MacBook Pro :: Connecting External Hard Drive Via Adapter?
Aug 11, 2010
I just upgraded to a new MacBook Pro as some of you saw in a recent post. My external hard drive is connected to a 400 firewire port but the new mbp's have 800 firewire ports. I have an adapter but for some reason the external doesn't show up. It works on my old macbook but not on this new one, doesn't even show up in the disk utilities. Do the fire wire ports have to match up in speed? Can my backup and the files be saved?
I have a Mid 2010 15" Macbook Pro, and I want to connect an external hard drive over eSATA. My model of MBP does not have an ExpressCard/34 slot, but instead an SD card reader slot. Is there an adapter that works that would allow me to connect an external hard drive over eSATA?
I have a MacBook pro. I want to store media on an external hard drive. Can I connect my G Drive external hard drive to my existing home network? I have AT&T internet provider, and their modem (residential gateway) only has ethernet ports.Â
I've had my hard drive re partitioned today and all my data was dragged onto an external hard drive. connect the drive & use migration assistant to transfer everything. I understand I could drag and drop files but I want everything to be done properly through migration assistant but it won't pick up the external drive , however it's files are accessible through finder. Migration assistant just constantly gives me the message, 'looking for computer'. Â
I'm looking for a way to connect an external bus-powered Firewire 800 hard drive (Glyph Portagig 800) to an iMac which only has Firewire 400 ports, and still powering the drive through just the Firewire connector.
All I've found are Firewire 400 to 800 adapters, allowing Firewire 400 peripherals to be connected to computers having only Firewire 800 ports. I need the opposite of course. Where can I get such adapters, and without sacrificing bus-power?
I am using IMac late 2011 model core i5 4gb ram. I recently bought seagate freeagent goflex desk 2tb version and I am using it as time machine. but when it is connected system is freezing frequently and some times I am getting kernel panic error but after disconnecting it IMac runs smoothly I used my system with out connecting for few days and there is no problem at all but when i am connecting and using it all this happens again. Another thing i am also using freeagent goflex portable drive for last one year and I did not experienced such problems at all.
So I just bought a SimpleTech Simple Drive 60gb to use on my MacBook with Mac OS X 10.4.11. I followed the instructions and plugged the Mini-B part of the USB cable in the hard drive and the other end of the USB plug in my MacBook. The instructions tell me I am supposed to see the drive pop up on my desktop but I see absolutely nothing.
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
I'm trying to watch some movies with my family and I'm having problems.
I'm not getting any signal from my tv. I think the item is fine since my macbook's resolution changes to 800X600 I tried to change it to 640X480 (I think) the lowest possible resolution and it doesn't work, Nothing happens to the tv only in my macbook.
I was able to manuveur a new sata cable under the fan assembly and connect it the mac pro ON Board Sata connector. Im close to installing a new Hitachi 1tb drive in the optical bay, using the molex power connector there, and my new sata dongle connector. Question: Where do I get that adapter for 5.25" to 3.5" for the hard drive to mount in the optical bay? Ive been googling for 1 hour and I found 1. Noiseblocker NB X-Swing $25 -- Hard to find anywhere in USA to buy it. 2. TransItnernational Pro Caddy -- $39 -- and No noise dampening.. just big cage. 3. The metal rails that come with many ex hard drives. 5.25" to 3.5" standard brackets. $9. looks like this causes the most noise problems. Can you guys recommend which one/where to get my last ingredient for the 5th drive install in the mac pro optical bay.
i need to find out how to get my hands on the correct adapter to connect my macbook pro to my old G4 20 inch cinema display. i know there is an expensive powered unit, that is an adc to dvi adapter, but there is also just a regular dvi to adc adapter, and im not sure which one i need? or how to get my hands on one that doesnt cost over $200 (the powered one, if thats what i need)
pretty new to the Mac side of things. I got my MBP about 3 weeks ago I think. I got a mini display to hdmi adapter (off ebay, so this may be the problem). I hooked it up to my laptop and tv and it took me a while to find the mirroring box but I got that working so what's on my computer pops up on the tv. I go to play a tv show, and the sound is just on my computer. I went under system pref and sound but only "internal speakers" is available for the output. Am I doing something wrong? Or do I just have a cheap adapter?
I am trying to connect some logitech x-540 speakers to my i7 15" MacBook Pro and get the full surround sound not stereo. What adapters would I need? If possible please add links for the adapters?
I just ordered a new Macbook pro. I'm going to have a HDTV in my room at school and I want to be able to connect my laptop to it. So I could buy apple's mini displayport to hdmi adapter and then buy a hdmi cable, but that would probably end up costing me like $60. I'm wondering if anyone knows if something like this would work? It seems like it would work but its from hong kong so I donno lol. Anyway, anyone know any cheaper alternative to the over priced apple adapter? Also, I understand that the new macbooks have audio output through the minidisplay port so the adapter has to support audio too.
