I have been trying to install Windows 7 Ultimate on my 13" Macbook Pro (mid 2010). Obviously I am using Boot camp to do so. The process always begins smoothly, but whenever the installation gets to the "Completing the Installation" step it freezes and I have to force restart my computer. I have tried countless times with both Ultimate and Home Premium, both copies are authentic.
Info:
MacBook Pro
so I have a 1.33GHz iBook G4 with 1.5GB of RAM and a 40GB hard drive.
Last night I reinstalled the OS, which is to say I reinstalled the Leopard upgrade disk. All went well.
Then I pulled out my time machine back up, opened Migration Assistant and started moving everything over, and that's where it all went horribly wrong.
The first time I did this it stayed at 4 minutes remaining for about an hour and a half. I gave up and hit quit, but something'd been copied across because my hard drive only had about 9GB left, but I can't see any of the stuff that's taking up all this space.
So, I whip out the Leopard disk again and start all over. I figure maybe Migration Assistant's just one of those things that needs to sit for ages. This time it seemed to freeze at 38 minutes remaining but I went to bed and left it.
I have recently downloaded a copy of Windows 7 on my macbook pro in attempt to bootcamp it so i can play more games. everything went well until it booted to windows installation. from there i clicked start installation and it gave me two choices either to Update it or Customise it. I first chose Update but it didnt work. I then tried customise, and found out that my partition wasnt in NTSC(or whatever) format. So i stop my attempt to install it and tried to go back to mac. I could not go back to mac. i dont know how. I'm stuck there with the installation disc in the drive. I cant go forward with the installation and i cant go back. I finally figured how to get the disc out, and i thought that if i install the Mac OS X again it would fix things so i insert a Leopard installation disc. I was Completly wrong, and now i am stuck at a black screen telling me to insert an installation disc with the Leopard disc in side. I cant do anything now .
I need help please, any valid solution will be appriciated.
THanks in advance
I did not have enough memory and I had already deleted some games in the past to do updates. Well I downloaded Windows XP Home about half a year ago and decided I really did not use it all that much. When I downloaded It i cut the memory in half (1/2 OS X and 1/2 Windows XP) So I went back to my Bootcamp installation papers to see how to properly uninstall Windows. So I did and everything seemed fine the only thing I thought was odd is that it only took like 3 seconds to uninstall so i knew it did not actually uninstall. I did not think much of it cause I could now download the update.
View 15 Replies View RelatedYesterday I created a bootcamp partition and installed Windows 7 64bit (only for gaming).
After the installation Win7 had already identified all the hardware, except the Bluetooth adapter (but i seen the drivers in the Windows Update) and the video driver (same as the bluetooth).
Then I put in my OSX DVD and installed "bootcamp software". It installed various drivers (chipset, video, bt etc.).
Now my question is: are this the correct method or maybe is better install only the missing drivers, after a clean OS install?
Because now I can't uninstall ATI drivers (the are 10.7 rev.), I have not the CCC (for adjusting some setting, i.e. forcing v-sysnc) etc.
I'm doing the upgrade path from 10.5 -> 10.6, will it erase or damage my existing bootcamp partition? I want to avoid the hassle of installing windows again
View 1 Replies View RelatedI have a new Macbook Air and am trying to complete the Migration Assistant from a Dell XPS PC (laptop). The process will begin just fine, but says it will take 9, then10, even up to 11 hrs., etc. then doesn't wind up working even after those time frames have passed.
I have a very fast internet connection, so I am not sure why this would be happening. Is there a way to use an ethernet cable instead of wifi? I tried connecting the two computers with an ethernet on a whim but my Mac didn't reconginze the PC, and vicea versa.
I'd like to avoid manually bringing over my PC files if at all possible..
Info:
MacBook Air, Mac OS X (10.7.3)
I'm having a problem with autofill not completing passwords. Usernames / IDs are being completed on websites but associated passwordsa are not being autofilled. I have tried to delete them from Safari/Preferences/Autofill/Usernames and Passords but I cannot delete a single entry or even the entire list! I have even tried deleting the site info: UserID and password from Keychain Access and then re-entering them manually but this does not seem to rectify the problem. Every time I open a website with a log in required, the username / ID is autofilled, but the password is now not. (It all worked previously) When I input the password, a dropdown window asks if I wish to have it remembered and I say yes, but it is not.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I am unable to install Windows XP using Boot Camp Assistant. On multiple attempts, the install process crashes in the middle with an error message that reads:
Press any key to boot from CD ..
Disk Error
Press any key to restart
I am having trouble loading window XP pro OEM sp2 using Bootcamp on my macbook OSX 10.5.8 It gets through copying all the files and reboots successfully through to the install window and the setup program for windows (where it displays various marketing info and has dot buttons down the left hand side). It says it will take 39 mins to setup but the counter never changes and I have left it up to an hour and nothing happens although once I did get a disk error message (something about cleaning the CD - can't remember exactly). I am doing full installs and have tried FAT and NTFS. At first I thought it was because it was an OEM but it is a Microsoft OEM and other people online seem to have no problems and do not seem to get as far in the install if it is that. Is this a dud CD or version of windows or am I just doing something wrong?
