I've been running Fusion for quite a while and have a VMDK (XP) that is fully configured and running all the tools I need. My question is - is there a way to convert the VMDK over to a Boot Camp partition? I'm trying to avoid reinstalling all the tools I have on the VMDK.
View 7 RepliesI have a 250GB firewire drive. I have a G5 iMac and an Intel iMac. I'd like to make bootable clones (about 60GB each) of each for off site backup, so two logical partitions. As far as I can see, the partition table scheme is determined at the physical drive level. But I need the logical drives to be Apple for the G5 partition and GUID for the Intel partition (please correct me if I am wrong) in order for them to be bootable. Is there any way around this, or do I need two physical drives after all?
View 2 Replies View RelatedI converted a 500G External USB SATA hard drive from MBR to GPT no problem. It could be done using either Vista 32bit or WinXP 64bit the conversion under XP Pro SP3 32bit was not possible maybe because diskpart was still an older version and not updated to a newer version. My work on the Mac is done now and I want to convert my drive back to MBR so I can use it with windows. I've erased and then deleted all the partitions I had created on the drive. Using WinXP 32bit and Disk Management I see only one big partition (465.76 GB Healthy (GPT Protective Partition)) Using WinXP 64bit and Disk Management I can see there is a 200Mb EFI Systems Partition followed by 464.44 Gb of Unallocated space. How do I get rid of this EFI Systems Partition that is stopping me when using diskpart to convert to MBR?
My sister bought a second hand Mac Book Pro. According to Mac Book Pro specs. this unit should have had a 250G - 320G Hard Drive but someone had replaced with a 120G before she got her hands on it. My assumption then is that theywhoever it was that switched the drive must have also replaced the DVD drive at the same time as well........................
I'm a bit unsure as to the best way to tackle this. I have a single partition on my Leopard install with that partition map scheme being a "Master Boot Record" as apposed to a GUID Partition Table (GPT). Not sure why it is not a GPT but I appear to have formatted it incorrectly when I installed it (as a replacement drive / upgrade of the original). In any case, I now need to change this partition system back to a GPT so that it will allow me to run firmware updates as EFI upgrades are dependent on a GPT partition.
My question is more or less what is the best way to accomplish this given it's going to require a reformatting of all my data in any case. I have it all backed up to a Time Machine backup on a Time Capsule but to reformat the drive would then mean I have to re-install the Tiger install, followed by the Leopard upgrade disks, followed finally by the restore from Time Machine.
Is there an easier way to clone the data perhaps, such as with a Carbon Copy Cloner disk to disk clone? Or would that "restore" then merely include the actual partition format back to Master Boot Record as part of the clone? (I suspect the clone includes the partition type). Any advice would be greatly appreciated! Are there any other options?
I'm planning to upgrade my 17" MPB soon (trying to hold on for Arrandale, but we'll see how the old one holds up). Not that it will make much difference in my decision, but does anyone know if the 8GB RAM limit in the current MBPs is due to the fact that the largest currently-available DIMMs that will fit in the MBP are 4GB each; or if it's due to a limitation in the way the computer/chipset addresses the memory? In other words, once someone develops an 8GB DIMM that will fit in the MBP's slots, will it be possible to upgrade to 12 or 16GB of RAM?
View 6 Replies View RelatedI have a 13-inch Macbook pro (Mid 2012) with 4GB memory. I was browsing around and discovered a table in the activity monitor stating the following;
- Physical Memory: 4.00GB
- Memory Used: 3.75GB
- Virtual Memory: 4.51GB
- Swap Use: 35.3 MB
From reading other questions and the responses to them I have realized that Maverick takes up a lot of memory but I'm not quite sure why my swap used isn't zero. I don't have much on this Macbook and have bought it recently. Why is the Swap use not zero? Is it a bad thing that it's 35.3MB?
The reason I was looking around was to figure out if my Macbook would be good to run downloaded games and such on; this is a shared laptop and that's what my brothers are interested in doing for the most part. Yes, we have a huge age gap.
Not being a professional mac user I was asked to provide my physical mac address by the IT person at my work to enable me to get wifi. I can't seem to be able to do this on my G4 15" powerbook. I'm also not sure if I need to as I get full signal from the wifi in the place and I should only need the password? He says this is the only way he can give me the password..is he a bit behind the mac times!? I remember a 'run' command on the early iMacs.
This is what I was given;
'On the laptop press start, go to RUN, type in CMD, then type in IPCONFIG /all (there is a space between ipconfig and the / ) He should then see his physical address.'
Can anyone enlighten me please?
About 3 days ago I noticed that right clicking on items was becoming increasingly difficult to do. The system would only register about 75% of my right clicks. Later that day the left click stopped working almost entirely. When I go to drag items, I either get no response or the pointer will grab the item briefly and then let it go after moving a very short distance. It does seem to work when I put a significant amount of pressure on the trackpad when clicking but I've seen some horror threads about trackpads cracking so I'm attempting to avoid applying too much pressure.
View 8 Replies View RelatedI have a mbp purchased in late september and over the last few days the actual physical click on the trackpad is not working. If I apply a lot of pressure it will work but im afraid ill further damage the trackpad if i keep doing this. Anyone else have this problem and how did you solve it?