I have a MBP for 27 months and something wrong with the power source recently. As my MBP is bought for working purpose as a desktop so mostly i kept my MBP connected with the AC adapter. I will let it run on battery once every month or two so as to keep my battery runs. However a couple of days ago I found the my MBP is running with the battery power instead of AC suddenly, then I let it run till 1X% and recharge my battery again.This situation keep happening recently and I needed to keep recharge my battery all the time, and what even worse is the adapter stopped charging in the middle of charging period for two times. It couldn't complete the whole charging cycle and I needed to disconnect the adapter from the socket for a minute and continue charging again.While the battery is charged, i let my MBP runs with the adapter in on as usual, however the green light will go off suddenly while the battery is still in 100% or so, I have to disconnect the adapter from the socket and plugged in again.
As I now always need to keep an eye on the battery icon and coconutBattery and I found that the percentage of the battery won't drop off before the light goes off. Is my MBP got infected or anything will lead to such case? I am just wondering if the recent software updates lead to such case as the it happened coincidentally.
Info: MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
Bought the new iMac. I have one La Cie 1-TB external HD from previous Mac that I want to hook up to this new one, plus I want to daisy chain a La Cie 160g HD to that one. What driver do I need, and how do I hook them all up?
recently - perhaps after upgrading to 10.9.3 - I am experiencing kernel panics on my 15" MacBook Pro 2,3 GHz Intel Core i7 whenever I connect my external Western Digital My Book Essential hard drive. I have upgraded its firmware to the latest version I could find, v. 1025 - and thought this had fixed it, but it hasn't...
Info: MacBook Pro (15-inch Mid 2012), Mac OS X (10.5.5)
I've got a recent MBP with Thunderbolt. I'm trying to connect it via a Mini DisplayPort-to-HDMI adapter to an HDTV with HDMI, but the MBP doesn't seem to acknowledge the addition of the new display. What it IS doing is flickering the built-in screen occasionally, the way it does when connecting to a projector or something, but it never shows any additional displays in the displays CP, and never seems to send any signal out to the HDTV.Â
Mac: MBP 2.3 GHz i7 with OS 10.7.4 Adapter: Belkin Mini DisplayPort to HDMI TV: Sony 32" BraviaÂ
I have a Powerbook G4. It doesn't have an internal wireless card so I bought a Linksys wireless adapter to plug into the side of my computer when I first got the computer. It worked fine for years. I recently reformatted the hard drive and now when I insert the wireless adapter it no longer will allow me to connect to the internet. I'm aware that Linksys doesn't have drivers for Mac users so I'm confused as to how I got it to work in the first place. I don't remember installing any third party software, but I may have, it was a few years ago. Does anyone have any suggestions what I should do to allow me to use my linksys card in my Mac? I've heard of Orangeware but I'm not sure if that's the solution. The adapter is a WPC54G
Oh one last thing, when I plug the card in, an icon appears in the top right corner that shows something is plugged into the port but doesn't allow me to click on it and search for wireless connections.
In a month or so I'm going to need to do a Keynote presentation with a projector. I have the new MacBook, so I need the Mini DisplayPort to VGA Adapter. It doesn't seem to be getting good reviews though (many saying it doesn't work for them). I will not be able to test it out with the project until the day of the presentation. Is there any other way to connect the MacBook to what I assume will be a basic projector?
When i connect my hdtv to my mbp via vga (using mini displayport vga adapter) I am only achieving a 1080i signal. I did some research and I found that there are two 1080 resolution options in leopard, one being 1080i and the other being 1080p, you simply have to turn the display options on in the menu bar and then select the one you wish to use.
With this new found knowledge i found the two resolution options and tried them however, I found that one of the 1080 resolution options outputted 1080i whilst the other outputted 1050, despite clearly saying 1080. This has me baffled! Is this due to me using a vga cable and has anyone had similar issues? Additionally, is it possible to achieve a 1080p signal from a mbp? Mine is the late 08 model if that makes a difference.
I have a MacBook Pro 2012 (Lion) and am connecting to my monitor via the mini displayport and a VGA adapter. This worked fine for a while, but now is intermittent. It's not the cable or the monitor as I have tried with several and get same results. The port works fine with an Apple monitor and no adapter. I've seen several threads on this, but no solutions other than starting up with monitor plugged in which I've done.I updated the OS and it worked fine yesterday, but today not working again.
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
I'm thinking of getting the new MacBook which only has USB ports. I have a Firewire/USB hard drive that I'll connect via USB. Can I connect another HD that's firewire only to that drive?
So around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then. I want to be able to connect this WD-160JB drive as a external hard drive to my mac.Â
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.Â
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
My Airport Extreme network is working fine. The problem is that I'm sharing a hard drive which works fine with the Macs but my obligatory Windows XP computer won't see the hard drive. I have it connected to the network wirelessly and it shows as connected in XP Network places but how do I get it to see the hard drive which I have connected directly to the Airport Extreme Base Station?
I'm considering buying an Airport Extreme to extend my home network and to connect to my Home Theater System - Has anyone tried connecting a hard drive to their Airport Express (its seems that the USB connection is designed for Printing, but will it run a Hard Drive?)... Or should I rather look at getting a multimedia player that has WiFi connectivity to connect to my home network?
