When i start my macbook air, its suddenly came out a question mark with a folder ( seems that it doesn't recognise the hardisk). I try many time to restart and its the same. Then i try to restart using macbook air install disk and press C button to reinstall the leopard but when installation , it cant recognise my hardisk.
View 5 RepliesI have just acquired a second-hand iBook G3 (Mac OS X 10.3.9) and I can't connect to my BT HomeHub using the AirPort. I can connect using a cable and the previous owner had no problems with the AirPort. My PC is connected to the BT HomeHub fine.
The AirPort is on and I can see the correct BTHH network in the list. When I try to connect I get the error message "There was an error joining the AirPort network 'BTHomeHub etc." I know this is a common error message but I've been through lots of forums and haven't found any advice that has worked. I tried stuff like cleaning up the keychains and adding '$' to my password.
It could be a problem with my password, because I've tried the Admin password on the back of the hub, the Wireless key BT gave me on the 'Wireless Settings' card, and the password I use for wireless internet on my PC. Does anyone know which one ought to work?
When I go into the AirPort menu and click on Internet Connect, 'AirPort Power' is 'on', there is no signal, and it says 'Base Station ID: Not available'. Do I need to reset my Base Station?
If anyone can help I will be soooo grateful. Thanks.
**I'm a Mac newbie and I'm not a techie, so if you can help me, please be prepared to explain in detail**
I have just bought a new iMac. I also have an Ipad 3. I have an itunes account. I downloaded itunes on the iMac. Then I plugged in the Ipad and clicked authorise purchases. I stopped it from synching from this library which would have wiped out iPad. Now how do I sign in to my existing itunes account on my new iMac? it doesnt accept my Apple ID or password or even my birthday if I try verify?
Info:
iMac, Mac OS X (10.4.1)
I've been having problems with my iMac recently, more precisely with my DVD drive. I think it's a software problem, and no mechanical problem. Let me explain:
When I insert a DVD:
- it will sometimes work perfectly. I can read, burn or whatever I feel like…
- it will sometimes not work. I don't know why, but the drive gives a few try (mechanical noises), and than ejects the DVD. If I try a few more times to reinsert it, it will sometimes just keep the DVD and not eject it, without recognizing it. When I try to open the Disk Utility program, it will simply froze. Or it will open after 5 minutes, but the DVD player will not exist and not appear.
I need to restart the computer. Sometimes it will work after the restart. Sometimes not. It's really random, and I haven't found out on what it depends… Sometimes, when I reboot it because of a trapped-unrecognized DVD, the DVD player will not open. "Initialization error [-70012]"…
I've tried Option-Cmd-P-R at the Start, but it didn't help… I feel like there's something wrong with the software.
It's a 2 years old iMac, using Snow Leopard (Mac OS X 10.6.8).
I've tried looking on the net, but a lot of people are experiencing mechanical problems (it simply never works), which I think is not the case here (it does randomly work perfectly).
Info:
iMac (24-inch Early 2009), Mac OS X (10.6.8)
My mother's G5 iMac has just had its second HD failure. Its with Apple now for fixing and they said its down to the 'port at the back was blocked with dust'.
Is this common? Sounds a tad suspect me..
So I'm seriously enjoying my "new" BlackBook, but I'm having a bit of an issue. Sometimes after shutting it down, it doesn't want to start back up. I know that it's going to happen if I plug in the MagSafe connector and the light immediately turns bright green. The only way I've found to fix this is to take out the (non-functional) battery, let it sit for a minute or two, and then plug the connector back in. This always makes it work.
If the LED on the connector turns a very dark (or dim) green, and then turns bright green, I know it's going to work fine. I believe I've tried an SMC reset and it doesn't seem to work. Any ideas on what the issue could be? Since my battery doesn't work (and I'm suspecting that the faulty battery is part of the issue) I am often turning on and off the computer to move from one place to another. I'm getting a new battery soon, but I just don't have the funds for it right now.
My macbook pro early 2011 doesn't start. On start it stay only on grey screen for hours
Info:
Mac Pro, Mac OS X (10.6.8)
I can not start my macbook air because it doesnt allow me to put in full password. Just 4 digits. It worked few times when I was setting the system up but now it doesn't. What shall I do?
Info:
MacBook Air
i have a new mac air 11 inches and i tried to download my pictures using my usb mass storage device. how come my mac is not reading it?
View 2 Replies View Relatedwhy my Macbook Air will not recognise my wifi router when my MAcBook Pro and Iphone do immediately. I have switched airport on and off on my Macbook air repeatedly and it will not pick up the wifi that my Pro and Iphone immediately recognise and connect to. After 20 minutes or so of switching airport on and off, it found the router and I successfully connected. After use, I powered down the MAcbook air and crossed fingers that having connected once it would recognise the router again unfortunately not another frustrating 20 minutes of trying despite my other apple devices remaining connected.
Info:
MacBook Air, iOS 5.1
My friend's MacBook Air crashed. It blacked out, and turned off. Now, when he presses the power button, he gets a beep, and that's it. the white LED light also doesn't flash. It's a short, soft beep.
