MacBook Pro :: Configuring Dual Display In Advance
May 1, 2012
When I give presentations, I like to bring my own MacBook Pro so I can get right on it with all my preconfiguration. However I am staggered by the hassle of getting the dual display setting right. Usually when I plug the MacBook Pro into the projector it will give me an unpredictable display setting, and I will usually have to spend some five minutes to configure it correctly before I can launch into the presentation.
In situations when I am only allotted something like ten minutes this eats up my precious time in a big way. A valid solution is to rehearse with the projector and refrain from plugging anything into the computer between then and the presentation, but often times I have no control over what projector I will be using until the last minute.
My question is, then, is there any way I can preconfigure the display setting (two independent displays, with the desktop set to my monitor's native resolution, the VGA to 1024*768, with the laptop monitor being the primary display) that I can plug in the projector and begin immediately?
Info:
MacBook Pro, Mac OS X (10.6.8), Late 2008
View 6 Replies
ADVERTISEMENT
May 24, 2010
It will not allow me to advance beyond the desktop, it will not respond to repeated restarts. Everything is functional but I cannot access anything after reaching the desktop. 10.6.2.snowleopard etc. I cannot get it to respond after reaching the desktop, none of the topbar functions respond at all to anything. Is there any keyboard command I can try? This is being typed on an old pc I had laying around...
View 6 Replies
View Related
Oct 26, 2008
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
View 2 Replies
View Related
Oct 13, 2010
I have been running my macbook pro open, with a single monitor running beside it. I have come to the conclusion that I would benefit from two large monitors while working at home.
I know I need to buy the dualhead2go DP edition, but what Im not sure about is the cables I need to hook up to my monitors. I haven't yet decided what two monitors I am going to hook up to it, although they will be exactly the same and have HDMI connections.
What I am planning on doing is Getting the Dual Head 2 go, along with 2 DisplayPort to HDMI converters, and 2 HDMI cables, Correct me if Im wrong, but this should work?
Also, If anyone is currently using a dual head to go, how is the performance? I wont be doing any gaming, so that is not an issue, but for day to day tasks I assume everything will run fine? Im running the 330 in my 15' MBP.
View 2 Replies
View Related
Feb 25, 2009
I'm thinking of hooking up a second monitor along with my Macbook for home use, probably just an older CRT. What kind of adapters do I need to do this?
View 3 Replies
View Related
Sep 14, 2009
I have a 2008 iMac with intel processors and a Macbook Air for when I travel.
I want to set the Macbook Air up as a second monitor while I am at home using my iMac. How do I do this?
View 2 Replies
View Related
Jul 4, 2012
I've been having a nightmare getting WIndows 7 to work properly with the second display on my MBP 15" (Early 2011) i7.
I'm currently running Lion 10.7.4 which works fine on both the internal laptop panel and the external AOC monitor through a Thunderbolt -> VGA Apple Adapter.
Bootcamp installed Windows 7-x64 with no issues, but when it came to trying to get the second monitor fired up it wouldnt.
I noticed when I installed WIndows and when I boot into it, that the screens mirror one another, I take it this is the Intel GPU running. I'll explain why in a bit.
1) I updated all the bootcamp files through Apple Update, no change
2) WHen I extend the displays, Windows sees the display, make and model without any issues, but it gets no signal
3) I then manually removed the ATI Radeon HD6xxx drivers manually, rebooted and both displays mirrored again throught a 'standard VGA adapter', this is why I assume this is the Intel kicking in.
4) I downloaded the latest ATI Drivers... ATI Mac Drivers -> Bootcamp -> Macbook Pro
5) Rebooted, and still stuck at step one now...
Info:
Mac OS X (10.7.4)
View 1 Replies
View Related
May 16, 2012
Just received new iMac. Turned computer on, selected language, on next page it won't let me select country of origin to advance through the set up.
Info:
iMac
View 1 Replies
View Related
Jul 21, 2009
I have a Samsung 2033SW hooked up to my mac and whenever I play video full-screen on on screen (either the laptop or the samsung), the other screen blacks out. This happens whether I use VLC, RealPlayer or Quicktime. How do I set it up so that I can play full-screen video on one and still be able to use the other screen for other stuff?
I'm pretty sure it's not because there aren't enough resources because I can still play "fit-to-screen" on one screen and still have access to the other screen.
View 1 Replies
View Related
Oct 2, 2010
I might be purchasing a 30 inch cinema display and currently have a mid-2009 unibody MBP. I know I need the cable to power it, but do I need to drop the 100 dollars for the apple one or are their any alternatives?