View 2 Replies View RelatedI'm trying to install Windows 7. I have a Macbook Pro running 10.6.x (I forgot the last number).
I started BootCamp assistant, and it prompted me to partition. I set up a 32Gb partition for Windows.
Then..it said to put in my Windows CD and hit start. I did that...and it started loading Windows. Everything went fine...until Windows told me to choose a partition to install to.
None of the partitions were NTFS so Windows couldn't be installed.. So I held down the power button, and tried to boot back into OS-X. But...it booted back into Windows...now it won't boot into OS-X.
It keeps being stuck on the "Starting Windows" screen.
I went to do a system update which froze on "Configuring The Install" (or something similar). So I gave my quad Mac Pro a cold reboo and I get a prohibited sign, or whatever. (You know, the ghostbusters symbol without the ghost.) I know, I deserve that though, shame on me for turning it off during a system update. I waited a LONG time. I don't think that's the root problem though. Anyway, I boot up via the system CD, load up Disk Utility, which (takes forever) and after trying to Verify, I get an "Invalid B-Node Size" error. I try to click "OK" but Disk Utility continues to be unresponsive for a long time. I wait it out, reboot back into Windows and here I am.
The hard drive is super old. Like probably 7 years. It's a Maxtor 6Y120, 114 gig SATA drive. So I think it's probably just failing. Disk Utility couldn't unmount it or verify it. So what I want to do is just reinstall Leopard, but I have a LOT of work stuff on my Windows drive. (A separate physical SATA drive, not a partition.) Obviously I will back it all up, but I would definitely like to avoid reinstalling Windows, all my apps, and restoring my work files.
So I have a couple of questions - 1) Will re-installing Leopard "orphan" my Windows bootcamp drive, so I can no longer boot into it? I would want to erase my Mac HD or possibly buy a new one to replace it. Which brings me to my 2nd question - 2) If I buy a completely new hard drive and install Leopard there, will my bootcamp partition still be bootable/intact? Or will they hate eachother?
So I installed XP on Parallells recently, but I also want to set up Bootcamp.
Is there a way i could use the same XP I installed on Parallels also for Bootcamp so I wont have to use up space installing XP again?
I tried to install Bootcamp (XP Pro SP3) on my Mac Pro (2.66GHz....) and it was not playing nicely.
I have OSX on one HD and I wanted to install XP on a 2nd internal HD. Everything started OK but the installation of XP just gave up on me so I decided to go back into OSX and start again.
No joy. Now when I boot my Mac Pro I got the 'bong' but nothing happens.
I have tried removing the HD that had XP on, still no joy. I tried booting off the OSX DVD, no joy.
My guess is that XP has screwed something on the boot loader (or whatever it uses). Is there anyway of doing a hard reset of that to get OSX back?
I have a new iMac 27 i7 with 8gb of ram coming next week. I'll be installing Windows 7 for use in bootcamp mostly for iracing. Do want to install the 32 or 64 bit version of windows?
View 9 Replies View RelatedI am having an issue with using bootcamp to install Windows onto a 25GB on my 2010 2.4GHZ MBP.
At the stage of installation when windows setup reboots the laptop, installation does not continue, instead a black screen appears for a while then the message press any key to boot from CD/DVD. Doing this then starts the setup again from the start.
I have partially remedied this problem by sitting at the laptop during installation and at the point of restart holding down the option key and selecting to boot the windows drive which then recommences installation.
However after a minute or so of 'finalising installation' (or something along those lines) the system completely freezes, the mouse does not move etc and it will sit there happily for 30 mins without doing anything until I turn it off.
This has been tried with 2 copies of Windows; a genuine copy of Windows Vista 32 bit and a perhaps not so legitimate (OEM edition) of Windows 7.
Both have the same problem of restarting to reload the disc from the start, although I have only tried my partial fix with the Windows 7 installation (will try on the Vista disc tomorrow).
The apple support on the issue is very vague and their guide essentially skips the whole installation of windows - goes from booting the setup disc to after installation install your macbook drivers >.>
Any suggestion on what the issue may be?
All help appreciated as I really want Windows on my system in the next few days before I go to university so I can use Microsoft Office on it (do not feel like buying a new version for mac).
Are there any other potential solutions for me to use my Windows Office on my mac? (I'm a complete newbie to mac, have only had the machine 3 weeks or so, I've heard about virtual drives and so on but don't know fully how they work and don't see them as the better option unless absolutely necessary)
I have started a bootcamp installation on new (updated) mbp. During the install, windows-installation makes a critical error and says that the installation cannot continue.
I managed to eject the disk by holding down the mouse button, but my problem is that the mbp starts up in the corrupted windows installation and stops again. I'm in an endless rutine where I cannot boot in Leopard again.
