I'm on mid 2010 Macbook Pro running OS X 10.9.4 and I can't figure out a way to prevent a certain wifi network from becoming known. My college's network requires an in browser sign up every time and once the network becomes known it gives me an SSL error until I remove it from the list of known networks and refresh.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
this evening, a neighbor's xfinity wireless network kept flashing what appeared to be web pages on my MBPro screen. They weren't attached to any browser I was running.Â
I'd close these pages (ads to join xfinity) but they'd keep coming back. Then I noticed that I'd been booted from my own wireless network, and xfinity was the active network!Â
It feels predatory, this behavior. How can I set up our Macs to prevent this ever happening again? When I join our wifi in our home, I don't want any other signal to elbow in, so to speak.Â
Or, if there's some kind of interruption in our wifi signal, I don't want some other network elbowing in.Â
However it happened, how can I set it up such that, if I didn't authorize a wifi network, it will be prevented from joining me to it?
Info:
MacBook Pro, OS X Yosemite (10.10), 13", 8GB RAM
MacBook. 2Ghz Intel Core Duo. OS Snow Leopard 10.6.6. I'm running a 2006 MacBook with Snow Leopard. A few months back it started dropping wifi connection. Airport would show no connection but would list my network along with others in my building. If I tried to connect with my WPA password it would just time out. At this time I was running Leopard.
Since then I've done a few things.Tried running the Netgear router with no encryption at all (same thing happens). Will lose connection and then time out trying to connect
I've tried the MacBook in a coffee shop with wifi access and at my parents (same NetGear router) and at my new apartment with a horrible Orange Livebox.
Taken the MacBook in to see the genius bar at Glasgow Apple store. Worked fine for them, but I explained it was intermittent but we could not force it to fail. I'm sure if it ran for an hour it would.
At present if I have the MacBook in the living room (where the Livebox router is situated) its fine and wont drop connection. If I walk some 5m to my bedroom it will work for approximately half and hour and then lose it. A few days ago I bought the Snow Leopard upgrade and installed it last night. MacBook runs a hell of a lot faster (yay!) but moving it away from the router and its dead as disco in half an hour.
So to clarify, the MacBook has been tested on 4 wifi networks/ locus with same issue. iPhone, Xbox 360 and PS3 all have no issues with dropping connection no matter where they are in the apartment.
Apartment is a new build and its walls are not made out of lead or kryptonite. Is this a hardware issue rather than software? When updating to Snow Leopard it was an update to the existing OS of Leopard not a clean install.
AIRPORT says the following in System Profiler.
Software Versions:
Menu Extra:6.2.1 (621.1)
configd plug-in:6.2.3 (623.2)
System Profiler:6.0 (600.9)
Network Preference:6.2.1 (621.1)
AirPort Utility:5.5.2 (552.11)
how to prevent wifi from dropping out in Lion. I did'nt have this problem when I was using Snow Lepeard.
Info:
Mac OS X (10.6.7)
Just wondering if there is anyway to block internet access temporarily.(not on my computer, but I was wondering if I could to some wacky-code stuff and such to prevent access on another computer that is in my network) The reason why I am asking this is because I think there isn't enough bandwidth to go around my house (there are 2 xbox 360s hooked up to live, and 3 computers hooked up). But just wondering if this is possible to do because ever since my step sister came here for the summer, I have been getting dced non-stop.
View 2 Replies View RelatedI have an unsecured wifi network at home and need to easily share photos between computers. I have an iMac and a couple window based computer.Is ther an easy way instead of using a thumb drive?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
One thing that has always bugged me about Mac OS is that when a network share becomes unresponsive or unavailable the shortcut on the desktop disappears and you get a glaring messaging that the share has been disconnected.Is there any way to prevent a network share from being removed just because it becomes momentarily unavailable?As an example, on a Windows machine the network share shortcut remains, you simply cannot use it but it is there and ready to go the moment the share comes back online. Is there some way to make OS X behave in this manner? Or is there a way to extend the time out interval for a network share?
