Macbook Pro. I installed it successfuly, along with the Windows Bootcamp drivers, but my Display is VERY dim, the brightness is all the way up to the Mac. I rebooted the Macbook Pro and ran OSX and the brightness is fine, but on windows is very very dim and idk how to fix it.
Info:
MacBook Pro, Mac OS X (10.7.4)
When I push the brightness key on the keyboard, the appropriate image comes up on screen and goes to full brightness, but the actual brightness of the screen doesn't change and the lack of change is reflected correctly on the brightness slider in System Preferences.
View 2 Replies View RelatedI have a first generation macbook pro and it appears as though the screen is not as bright as it once was.
View 5 Replies View RelatedI am just wondering if there is a way to have a brightness preset for when the macbook is plugged into the wall and running on battery?Eg. When plugged in I want 100% prightness, but when running off battery it automatically lowers the brightness.Right now I manually lower it and some times forget.. especially times when I need that extra bit of battery power
View 1 Replies View RelatedI have the aluminum MacBook (<3) and it is often found on my desk, in front of my aluminum desk lamp. I was writing a paper and had one hand on my touchpad and touched my (off, but plugged in) light with my other hand. My screen dimmed just a little bit, approx the brightness between the two highest lighting levels. Even when not touching my touchpad, just touching my light, my screen did the same thing. Depending on WHERE on the lamp I touch, it affects the brightness... but only on the bell surrounding the light bulb, no other components of the light.
View 8 Replies View RelatedI don't know if anyone posted this issue before. I can not control screen Brightness on my MBP 13'. I tried my F1 and F2 key and the Nvidia Control Panel, either of them is working. I installed all the drivers from the CD and it can actually show the icon in the center(bottom) of the screen when I hit the F1 or F2 Key. However, the brightness adjust does not work,the screen stay the same.
View 11 Replies View RelatedJust bought a brand new 15" MBP, and immediately after unboxing the screen brightness seems to just move/adjust without adjusting via brightness buttons.
View 5 Replies View RelatedI have a macbook and a screen plugget to it. Now I use just the new screen and don't use the macbook one. But every time I turn the mac on the macbook screen turns on, and I have to decrease the brightness manually every time. (cause it's a waste of energy to keep it on if I don't use it). So I'd like to know to set the screen brightness to 0 by default, so I don't have to turn the brightness down every time.
View 4 Replies View Related(Electricity as in AC power.) I've been using the brightness controls (F keys) to turn off the screen at night and leave my computer running. I just assumed it uses less AC power that way and I'm saving some electricity but I don't know a lot about electricals to confirm my theory. Does anyone know?
View 11 Replies View RelatedI've been wearing contacts all my life in order to get 20/20 vision. And until last week I always had to have my brightness on the highest setting while I was at the office with fairly bright overhead lighting. While using the computer at home with the lights off/dim, I still had to have the brightness set to 4 bars shy of the brightest setting in order to see everything properly. And I never understood when I would see people on here saying they had their brightness set to the lowest settings and it was plenty bright for them to see. Last friday I had LASIK done.
And since the surgery I now have 20/15 vision in both eyes, which was expected. But one thing I did not expect was the difference in brightness. Now in the same office setting I have the brightness set to 40-50% brightness and it's still almost to bright. And at home I set the brightness level to 1 bar and it's more than enough to see every detail on the screen. In fact, I now wish there was a lower brightness setting than the lowest bar. The best part is that, while running on battery, I can now get another 30-40 minutes out of usage with the brightness set so much lower. Now if I could just figure out how to get my volume to not jump to 70% when I plug my headphones in I would be very pleased.
So today my screen has been acting up on me, it keeps lowering and raising the brightness all on its own. The brightness indicator that pops up when you push the buttons does not show up, the screen just gets brighter or dimmer for a few (10-30 seconds) then goes back to where I have it set at. My battery level is at 64% and it is not plugged in.
View 5 Replies View RelatedI downloaded the latest software update for Leopard. I've noticed that when I wake my MBP from sleep, the brightness of the screen is very low. I have to click on "F2" to increase the brightness of my screen.
View 1 Replies View Related