View 4 Replies
View Related
Jan 25, 2010
I purchased the apple mini display port to dual-link dvi adaptor and a dual-link dvi cable. The 2690 display now "lights up" but I get constant partial screen flicker and flashes.
View 5 Replies
View Related
Sep 1, 2014
I already have a Apple Thunderbolt display hooked up to the Thunderbolt port of my MBP Retina. Can I hook up a Dual DVI-D display with 2650X1600 to my MBP in addition? To second Thunderbolt port with Apple DVI adapter or other?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Feb 15, 2009
If i have dual displays on a mac could i have one of them displaying osx and one displaying vista or xp?
View 1 Replies
View Related
Mar 28, 2009
Got my iMac today, working great, but need help on how to hook up a TV to my system. Because my iMac is hooked up to the ACD 24" display, so the extra mini dvi port is occupied by the ACD, so then how do I hook up my 37" LCD TV to the iMac, so I essentially have three monitors hooked up to my iMac.
The ACD plugs into the iMac no problems of course, but my TV will be a different story, it's has two HDMI ports, S video and the 3 rca inputs.
Is there a splitter or something I can buy so I can add the TV to the set up. I've seen photo's here on this forum with 3 even 4 monitors hooked up, but I have no idea how to do it, searched here for a while as well.
Does anyone know exactly what adapters I need to buy to get the TV hooked into my dual monitor system?
View 2 Replies
View Related
Dec 27, 2009
I have an external monitor that I attach to my MBP to watch movies. Is there a way to turn on my screen saver or power down the screen on my MBP when I'm watching a movie on the external display?
View 3 Replies
View Related
Feb 6, 2008
I'm having a really hard time trying to find a nice freeware screensaver that will run in my TiBook with dual displays. I was wondering if anybody here know of a good freeware screensaver that will work with these requirements:
Must run well on TiBook in dual display mode (667MHz G4, 1GB RAM, 16MB Rage 128)
Must be somewhat cool/interesting.
View 5 Replies
View Related
Jul 30, 2009
I have a 40" HDTV that I have connected to my macbook pro with a DVI to HDMI cable. The picture falls off of the edges a bit.
View 5 Replies
View Related
Aug 29, 2009
I got a 24" iMac (2.93 GHz Core 2 Duo variety) about 6 weeks ago and hooked up my Matrox DualHead2Go to find it wouldn't push the two external monitors to their 2x1680x1050 potential. Ok fine, I got an Arkview USB2 to DVI adapter and had one monitor attached to the inferior DVI port, the second connected to the Arkview adapter and both worked at 1680x1050. Today I updated the box to Snow Leopard to find that neither solution works any longer.
The Arkview adapter simply disappeared. The computer refuses to see it and the console seems to indicate that it tries to talk to the adapter but gets nothing back. My guess is something changed in the way SL talks to drivers which trashed that solution. Then I tried the Matrox again thinking 2880x900 is still better than 1680x1050 and while it sees the Matrox box and sees it as 2880x900, the second monitor never "lights up". Does anyone know of anything that actually works with SL that will let me attach the two external monitors?
View 1 Replies
View Related
Apr 14, 2009
I should be getting my iMac in the next few days and more than likely going to get the 24" ACD, so I can dual display it. I know there is a difference in height, so going to VESA wall mount the ACD. I know the 24" ACD is LED and a slightly different screen to the iMac, the question I have his will I be able to get the screens to look pretty much identical i.e. brightness, colours or will I have to get something to calibrate the screens?
View 11 Replies
View Related
Sep 19, 2009
I am soon going to be buying a Macbook Pro to replace my hackintosh and return my hackintosh to a well spec'd windows PC with dual monitors (one of which will also be connected to the MBP.
Which monitor should I go for?
I have been using a Samsung SM2333sw and love it. It is a TN panel, but it is perfectly usable for my needs, however, the bezel it quite thick so doesn't work well as a dual display option.
The only key features is that the monitor needs to be 23/24", have 2 inputs, and have a fairly thin bezel.
I need to be able to get both screens for around �250 each.
View 7 Replies
View Related
Jun 8, 2009
I have a 24" ACD plugged into my iMac, and they work well together (other than the ACD needing a boost, but we'll discuss that some other time).
I can't seem to get backgrounds to stick; I set a background on both displays, but whenever the machine wakes up from sleep or a screensaver, it's back to the default nebula/star field of Leopard. When I try to once again set those displays, the folder containing the pics, which had been added to the preferences interface, has disappeared from that pref pane.