View 1 Replies View RelatedDoes the Macbook Pro and the Mac Mini use the same type/size hard drive? (Looking to take a hard drive from a macbook pro and put it in the mac mini as a replacement)
View 2 Replies View RelatedI was playing a trackpad button intensive game and everything was fine. I shut down my game, closed the computer, and went to bed.
The next day, I opened my MBA and the physical trackpad button doesn't seem to work properly. If I push it down, I feel the button engage, but unless I'm touching it in the lefthand corner, there is no response on the screen. I've enabled touch-to-click and I can still get the left side to work, but this is really annoying.
I can't see any warping in the surface of the trackpad and I don't own a Bluetooth mouse.
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
I bought Fusion and ran Windows 7 in a VM - within a few minutes my MBP (17" i7 4GB RAM) was wayyyyy hot (left side bottom/top). I mean, I am a little concerned with how hot it gets. I'll look into smcFancontrol but want to know if upgrading to 8GB RAM will do the trick as well?
View 12 Replies View RelatedThe physical trackpad click with my mid 2011 mbp doesn't work....and I think it can't be a software problem because it doesn't work on windows ether
2,2 GHz Intel Core i7
8 GB 1333 MHz DDR3
SAMSUNG SSD 830 Series 128 GB
Corsair CSSD-F120GB2
with OS X Lion 10.7.4
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
If so how, I'd like my keyboard to be factory made with two languages?I don't want stickers, I want something legit.
Info:
MacBook Pro with Retina display
So I bought my unibody macbook the first weekend they came out.
It's been great till this point, however over the past month, the click stopped working.
it started off acting strange, then got to the point where only certain parts of the button would actually click, and now it doesn't register at all.
Camino is my favorite browser, but its one big problem is that is uses up way too much of my memory. Is there any way to make it use more virtual memory and less physical - i.e., a memory quota? What would be the repercussions of doing this be?
View 2 Replies View RelatedI'm curious as to how thick the iMac G5's are. From what I've found, they are 6.8" thick, but I find that hard to believe... Is that figure for the stand and all? What's the actually thickness of just the white part?
View 3 Replies View RelatedIn OSX (Leopard), is there a way to allow the actual physical eject button on my external DVD drive to actually eject the disk? Obviously it is not a hardware limitation, seeing as I can do this just fine in Vista...
So is there a terminal command, a .plist to edit, or even some 3rd party plug-in that will allow this to happen? It is really frustrating when OSX is locking up due to a bad DVD or something, or if I am in a hurry and need the damn drive to spit out the disk PRONTO..
I have powerbook g4 with 2GB Kingston memory. So far I haven't experienced any hardware issues. However today I've noticed that all of a sudden 1GB has disappeared!! My Mac recognizes only 1GB! What might have happened?
View 3 Replies View RelatedI've studied the forums & there's lots of discussion about having to install SL, then download Lion (again) then other thread says to copy the downloaded Lion (in the Apps folder) to an 8gb thumb drive, etc, etc. I'm installing a new 512GB SSD in bay-4 so that's where I'd like to move Lion. Is RE-INSTALL really necessary to simply move it to another drive?
View 10 Replies View RelatedSo I would like to know if there is an actual physical folder housing all my iPhoto Library pics or is it literally just in the application? And is there a way to make it so I have them in a folder but iPhoto can still access them without putting two copies of every pic on my computer?
View 24 Replies View RelatedI just read a thread on Undercover and it reminded me of a question I wanted to ask earlier this week.
I'm going to college in september and it seems as if a Kingston lock is not a good choice. There are a number of things on youtube including yanking the notebook, pulling on the lock itself and using cardboard to open the lock. This makes physical locks look bad. Would software be a good alternative? How about lojack for laptops? Apparently they'll get your laptop back regardless of where it ended up. If not, they'll give you a grand. Seems like it would be hard to do if it was chopped up like when a thief brings a car to a chop shop.
[URL]
Consider this my first ill informed, new to Mac OS question. Just received my new iMac today and while poking around it seems I do not already have iLife '11 installed, but a previous version of the suite. How do I go about updating? Should it be included? Do I have to actually wait to get a physical disc?
View 2 Replies View Related(First of all for the people who will not read the thread, but just post away) I DO NOT MEAN LIKE THE iPad, BUT USING GESTURES ON A PHYSICAL KEYBOARD Okay, would you buy a keyboard where the keys are coated in the Apple Trackpads' glass and have touch sensors built-in. It would allow you to do things like swipe three fingers in the same row to start a new paragraph and automatically indent, Finger swipe up for select all, some undo commands, and a lot of other typing related gestures.
View 2 Replies View RelatedHave a macbook pr 17 with bootcamp.
the osx 10.6 partition is giving errors (the black and white multi language message that tells you to hold down the power button..)
have done a permissions repair, run techtool from a boot disc, all have failed to repair.
next step is for me to reintall snow leopard, and as i have no dual layer disks or usb keys i intend to install from external usb drive using the instructions here:
http://osxdaily.com/2009/09/02/insta...t-a-dvd-drive/
But how do i format the drive from within windows as boot recognisable from mac?
i have partition magic and cannot see ny option for osx extended or �GUID Partition Table?
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
View 5 Replies View RelatedI recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
