A put a blank CD into the port, to burn music onto it, and after i pushed it in, my laptop did not recognize it.Therefore the eject button is useless and its stuck.
Info:MacBookPro
Today, I was doing a time machine backup, and the backup failed. Ok, it's normal since the drive started updating the firmware. But after the firmware update failed (updater got stuck), the drive now spins, light on, but the MBP won't see it, and neither will the firmware updater. If so, what was the solution? Just have to go for the warranty?
View 9 Replies View RelatedSo I bought that LG HD-DVD/Blu-Ray drive for my Mac Pro. I used the extra SATA ports near the fan to install it, and it works great while using OSX, but it won't work in Windows.
I read somewhere about enabling AHCI or something like that in Windows so it can recognize the spare SATA port, and therefore recognize the Blu-Ray drive, but I cannot figure it out for the life of me.
It's awful confusing...
I want to be able to rip my Blu-Ray movies onto my computer to pop them onto the tv, but the only hurdle is having Windows recognize the drive. Any help at all would be very appreciated.
I have a G4 400mhz and 10.3.9
I recently used a usb CF card reader and mistakenly yanked the cable out before 'ejecting' it.
Now my two trusty canon digital cameras (which I reliably connect directly to the usb ports - no card reader needed) are not recognized.
I understand this particular issue has been discussed at length on this forum and in other places but none of the solutions have yielded any success for me and I see this is often the case for others. So, I'm posting the question again in hopes that there is an Apple guru out there who has figured this one out. (All relevant specs below.)
Problem: Firewire port was working fine for downloading video from a Panasonic PV-GS320 into iMovie 8.0 on an iMac 10.5.8. Then, suddenly the firewire port was no longer recognized: FireWire Bus: Warning:Unable to list FireWire devices. Maximum Speed: Up to 800 Mb/sec The problem cannot be with the camera or cable as I can swap them over to an iBook 10.4 and the camera and firewire download perfectly there. I have run AHT. Test results show no hardware problems. I've tried all of these
[code]....
Someone tripped over the wire of the MagSafe charger, and it came away from the macbook, but split the L-Shaped part in half, and left the magnetic end stuck inside the charging port, and the other part exposing the gold pins. Is there any way I can remove the magnetic part myself? Or should Apple be able to do it for me?
Info:
MacBook Pro
So I plug my external hard drive into my IMac via a usb port, the drive turns on but the drive never appears on my desktop. How do I access my external hard drive when it is not recognized automatically?
Info:
iMac, OS X Mountain Lion (10.8.5)
So I just received a used macbook that has something stuck in the headphone port. What this means is that os x wants to use the optical out (digital) and once it does that there is no way to use the internal speakers. And, because it is stuck, I can't use headphones either. Temporarily, I am trying to use an old USB external Creative sound card for my audio, but when I plug it in all it does is recognize it. I tried plugging into every port but nothing.
View 1 Replies View RelatedHow many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?
View 22 Replies View RelatedMy Macbook is currently stuck booting up in windows 7. My shift key also appears to be stuck so holding the Option key when booting up to choose a start up disk isn't an option (it doesn't work). I do not currently have access to an external keyboard. I do have the startup disk. I'm wondering if I can use the startup disk to reset the systems startup disk? Are there other options?
Info:
MacBook, Mac OS X (10.6.8)
I have just ordered a new MacBook Pro and it does not have enough USB ports for my needs.If I have a USB 3.0 hub and I mix USB 2.0 and USB 3.0 peripherals on it, will the whole hub/computer USB 3.0 port be slowed down to USB 2.0 speeds?I am thinking back to Firewire, if you have Firewire 800 and 400 devices on the same chain, the whole chain slowed to Firewire 400 speeds.I don't think this is the same with USB but wanted some reassurance..
Info:
iMac, Mac OS X (10.7), MacBook Air, Mac Mini
I am having issues with my Dual Band 1TB time capsule for some reason the damn ports won't forward I have enabled the correct settings with the ip address and the ports, but when I use a program to test if the ports are open they are always closed, regardless on pc or mac. Does anyone have a solution to this? I even reset my Time capsule to see if it would work, but no luck.