View 1 Replies View RelatedI have a high speed wi-fi connection in my home. My MacBookAir looks like its always looking to connect to Network vs. just staying logged into the preferred Network. I see this is a slow process that affects the speed of my surfing the web. Â
What I'm I doing wrong in my settings? is it something to do with Configuration of IPv4 in TCP/IP; my is at "using DHCP". Should I have something in 802.1X Profile Information? Proxies; I have my set to "Auto Proxy Discovery" Â
Why cant I surf seamlessly? Why dos it look like my Wi-Fi is always trying to connect to my home Network?Â
Are there any PC Cards (I think that's what they were called) that allow you to get online when out of wifi range, when traveling etc.? Or I think I'd heard about a way you can connect your macbook to your iphone, and piggyback the connection that way, I think called a Leash perhaps? I'm travelling to my in-laws, who don't have wifi and we're trying to figure out how to get online there with our macbooks.
View 4 Replies View RelatedA friend of mine is having an issue with the wifi. When they use a MacBook on a wifi network, it tends to keep the family's IBM laptop off the network. This happens on all networks the two computers try to join, and in some cases other PCs on the network.
View 3 Replies View RelatedI've got a bit of a strange problem with my RevA - there is a network at work which is protected by WEP, I have the key and my iPhone connects perfectly, however my MBA can't even see it, it can see other networks fine and even if i try to add it manually still not joy...
View 15 Replies View RelatedI'd like to find out if anyone has been stealing my wifi. All the other places I've looked don't have information for Macs.
Info:
MacBook, Mac OS X (10.6.8)
Since about 2 days ago, my wifi on my Macbook air running 10.7.3 Lion does not connect to any wireless network, whether it's naked, WEP encrypted, or WP2 encrypted. It fails on 'Network Settings' Network Status step (Wi-fi and Wi-fi settings are 'green'). In fact, I can use my other Macbook running 10.7.2 Lion as well as my Android phone to connect to the wireless networks my Macbook air cannot connect to. Â
What I find really weird is I tried re-installing Lion on my Macbook air using the 'command-R' key on bootup. I was able to successfully connect to my WEP encrypted router during the re-install. But once it was done and re-booted I once again cannot connect to any wifi.Â
So something really funny is going on while OS-X is fully booted on my Macbook air.Â
This is pretty crummy situation to be in because the Macbook airs don't have a default ethernet jack built into it, so the computer is somewhat useless.
Info:
MacBook Air, Mac OS X (10.7.3), wifi
My MacBook, circa 2007, refuses to connect to my home WiFi network, despite having added my MAC address, being WPA encrypted, updated firmware and the like. I haven't had a problem in the last year, until I started taking my laptop to work. It connects to my work wifi network, WPA encryption, and every other network. I have no idea why it wont connect at home. I'm running snow leopard, other macs and PCs at home can connect... It seems I'm missing some odd quirk, I've seen a few threads of similar complaints, but no working resolution. Any ideas? I've wiped out Safari, cleaned all network settings, and it all started once my use shifted predominantly from home to work. Hmpf.
View 1 Replies View RelatedI have a NetGear Router, locked to a Cable Modem from my ISP, I use a WPA setup with Tkip. I have had this enabled since last November. Now for some reason today, the MacBook will NOT CONNECT, it asks for a WPA code, even when I enter the code it comes up "connection timeout"
I have rebooted the entire network, and while everything else connects the MacBook refuses point blank to even attempt, with the connection timeout message showing within seconds of an attempt.
I cannot restore due to GB's of Data being on the HD and no Mac compatible external available.
I have D-Link 824VUP and printer Xerox 6115 connected to dlink by usb, and macbook also, The question is "How to install printer for using in wifi network with my macbook?"
View 1 Replies View RelatedI have an existing network set up for my wi-fi and use apple time capsule as a router at home.I want to update the network password as I have not done this. I also want to set up a guest network account that I can separately set up access to.
Info:iMac, Mac OS X (10.7.3)
I can see my neighbors network but it doesn't even show my home network. Both iPhones are connected and working fine, our blu ray player is linked and getting good signal.... One day it just happened to not be there and it won't find it anymore. I have the Medialink n-router. I haven't changed any router settings...
Info:
MacBook Pro, Mac OS X (10.7.3)
How can I change the preferred order of networks on my MacBook Pro? There used to be one network at my office. Now there is a second higher speed wifi network also present which I would prefer to connect to, but the Macbook connects to the older one unless manually changed.
