I have a macbook pro running 10.6.8 & the cap lock turns on when I press the 2nd bracket key. The cap lock stays on until I press the 2nd bracket key again. It will not turn on when I press the cap lock key or shift cap lock key. I tried resetting all shortcuts in system preferences & rebooting the computer, but it is still the same. I can't use the 2nd bracket key now
Info:MacBookPro, Mac OS X (10.6.8)
I just read a thread on Undercover and it reminded me of a question I wanted to ask earlier this week.
I'm going to college in september and it seems as if a Kingston lock is not a good choice. There are a number of things on youtube including yanking the notebook, pulling on the lock itself and using cardboard to open the lock. This makes physical locks look bad. Would software be a good alternative? How about lojack for laptops? Apparently they'll get your laptop back regardless of where it ended up. If not, they'll give you a grand. Seems like it would be hard to do if it was chopped up like when a thief brings a car to a chop shop.
[URL]
out of the blue about 3 months ago my MacBook(version10.4.11) started refusing to recognize my home wireless. the problem has now reached the point where it AT TIMES will display that the wireless newtwork is on in the toolbar yet the computer will not jump onto the internet. Now it has reached the point where it won't even show that it sees the wireless in the toolbar. I have reloaded all passwords , checked the Verizon wirelss set up, reloaded firefox , checked all firewalls. The wierd thing is that my kids macbook is fine. Mine is the one with the problem.I checked all my settingts to correspond/copy hers and they do. Have zapped pram too. It works fine EVERYWHERE else but home.
View 3 Replies View RelatedStarting about 4 months ago my 3 year-old 2.0GHz Core Duo MacBook's wireless started to not work very well. What was happening is that after starting the computer or waking it from sleep, it was able to connect to my network, but after about 5 seconds it would lose the signal despite being physically very close to the router without anything to block the signal. The problem progressively got worse, and at its worst it was only able to connect about 1 in 10 times. Either it wouldn't find the network at all, or it would find it but couldn't connect because "The connection timed out" or something like that.
I never bothered fixing the problem because my Mac was having a bunch of other issues at the time, so I was just going to fix them all by doing a fresh install of Snow Leopard once it came out.
So 3 days ago I did a fresh install of Snow Leopard (I formatted the harddrive then did a fresh install, not an archive and install). Unfortunately, it only kinda helped the wireless problem: I can now connect half the time rather than 1 in 10 times like it used to be.
I'm quite sure my network isn't the problem because everyone that has used my network in the recent past (which has been about 10 different PCs, Macs, and iPhones) hasn't had any problems. FYI, I have a Linksys WRT54G wireless router.
my ichat was working earlier today and now its not.i installed a couple of things since the last time i tried and i think that is why its not working.
I've got a macbook pro unibody and basically of the two usb ports. The lower one is working fine
but the top one is acting a bit funny. If I put my mouse or graphics tablet in there it doesn't work but if I put my phone or usb drive in there they work perfectly.
After re-installing Lion I've had this very annoying issue with tap-to-click on the trackpad of my MBP. While it seems to work most of the time, I often have to move the cursor away from the button or click on a window as if to make it active in orer for the click to work. A similar problem is occuring in MS Word when I'm going through the spell check process - I have to sometimes click "ignore" multiple times or click somewhere else in that window for the click to register. Â
Info:
MacBook Pro, Mac OS X (10.5.4)
It seems that there is some problems with USB 3 hard drives.I have a NewerTechnology Voyager Q.The drive mounts to the rMBP, but I recieve lots of errors when trying to access the content on it.
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
I own an 11-inch Mid-2011 MacBook Air. The internal camera flickers on and off and occasionally shuts down completely. Before recent OX update, it didn't come on at all.
Info:
MacBook Air, OS X Mavericks (10.9.2)
Well just installed XP on my boot camp partition. Here is my issue:1. The trackpad doesn't seem to be working properly. It's showing under device manager fine but the 2 finger right-click option isn't working. 2. Is the keyboard supposed to be backlit in XP?3. The sound buttons on the keyboard are not working (f11-f12)
View 5 Replies View RelatedRight i've had my white macbook for a few months now, its at 91 cycles and 99% health... this morning i turn it on and the health has dropped to 86% !? any idea why this has happened, and if theres any way i can get it back up.
View 3 Replies View RelatedI just got a mac book pro and I transferred all my applications from my old g4 but handbrake doesn't work the same or doesn't at all. It takes very long to scan and it doesn't let me rip. I tried the same dvd on my old g4 and it worked just fine so it's not the dvd.
View 13 Replies View RelatedSo recently my macbook decided to stop working properly and now the sound cuts in and out. I called up apple and they said to repair it, it was gonna cost upwards of 300 dollars 0_o. So i was wondering is there anyway i can fix it by myself or are there any other ways that i can get it to produce better sound ie speakers that will work of their own soundcard.
View 3 Replies View RelatedI bought my first Mac computer last month, the 13" 2.4 variant. Loving it so far.I have lately noticed however that my ambient light sensor is not much of help. Before, after coming out of sleep I could notice the screen changing to accommodate for the room's light output. I could also put my hand over the sensor near the iSight and witness the brightness decrease in front of me.
