Used to have no problem connecting my MacBook Air to my HP OfficeJet 7410 via wifi and printing things. Now, the printer utility seems to connect to the printer with the print job, but then it only downloads 50% of the job and freezes? It even starts printing that 50% of the job before the freeze. And then nothing.
Info:
MacBook Air (11-inch, Mid 2012), OS X Mountain Lion (10.8.3)
I just bought a HP OfficeJet 7500a (which does support duplex printing) and I am unable to do two-sided printing as the dropdown menu (located in layout in the print screen) is greyed-out. Do I require a driver or anything like that?Â
By the way I am running Mountain Lion Developer Preview if that matters.Â
Info:
Macbook Pro 13' Late 2010, Other OS, Mac OS X Lion (10.7)
I downloaded the latest drivers from the HP site. I can direct the printer to print a "test" page, and it prints out an Excel Spreadsheet without problems. However, it won't print a GMail email from Safari and it won't print an email from OSX Mail. It seems like it is going through the motions for over a minute then releases a blank page. And get this, the same GMail page that wouldn't print from my Gmail on Safari does print fast and easy from Firefox.
View 1 Replies View RelatedI recently bought a Hp OfficeJet pro 8600 plus printer and have set it up fine on my desktop pc. When I went to install it on my MacBook it wont let me set it wirelessly because it states that The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
Please make sure that:
- Your Mac is connected to a wired or wireless network that has access to your device.
- Your device is connected to the wireless network "home".
Click "Retry" to attempt to connect again using the current settings. Click "Go Back" to enter different settings. The weird part is that everything is set up fine as far as the printer it seems that the mac doesn't want to cooperate. I am running OS X Lion with the newest downloads and updated.
Info:
MacBook Pro (17-inch Mid 2010), Mac OS X (10.7.4)
I woke up to my MacBook fan going nuts. Had an error message on the screen that said something about a disk error. The machine wouldn't do anything (force quit, launch app) so I hard powered down. Now.....NOTHING. All I get is the white screen, followed by the flashing folder. Here is what I have tried so far.
I already booted from the restore cd that came with it and opened disk utility. The hard drive shows up as something like disk1 but not "Macintosh HD."Tried to repair permissions and got an error message. Thought then to do an archive and install......and the HDD isn't even a viable option to install the OS on.
I had the original (but smaller) HDD that came with my MacBook, so I put it back in and everything booted up just fine and is back up and running. (Thank God for MobleMe that had all my contacts, etc on it). But I still have some info on that other HDD that I need. I ordered a usb enclosure for the drive to maybe try some recovery, but it seems to me that the HDD failed or something. Is there anything else I can do?
I've got a four year old Macbook Pro 17", running 10.5.8 OSC, 2.33 ghz, 3gb 667 mhz ddr2 sdram.
The power cord was unplugged, although the battery was fully charged. I plugged in my Canon printer for the first time in over a year. It printed half a document, then the computer shut down. I pushed the power button and got the start up chord, but then it shut down again. Tried this a few times. Then I unplugged the printer and plugged in the power chord. it started, but it's very slow, and I keep getting the pinwheel.
I have been the proud owner of a Macbook Pro 2.5Ghz with 4GB RAM, running Leopard 10.5.6 for just under a year and I have never been able to get Time Machine to backup my files properly. Instead I have been backing up my really important files manually to an external NAS drive.
However, I would like to back up all files to an external USB drive using Time Machine. I have a Freecom USB2 drive which I purposely bought, but when I try to perform the initial back up I get a message telling me there isn't enough space.
My MacBook has a 250Gb HDD and my USB drive is 500Gb (465Gb available), so I have no idea why I am getting this message. I have ensured that no other devices are connected in case it was also trying to back up those (USB & NAS drive), but still get the same message. It says I need 698Gb of space to perform the full backup - where is it getting this from?!
Within the options it shows me a panel containing an entry 'Time Machine Backups' with a size of 154.4Mb, which I'm guessing is the directory that I am trying to save the backups to.
I'm probably doing something obviously stupid but would appreciate it if somebody could point it out for me.
Unable to complete backup. An error occurred while creating the backup folder.
I got this several times on my Time machine error messages in the past 2 weeks. Bought a new 1TB drive, initialized it and it worked successuflly for 2 days now back to the same problem.
Info:iMac, Mac OS X (10.7.3)
Unable to complete backup. An error occurred while copying files to the backup volume.