Info:
MacBook Pro, Mac OS X (10.6.8)
My macbook pro won't connect to my wifi network at home
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.5.8)
It will connect to it fine manually, but when it open it up it tells me that none of my preferred networks are available. I've modified my list of preferred networks, still doesn't work.
Info:
MacBook Pro, Mac OS X (10.7.4)
I Am using my phone to post this because my computer won't connect to the internet. I am at school and to access the internet you have to connect and then open a browser to accept terms. With my phone the login auto pops up when I connect and same with my iPad but my new MacBook Pro retina doesn't pop anything up and when I go to the browser and try to get the login page to show up all I he is network error. Wifi symbol shows and ! With an alert no internet connection. Tried running diagnostics and that did nothing. Restarted to no avail.
Info:
MacBook Pro with Retina display, iOS 7.1.2
I have a house that is not ideal for wifi. In particular, my office is an extension off the kitchen which has a solid brick wall between it and the rest of the house. Through 2 airport extremes, i get great wireless N signal everywhere in the house except this office. So, i added a 'N' airport express at the base of the stairs to this office and 'extended' the network.
So, i have 2 macbook pros up here. One is running on batteries, sitting on my desk, lid open. It is showing a rate of 108, signal -66 and noise -88 in the advanced wireless clients section of the airport express which it is getting it's signal from.
The next is closed and connected to a LED 24" cinema display. It is right next to the other MBP. It is showing a rate of 41, signal -80 and noise -93.
Why such a huge difference? Would it be because the lid is closed, it is connected to the display or a faulty macbook?
I just installed windows 7 ultimate on my macbook via bootcamp. I installed all the drivers and everything seems to work perfect besides one thing; I can't connect to the internet with my WiFi. My iPhone has WiFi signal, and if I go back to the mac OS X side, my WiFi has signal. When I'm on windows 7 it doesn't even detect any wireless networks (I have quite a few around the house too.)
View 13 Replies View RelatedI've done a little digging and cannot find an answer to this problem.I have a Macbook circa November 2008 and a Netgear WNR854T Router.I try to connect to my wireless network but my Macbook won't do it. It will list my network in the network list and will connect to other unsecured networks but not to mine. I use WPA2 security on the network.Alternatively, my Macbook Air, Mac Mini, iPhone, iPod Touch, Blackberry, Xbox 360, PS3 and Wii have no problems connecting.
View 4 Replies View RelatedIn one location I my macbook pro will not connect to network vis wifi unless I click on the desired network. My preference is set to automatically join, but it does not seem to be working. It is wep pw protected by have provided the password. That is not the problem. As soon as I click on my connection it comes right on. But it will not join automatically.
View 1 Replies View RelatedI've recently upgrade to Mavericks and since then every time I restart the computer a new wifi network icon appears in the menu bar.
Is this a Mavericks related issue?
Info:
MacBook Air, OS X Mavericks (10.9.3)
Even though I have my router in preferred network list, my MBA still asks me to select a network to join. It says that none of my preferred network is in range, and only shows my router after I "refresh" the list by clicking on the airport icon. My UMBP connect to my network fine. Is there any way to also make my MBA connect to the network automatically?
View 1 Replies View RelatedFor the past few months I've been using my mid-2007 MacBook (running Snow Leopard) with a Samsung external TV/monitor (with the MacBook's lid closed). I had no problems whatsoever in terms of internet connection to my D-Link DIR-655 router. Yesterday for the first time since creating this setup, I took the MacBook with me somewhere. When I returned the MacBook to my network (closed lid, plugged my monitor back in), I started having WiFi trouble. The WiFi was initially running very slowly and then not at all. The WiFi icon on the menu bar was showing regular strength, however.
The complicating factor here is that when my MacBook is on, all other computers on the network show getting WiFi signals but the connection isn't working for them either. When I turned off my MacBook and powered down/up the modem and router, other computers could connect successfully. (But when I turned my MacBook on, the computers lost connectivity to the internet. I've already played with the router's channels without success. I also made sure there weren't any unnecessary items in my Mac's DNS listing.
I'm looking for a solution to my WiFi internet connection. I haven't used my MacBook Pro laptop in the last week or so - which means there is no way I have done any changes to the network configuration. However when I now try to connect to the internet via a Hub - which is previously set up on the macbook and worked no problem - is now not working at all.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