I updated to 10.6.4 the other day on my mbp 17" 2.93 mid 2009 model the other day. Since, my computer has developed two problems. first and most annoying, the keyboard doesn't work properly anymore. Shift keys don't work, then they do work. One side doesn't then the other side does. option and command do the same thing. Is this a documented problem? I searched and saw it was prior to 10.6.4, but I never had any problems until this update. Also, when I shut my computer, instead of going to sleep now. It goes crazy, fans jack up to full speed and it gets super hot. Doesn't sleep at all. Funny enough before the update, when i closed the lid the computer would go to sleep and wouldn't wake up.
View 1 Replies View RelatedIn-built webcam isn't working properly
Info:MacBookPro
I am using a MacBook Pro 15inch (bought last April) Recently I have noticed that after short periods of time of using it, the laptop seem to get very very hot, a lot more than usual. I have also noticed that the fans get quite loud when it is doing some heavy processing, but a lot more than normal..My main concern is hot it gets, is there some way to check if my fans are working properly.
View 2 Replies View RelatedI have a late 2010 MacBook Air that is running OS X 10.9.3 .
Lately I have noticed that my delete key is now working as a backspace key.
This is super annoying and I have tried googling the problem, but I haven't found a solution yet.
Also, my top row of keys (volume, brightness, etc,) are not working unless I hold down the fn key.
Info:
MacBook Air, OS X Mavericks (10.9.3)
I recently purchased a Retina Macbook Pro 15" no more than 3 months ago.Â
Today I just noticed that whenever I connect my headphones I can hear the left channel clearly but the right channel is a lower volume and distorted.Â
at first I thought it was the headphones, but have tried various ones and it doesn't seem to be that.Â
Also, output from the internal speakers sounds fine, same level on both channels and clearÂ
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
basically i havent had my macbook air that long (few month, maybe few more) but all of a sudden the click button on the trackpad has almost became slightly annoying, that when you press it slightly it clicks in as if youve clicked but nothing has happened, and then i press a slight bit more (normal pressure for a click) and it works normal. its just really annoying and it seems to be getting worse at one end, and ideally id like it to stop.
View 13 Replies View RelatedI just bought a macbook pro last week. Since using lion, I have noticed a problem clicking. Such as opening folders, minimizing windows, clicking the back space button etc. I click on a few folders and they open, and then I try to click on another one and it refuses to open no matter how many times I click on it unless I unselect it and try again. It is not consistent to specific folders/icons, it just happens at random.
It is as if the OS is not registering clicks consistently, like it were a hardware problem. Also my right click malfunctions at times and will either not work or will behave like it is the left click and vice versa and takes awhile to regulate itself. Keep in mind I use both a wireless usb mouse and my trackpad and this is a problem I experience with both of them. I am using the latest version (10.7.3)
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a macbook pro (i7) 13'', everything was working properly, but out of a sudden the keyboard is dead & won't respond to anything, now I can't login. I restarted it many times but still the same problem.
Info:
MacBook Pro
Just this morning, I opened my MacBook which had been sleeping overnight. for some strange reason, even when the screen was up, the light at the button was still glowing (indicating it was asleep). I tried forcing it to shutdown. When I turned it on again, it went to sleep mode right when the desktop was about to load. I tried booting from Windows 7 but sure enough, when I reached the login screen, the computer went to sleep. I concluded that it was definitely a sleep sensor problem.
Info:
MacBook, OS X Mavericks (10.9.1)
My trackpad suddenly stopped working well more precisely is being erratic. When I move my finger across the pad the pointer is not moving and when it does move there seems to be a lag. The gestures are not working properly etc and the pointer would move on its own not by much but a little bit. I have tried SMC and PRAM and that has not helped. I attached an external mouse and was having problems with moving the pointer, however when I selected disable trackpad when external mouse is attached the external mouse worked just fine. All of my software is up todate I am running OSX 10.6.8. I hope I do not have to get another track pad the laptop is about 7 months old and I have an apple care plan but I am out of the US for the next couple of months so I am looking for fix I can do myself.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
I can't backspace anymore. And just now, as I type this, I noticed if I press delete I -forward- delete, and I can still highlight text and delete it that way. How do I change the delete key to backspace? Also, my arrow keys used to move the cursor within text. now it just scrolls the page up and down.
View 4 Replies View RelatedMy Trackpad on my MacBook isn't working properly. I can move the arrow around the screen but I'm unable to open any applications. I plugged in a mouse and it works fine. The trackpad settings in system preferences seem fine, I didn't spill any liquid on it and didn't let it fall.
Info:
MacBook
My dictionary is synced to my spotlight, so when I type in a word, it defines it. But now it doesn't. It also loads only a few icons of the files I'm searching. I have MacBook. (2008)
View 1 Replies View RelatedI have no idea what has changed other than I have been messing with GeekTool today. Some of my widgets are not working properly.
iStatPro
VersionTracker
and any WebClip widget
They are all stuck at a fixed size (not the same form one to the next) and redownloading has not fixed the problem.
What's the best way to uninstall this Snow Leopard beast? I've backup files in Time Machine but I'm not sure of what system folders and/or files should be restored.
View 7 Replies View RelatedI have an iMac Core 2 Duo running Snow Leopard V10.6.3 with 4 GB RAM... I've seen the threads regarding the inability to "Empty Trash" and the error code. When I open the Trash window, it is empty. When I place a single item into Trash, there is one item seen in the window. When I Empty Trash, there are then six items being deleted. If I place three items into Trash, then eight items are deleted... etc., etc. What are those weird ghostly five items??
View 10 Replies View Related