Info:MacBook, Mac OS X (10.5.8), External Harddrive
My iMac running OS 10.4.11 can't complete startup. It opens a couple of windows, then reverts to a blue screen, over and over, no matter what restart procedure I try, including the OS X installation disk.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.6.8)
I have to convert .mov to .wmv for and internet website. I got quick time pro 7 as I was sure I could convert the movie from this application but the strange thing is that it only converts 22sec of the movie - not the whole one - to .wmv. Does anyone know why this is happening? In addition I tried exporting the movie from Final Cut to a windows media player file - same thing happens - 22 sec of the movie get converted.
View 12 Replies View RelatedI have an Imac 24" and a Mybook external HDD. ever since Leopard came out Ive been doing backups with time machine, then one day I start time machine for my weekly backup and this message comes up: "Unable to complete backup. An error occurred while copying files to the backup volume." Now I notice that my external HDD was almost not spinning while time machine was trying to backup the status bar of time machine saying how much files need to be copied and the total amount of space needed was super slow and stoped at something like maybe 10 mb I started time machine again same message. I though maybe Mac OSX needed some permission repaires. So I did just that and after that did time machine again same problem. then I said to myself maybe my External HDD has problems so I even formated the HDD, then stated Time machine again this time it was running smoothly just like before I had the problem but the problem came back after 6 gig being copied out of the 25 gig needed to complete the backup process. Now hope I dont need a clean install of my Mac OSX or maybe its my external HDD. maybe my USB having problems?
View 7 Replies View RelatedYesterday I made a project with iMovie and started to import it as a QuickTime .mov file. I�ve set everything to the best quality and encoding, without compression. My HD had 101Gb free space. This morning there was an error warning that the project could not be completed because the HD was full. I checked and there's 0kb of free space! How do I fix it? Where do I look for files to delete? What shall I do?
View 13 Replies View RelatedI'm using Time Machine which makes periodic backups of my data to Time Capsule a couple times a day. If I had a problem with my computer would I be able to completely restore all of the data like the way it was?
View 3 Replies View RelatedI have used iDefrag many times and it worked perfectly but now it gets like halfway and says this "Defragmentation of the disk main has finished.NOTE: Some files were skipped due to lack of contiguous free space and therefore remain fragmented." anyone know what that means?
View 12 Replies View RelatedI can't seem to actually download anything or complete updates all of a sudden.
View 14 Replies View RelatedThis should be a relatively easy task, but the problem is when I try to empty the trash it tells me that a certain device is still running so it is unable to complete the operation. I can not seem to find said device on the computer anywhere and am not sure how to find it and stop it from running so I can complete the action.
Info:Mac mini, Mac OS X (10.7.3)
So i have been searching the Internet and forums to find someone with the same issue as myself. there are many that are close to it. though nothing that has helped me in this situation. so here i go posting a thread. My USB self powered HD was plugged in with data being accessed (Movie) when the cord got knocked out and unplugged the HD. This has happened before, though not when i was accessing the HD... usually this is fine.
Any way, i herd the HD struggle three time as if the needle jumped from the physical disk, it kinda sounded like it died. though when i plug it in now it sounds fine, the disk spins and receives power.
although the disk no longer mounts. though when i look it up under the Disk Utility it sees the drive and the fancy name i gave it (though it cant mount the drive) when I run verify and repair it gives me this message which is probably pretty standard:
Verrify and Repair "NCC-1701 D"
**/dev/disk2s1
**Phase 1 - Read FAT
Unable to read FAT (input/output error)
Error: The underlying task reported failure on exit
1 Non HFS volume checked
1 Volume could not be repaired because of an error.
boom nerdy music producer get stumped. got any tips? i have been trying to download some recovery software, though it more challenging to find them with out paying big dollar bills.
When I start typing a word, it tries to finish it for me (for example, if I want to just write the word "commit" it tries to sort of finish it for me by adding on "commit-ment" unless I press the Space bar-its sorta annoying-how can I change that?
View 1 Replies View RelatedI have an Imac 24" and a Mybook external HDD. Ever since Leopard came out Ive been doing backups with time machine, then ...one day..I start time machine for my weekly backup..and this message comes up: "Unable to complete backup. An error occurred while copying files to the backup volume."