View 6 Replies
View Related
Jul 8, 2009
i have 2 LCD's hooked to the new Mini as such:
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
View 9 Replies
View Related
Sep 3, 2010
I have an issue with my 4870 (Mac edition) that has been occurring since day one (when I purchased it last month), but it's not something that happens every single time.
I've run into a problem that the 4870 has trouble recognizing one or both monitors plugged in. If I shut off power to my displayport-connected main monitor, it'll throw the menu bar, all the desktop items, and application windows onto the second monitor (DVI-connected). This also happens when I shut off the second monitor (desktop items and app windows get shuffled to the main monitor).
The other issue is that on startup, it may just be slow to recognize one of them, and the above screen-swapping issues happen anyway, followed seconds later by the screen once again being recognized.
Has anybody else faced this issue? Is there something that can be done? This shouldn't be happening, right?
View 6 Replies
View Related
Jul 5, 2009
6 weeks ago I bought a Mac Pro Dual Quad 2,66 with an ATI HD 4870 graphic adapter. System is OS X 10.5.7. I try to get an Eizo 30" display (SX 3031W) working with this configuration. Using the signal connector #1 on the Eizo , the display will show up to 2560x1600 resolution (as it should be) but after selecting this option will fall back to 1600x1200 pixel. I tried installing on the DVI plug of the card and also on the minidisplay-port using the "Mini Displayport to Dual Link DVI adapter" from Apple but up to now it does not work.
View 1 Replies
View Related
Mar 18, 2012
I just got a displayport to dual-link dvi adapter for my 2011 mac mini. Using a HP LP3065 display, and it keeps flickering! Is there something I can do to make it stop? Does the adapter have firmware that can be updated?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Sep 3, 2009
I have the stock video card from my g4 mdd 1.42ghz
its 64mb
agp
ati radeon 9000
1 dvi
1 adc
what i know: the 1 dvi can push relatively big monitors. to make dual display work i need a adc to dvi converter. what I dont know. can this card drive 2 19" monitor maxed out ? (1400x900)?
View 2 Replies
View Related
Sep 16, 2008
I'm a PC guy (unfortunately), and I wanted to get my wife (graphic designer) a Mac present for our 3 year wedding anniversary (maybe a bad choice). As a cheep axx i looked on eBay for best deals... and happen to stumble upon an old G4 (Gigabit Ethernet) Dual 500MHz tower. I understand that is a old model, but the budget constrains gave me a no better choice... $300-400. For the first Apple it is a start.To make it up i got her a 23" Cinema Display.My dilemma as you see is the old vs new technology. I have not yet received the merchandise, but as i read I'm up for a surprise.
1. Do i need a power adapter for the display?
2. Do i need a ADC converter (or something like it)?
3. What (cheep) Graphic card will be a plausible fit to avoid conversions?
4. Will that card work with my motherboard (if there is one inside lol)
So far browsing i got:
Recomendations
RADEON 9800 Series
Requirements: Power Mac G4 or G5 with NVIDIA graphics card or ATI Radeon 7500 or better graphics card Limitations: The Power Mac G4 Cube computer must have a Nvidia Geforce 2MX graphics card to be compatible with the Apple Cinema Display HD or Apple Cinema Display (20-inch). he Power Mac G4 - (Gigabit Ethernet) video card does not support the Apple Cinema Display HD or Apple Cinema Display (20-inch) unless the original video card is updated to one that meets the specification for the display.
View 12 Replies
View Related
Feb 13, 2009
I recently purchased a miniDVI to VGA adaptor, and set up a dual monitor (37") to my iMac (24"). The problem is, the new monitor is only displaying at 1440 x 900.. i'd like it to be able to show 1920x1080; the actual resolution of the monitor. Any way of doing this? (the maximum resolution in the display preferences is 1440 x 900)
View 1 Replies
View Related
Mar 23, 2009
Has anyone tried hooking up a two 30 ACD's to a 4870 on their MP.. just want to check if there are ANY issues with this setup.
[URL]
View 24 Replies
View Related
Sep 13, 2010
I have an 17" i7 MBP which has connection issues with my Airport Express. Sometimes, it connects on the first try, other times I have to turn the airport, on the MBP, on and off several times before it will connect. Sometimes that won't even work, so I put the mbp to sleep, wake it back up, then it will connect. Once connected, it works fine and never have any of the disconnect problems I have read about.
The other weird thing is that at the office, where we use non-apple wireless access points, I never see an issue.
View 3 Replies
View Related