View 1 Replies View RelatedHere's the deal, I am so frustrated. I am trying to open port 59152 for Transmission on my Macbook Pro. I have the latest releases of everything, I am using an Airport Extreme base station with an older airport to boost my signal/connect my tivo w/out a wireless adapter.
I have managed to get it open in the past but there was an update or something a month or two ago and at first it was still open and then it closed. I don't know what changed with the update, all I know is that I did n't change anything.
I have granted permission for Transmission to accept incoming connections on the firewall, little snitch allows it too. I have lighthouse, which worked at first but now I don't even know why I bother having it run. I have the port mapped through the airport utility.
PLEASE don't say to go to portforward.com because they haven't updated the Airport section since Leopard came out, yet every search I do someone repeatedly tells the person needing help to go to [URL]
I am going to attach some screen captures so you can see what I've got going on and maybe point out something I've missed.
Relevant newbie to the mac world. I have a MBP late 2009. I bought a third party Mini display port to HDMI converter so I can hook the MBP to my 46" Samsung screen.
This works fine, no major issues here. However the picture is not great. I compared watching a standard definition TV show through the MBP then burnt it onto a DVD. The DVD (using the PS3 as my DVD drive, connected via HDMI) had superior quality than through the MBP.
Also the picture does not quite fill the screen. There is a small black border running all the way around the screen. Does not sound significant but when doing the same comparison as above, you notice the difference when via DVD the movie fills the screen. I have played around with the resolution settings. Those that fill the screen chop bits of the mac desktop off, so thats no good either.
So I am wondering why this is? Is it because the mini display port is not a DVI port, hence I am not getting true HD quality picture? How can I overcome this if at all. I'm thinking of getting a mac mini as a media hub/HTPC but want to ensure I dont encounter the same problems.
is there a adapter with both a usb port and an eternet port?
View 1 Replies View RelatedThis is my first post on the forums, although I'm planning on looking around in here once in a while, to see what people are posting.
For starters, I just wanted to tell you about this little problem I've been having with my MacBook 1,83GHz.
Sitting at my desk at work one morning, peacefully drinking my coffee, I suddenly received a rather discomforting error-message from my shiny new (about 1 month old) MacBook;
"A USB devise is currently drawing too much power and the port will be deactivated.".
For anyone wanting to use their Mini Display port connector on their 4870 with a panel that has the standard size display port connector, I've found a source for a cable that works perfectly. It has the mini display port on one end and a full size display port on the other. Cost $19 bucks shipped and works like a champ. The cable is nice and compact, thinner and more flexible than my DVI cable. I'm quite pleased! ( it's the little things.... )
Here is the cable I picked up: Mini Display Port to Display Port cable
I recently bought a 2.2 Ghz Macbook Pro, and one of my external hard drives isnt recognized, its a USB powered Western Digital Passport [URL]. (Same as this one, but only 120GB). It runs fine on my old iBook G4, but when plugged into my new MBP, it doesnt run at all. Has no recollection of the hard drive at all. I've tried reformatting it, still nothing.
View 9 Replies View RelatedI just got my first Mac today. It's the 2.4 Ghz aluminum MacBook. I was really excited about starting things up, and then came setting up the internet. It recognized my family's DSL wireless network, but would not let me into it without a password. We never gave our router a password/encryption. Does anybody have any idea about what I should do? I'd really like to access the internet as soon as possible.
View 10 Replies View RelatedI am trying to connect a external HDD to the MacBook Pro. The external HDD used is Seagate FreeAgent GoFlex 1 TB powered by a USB cord connected to the laptop. The light on the HDD is not glowing neither does it feel like moving when touched. get the HDD working on the Mac?
Info:
MacBook ro, Mac OS X (10.7.3)
I tried doing a few Google searches to find a resolution to this problem, but nothing that came up seemed to work, so I'm throwing this question out there. I recently bought a 16GB PNY metal attache for my 2011 MacBook Pro (OS X). That computer fails to recognize the drive. Here are a few notes:
1. I tested the drive on a windows vista computer, and that computer recognizes the drive. I can read/write from it on that computer.