I'v tried to give it the Leopard installation disk but it's beeing ejected. How do I get pass bootcamp and into OS X again.
I installed Windows 7 on Fusion and want to install it on Bootcamp, and now realized that I should have installed it on bootcamp first. Is it possible to use the current Windows fusion installation to run bootcamp from? or do I need to partion bootcamp and do a complete reinstall of windows? Pretty much wondering if I'm going to have to have 2 separate Windows 7 installations?
View 1 Replies View Relatedi installed windows through bootcamp, but i think i changed the partition and picked the wrong way to format it without knowing. Now when i hold the option key, only a windows drive appears and no os x one.
How do i fix this, i dont mind if windows is gone entirely.
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
As you can read as the topic title, my shutdown speed is now SLOW after installing Bootcamp. Is Bootcamp the problem? I've tried to repair disk, repair disk permissions and all that stuff. What can be the problem?
View 4 Replies View RelatedWhile installing windows 7 via bootcamp tonight, I suffered a power failure a minute or two into installation. Upon reboot, I have only a black screen with flashing curse. I have attempted to reboot in safe mode, recovery mode and diagnostic mode, but I think the machine is not recognizing the keyboard.
Info:
iMac, OS X Yosemite (10.10.1), 2014 21.5" Fusion Drive
I have a Mac Pro (1,1) on which I'm running Snow Leopard and Windows 7 Pro in boot camp.
I recently upgraded my Mac to 10GB of RAM, and have noticed when I boot into Windows (currently the 32-bit version), it's telling me I have 1.99GB usable.
I figure this is requiring me to install the 64-bit version. This is where I'm stuck.
If I try to run the BootCamp64 installer off of the Snow Leopard disk, I get a message saying "This installation package is not supported by this processor type. Contact your product vendor".
When OS X 10.7.3 came out I tried to install it and it got to "Moving files in place" at 95 or 99 % of completion and hadn't completed 9 hours later. I forced the system to shutdown and restored through Time Machine, but wasted a lot of time working on this. Consequently I declined all further requests to update to 10.7.3. Today I was prompted to upgrade to 10.7.4, this was probably the third or fourth time I'd been prompted, so I accepted it and started the install. At 95% while "Moving files in place" again the upgrade hung and after giving it a couple of hours with further progress I again forced a shutdown and ran disk utility to repair the disk, just in case there was a problem with it, and then again restored it with Time Machine.
Info:
MacBookPro, Mac OS X (10.7.2), Early 2011 MacBook Pro
I regularly run unix commands remotely, or on network-attached drives - exampels are rsync; rm (-r) etc.
For the following assume its on a NAS drive, mounted to 'Volumes/drive"
On large jobs, i find that these processes do two things that i cant explain, nor do i like:
1. they seem to sorta slow down and stall occasionally. I knwo that's vague
2. they stop running when the computer goes to sleep
Now, the real questyion is, since an active proces is underway, why did it go to sleep?
I do have "wake on network activity" checked.
I was able to mostly eliminate this problem by turning off "sleep after X minutes" and moving the energy saver slider to "never"
Info:
MacBook Pro (15-inch 2.53 GHz), Mac OS X (10.6.8)
I recently upgraded to Yosemite. Had problems with connecting to the Exchange server so I did a restore from my time machine from the day before I did the upgrade. Now the machine starts to turn on, then shuts down. The iMac does not have a CD drive.
View 1 Replies View RelatedWhen I want to add both the name and location of a place for a Calendar event's location (say, the name and address of a restaurant), Calendar and/or its integration with Maps will auto-complete the address. But when it does, it removes the name, and only fills the address.
Almost every time I then try to manually enter the name, it still changes it to address-only when I save it.
Example:
What I want it to look like:
Restaurant Name
123 Address Rd
City, ST 00000
But what it auto-fills:
123 Address Rd
City, ST 00000
United States
How do I get it to stop auto-changing it, and to accept my changes the way I want them?
Info:
iMac (21.5-inch, Late 2013), OS X Yosemite (10.10.1), Haswell Core i5 2.9GHz, 8GB RAM
where are the system alert sounds located. for example i want to extract the alert sound played when transmission finishes completing a download. does anyone know where those alert sounds are located?
View 2 Replies View RelatedI have Time Machine backing up my MacMini Snow Leopard Server to an external harddrive. When the backup runs, it never completes, but it also does not throw an error message. It just gets stuck around 300MB or so and eventually starts over. As you can see it does not seem to backup everything. I have tried using TimeTracker to see what it might be getting stuck on but I can't really make heads or tails of it. I have even removed the old backup and started a new one. It backs up once fully (I think) and then after that it just gets stuck like this.
I should mention the drive it backs up is two separate partitions SnowLeopard Server Volume and PrimeRoot Volume, both of which need to be backuped. I was thinking maybe a permissions issue? But I just don't know where to look.
Info:
Mac mini, Mac OS X (10.6.8)
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