Now I notice that my external HDD was almost not spinning while time machine was trying to backup ... the status bar of time machine saying how much files need to be copied and the total amount of space needed was super slow .... and stoped at something like maybe 10 mb ...
I started time machine again ... same message.
I though maybe Mac OSX needed some permission repaires. So I did just that and after that did time machine again ... same problem ....
Then I said to myself ... maybe my External HDD has problems ... so I even formated the HDD, then stated Time machine again ... this time it was running smoothly just like before I had the problem ... but the problem came back after 6 gig being copied out of the 25 gig needed to complete the backup process.
Now ... I hope I dont need a clean install of my Mac OSX ... or maybe its my external HDD ... maybe my USB having problems?
I've had my original MBP since 2007, which was originally on 10.4 I believe. I've done upgrades up to the current 10.7.4. My original MBP was encountering end-of-life hardware issues, so 3 months ago I purchased a new MBP. I used the Migration Assistant utility to move my files and user settings.My older MBP toward the end of its life was having OS shutdown / reboot problems. The OS would never completely shut down. It would go to a light gray screen, and the twirling icon in the middle never went away. A manual shut down from the power button was the only recourse. It seems that the issue is tied to issue(s) with my user account settings, since the problem is still present, despite newer hardware.I'm comfortable with reviewing my system.log in Console and issuing Terminal commands, if that will help with any troubleshooting.
Info:
iPhone 4S, Mac OS X (10.7.4), MBP, 2.4 GHz Intel Core i7
error msg: Unable to complete backup. An error occurred while creating the backup directory. - What can I do to fix this? I tried restarting.
Info:
Time Machine, Mac OS X (10.5.8)
been using my older MBP with windows 7 for a while and have never notice oddies with the battery until now. Then recently after replacing the failed HD and re-installing Snow Leopard on my 2007 MBP, the battery panel is telling me "Service Battery"; it's battery health according to coconutBattery is fair for it's age (50%).
the unit (battery) has been replaced previously due to being considered 'under performing'. Is Snow Leopard trying to encurate it's users to replace the battery more frequently? If not, does anyone know why this appears? I'm at lost, since it appears to work fine, if not charging completely.
So I finally got around to getting a 1tb drive to hook up to my airport extreme to do TM backups. I have ~420gb to backup on my mbp's hard drive. To avoid an absurdly long backup, I did the initial backup via usb (took the better part of the day).
Just now I was excited because it finished - I hooked the drive up to the extreme, mounted the drive so that it would show up as an option in the TM pref pane for a backup disk, and thought I was good to go. However, when I tried to get TM to do a backup so I could see it work (by selecting Back Up Now from the menubar), it took a ridiculously long time "preparing" and I saw that it was trying to create a whole new TM backup on the drive based on my computer's network name. It even had the audacity to think that the previous backup file was ~2gb, which freaked me out because I thought it had deleted it. But sure enough when I canceled the new backup and hooked it up to my mbp again, the backup was the correct size.
ok my macbook wont boot. i hit the power button, i hear the cd drive move, grey screen comes up with the apply logo and the little progress loading spinner thing, boot sound rings, then it goes to a dark blue screen for a second then it turns a lighter blue and the cursor is there and i can move it around, and then nothing happens it just sits there
i tried holding command/option/p/r till i heard the boot noise twice then let go and it stopped at the blue screen again. i didnt download anything new or change any permissions or system settings, just powered off last night and went to turn it on this morning and this happened
I have time machine running as well as Parallels installed. Every time Time Machine backs up it does a minimum of 18.4GB. I 100% do not have that many changes each hour. BTW, running Snow Leopard. I have a screen shot of all the items I have excluded, but it still is doing it.
I experienced what I believe was a crash so after various attempts at doing a time machine restore, I performed an erase of the HDD and have been trying to install snow leopard from a disk I bought from the Apple store. I am not sure if the disk is the whole OS X or not as it was purchased to upgrade from the OS X that was on the machine. I am hoping to do a time machine backup to get my old programmes/software back afterwards but in the meantime just cannot seem to get snow leopard on my iMac.
Info:iMac
I would like to keep using my HP K80 with the new Macbook pro I just purchased but not sure what the best connection might be or how to do it.
View 3 Replies View RelatedA friend recently downloaded 500 messages from her ISP to Mac Mail (4.4) The inbox says she has 500 messages but she can only see around 150 / 200. How can she see that complete list ? I'm trying to convince her to remove those messages off her ISP's server.
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