2. Neither USB port on my apple is faulty; other USB devices function fine via both ports.
3. I have tried several solutions including:
a) Restarting
b) Powering off, unplugging the power cord, waiting 15 seconds, replugging the cord, and booting up the computer
c) Restarting WITH the drive in the port
d) Leaving the drive in for a while to see if it would eventually recognize it (no results)
e) Reformatting the drive to FAT32 to make sure it's possible for my mac to read/write from it
Info:
MacBook Pro (13-inch Late 2011), iOS 5.1.1
I just bought today a Mac Book Air 11 "and my 3G dongle is not recognized at all on Mac yet it works fine on my Mac Book Pro Mac OS 10.6 Snow Leopard
Info:MacBook Air, Mac OS X (10.7.4), Modem 3G USB : HUAWEI E173s
My iMac is I think 2009 model. It comes with a mini-display port.
I have a Dell monitor which has a Display port input and I want to use it as a second monitor. The DVI input in the Dell monitor is taken up.
But how do I connect from the mini-display in the iMac to the Display port in Dell monitor ? Doesn't look like aplle sell this connector cable !
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
I recently bought a macbook pro 13, and this is my first time using my camera to take the pictures out. Whenever I go onto iPhoto or Image Capture it says the file in not recognized. Does anyone know what I can do?
View 2 Replies View RelatedI have a 17' MacBook Pro and when I connect my PNY 8gb USB it does not recognize it. It only recognizes it if I boot the Mac with the USB already connected.
View 3 Replies View RelatedI have a MBP mid 2009 ( 3.06 Ghz - 8GB Ram). Through work I managed to obtain a Lenovo 256GB ( Toshiba ) SSD. When I replace the current 500GB drive with the SSD and boot with the snow leopard (10.6.3) disc, the drive is not recognized. I go into disk utility and the only drive is the DVD drive. I put the SSD in a pc laptop and booted with a Ubuntu Usb drive and it found the SSD first go, no issue, so the drive works.
Info on drive sticker is
Lenovo PN: 45N8206
Lenovo FRU : 45N8207
SOLID STATE DRIVE
THNS256GG8BAAA
So I expanded a bootable .iso image of openSUSEx64 11.3 onto my 16GB USB thumb drive following the steps I found on a website. When I restarted the MacBook with the option key pressed, the USB drive did not appear. Why the USB drive's not being recognized at boot-up? Here is the website I used (option 4): URL
View 8 Replies View Relatedi bought a new alum. macbook about 3 weeks ago and so far i love it, but suddenly my isight camera isn't recognized in anything, and it doesn't light up? What could be wrong?
I tried in ichat and in photobooth
I have the 13" MacBook Unibody with the 250 GB HDD. I wanted to replace that with my Seagate Freeagent Go 500 GB external HDD. I took off the enclosure and replaced the 250 gb with the 500 gb but the computer won't recognize the new 500gb HDD. All I get is a blinking question mark during start up which I know stands for HDD issues. The 500 gb HDD is working fine btw, I tested it after I took it out of the enclosure.It is a Serial ATA 2,5" and works just fine. Is the Macbook 13" Unibody not supporting 500 gb HDDs maybe? I checked the specs for the MacBook Pro 13" which is supposed to be the same as the one I have and it does say that it supports 500gb HDD.
View 2 Replies View RelatedRecently I bought a new mouse, I was overexcited and plugged it in, and there was a pop up saying there was a new keyboard but I clicked "Contine" this mouse doesn't work at all now, I thought it doesn't support mac at all! I searched about it on the net, they said that when they got that same pop up, they click "x" at the top left corner, you now, exits the pop up and got to use the mouse immediately. I tried it at my dad's laptop, got the same pop up but instead of clicking continue, I clicked "X" The mouse Works. So now I think this mouse is recognized as a keyboard on mine.
Additional Info:
Steelseries Ikari Laser (mouse)
MacBook running Leopard.