View 2 Replies View RelatedWhite screen on start up, doesn't boot.
Info:
MacBook Pro, Mac OS X (10.7.3)
have a early 2011 MBP running OSX Mavericks. I use my mac everyday both at home and school. This morning when I opened the mac, the screen was frozen. I simply restarted the mac, and it doesn't go beyond showing a prohibitory sign. I have tried many things..
1. Restarted the mac, while holding the Option key (selected Recovery HD), after waiting for nearly 10 mins, the system loaded into recovery disk ( but the twist was, in the disk utility, my SSD was not found/shown)
2. Then thought the SSD was dead.. So asked the IT guy to see if he can retrieve the data (removed SSD out of the mac and he used an external hard drive enclosure and the SSD was instantly recognized, saved the data). Here I did two things
A. First, asked my friend if I could mount his SSD in my Mac and see if the system starts. Even using a different SSD, my mac still showed the prohibitory sign.
B. Then l installed my SSD into his Mac.. System booted as normal (basically it was all there, but on his Mac)
3. So ruled out that my SSD was faulty. Then using the internet based Apple Hardware Test (AHT), I found no troubles with any of the mac components.
At this point, I don't understand what is causing my Mac not to go beyond the prohibitory sign? Could it be something as silly as the internal hard drive cable or something more complicated as the logic board? In which case, they should have been detected during the AHT?
Info:
MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.3)
This is a weird one.. My USB ports will only recognise USB2 devices now and only if they are powered (my back up drive for instance). I've talked to Apple who believe it's the motherboard but shouldn't the ports have failed completely if that's so? Machine is a Macbook Pro 15" Intel Core i5 2.4 GHz running Snow Leopard (tried Lion but lost too many good apps under that system). Also if I unmount my external back up drive, it's not recognised again unless I restart or interrupt power to the external USB 2 drive. Almost like the old serial devices!
Did a total erase and reinstall of Snow Leopard 10.6.8, tried a powered hub and Apple had me do all the usual key combo resets all to no avail so it looks like I'm going to need a muthaboard. It just nags me that it still sees USB 2 only. How can it fail just a bit and then stay that way??
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
My new MBP15 doesn't start when I push the power button.Nothing happen ...
View 1 Replies View RelatedMy macbook air 2013 doesn't start.black screen. It gives starting chime but then nothing.
Info:
OS X Yosemite (10.10.1)
My Late '11 15inch Macbook Pro went bonanas today. When it starts up there all these black horizontal lines running across the screen jiggering jabbering everywhere and I see three apple logos (due to GPU glitch I am guessing) after loading everything goes white and my laptop heats up and battery dies within like half an hour. I was bummed but then like after restarting a bunch of times and recharging my laptop it starting up normal again! I was super happy, but then it experienced the same crash next time the battery died. So, this has been going on and off;
Info:
MacBook Pro, Mac OS X (10.7.3)
My computer won't start, the monitor dosn't come on, and the sleep light blinks constantly.
Info:
MacBook
Pro, Mac OS X (10.6.8)
My MacBook was working fine until in the last few days it stopped recognising some clicks with the mouse, and sometimes the clicks got stuck so that whenever I tried to move the cursor, it recognised as if I was dragging things when I was no longer clicking. This gradually got worse until it completely stopped working..The mousepad works fine at moving the cursor but I can't click on anything. I've tried to use an external mouse and the same problem occurs.I've tried all the restarting, removing battery, starting on safemode, etc. tricks, and nothing seems to work.
View 1 Replies View RelatedWhen booting, after Login, finder is continously starting and quitting, never showing any desktop icons or sth. like that.
Issue appeared after installing new Safari Update. -> deleted hdd, overwritten with nulls -> recovered with time machine backup (i had serveral some small other issues, and thought it would be a good idea) (Tried two different backups, one even 2 months old, when this issue surely doesn't came up, but had the same problem) repaired permissions, repaired hdd without problems from leo dvd.
have recently acquired a Power Mac G4 using OSX which has a SCSI card installed in one of the PCI slots.
I have a very reliable Agfa scanner(Snapscan 310) which is over 10 years old but has always given me excellent quality and I'm reluctant to replace it. Even though I've re-installed the software from the original Agfa installation disk, every time I try to use the scanner through Adobe Photoshop in Classic mode, a message pops up asking me to turn on the scanner which of course it already is!!
After booting in safe mode, my MacBook Pro doesn't load the desktop/applications properly. Whenever I enter the password it asks me for the password again. Series of events: I connected external drives for the first time in Apple Bootcamp/Windows. They did not mount and Windows froze whenever I connected the drives. I tried it a few times, each time using the power button for turning the computer off. After a couple of trials the screen color was very weird (psychedelic) and I noticed that the computer had gotten hot (in Windows my fans don't work as they should) and I restarted the in OSX 10.4. The psychedelic colors were still present and the temperature reading was 71 degrees (smc control software). Searching forums in a panic that I might have fried my video card partially I found and followed a description on how to change the screen from "color" to "grey" under System Preferences>Universal access. This did not help as the psychedelic color/pixelness still persisted. Even worse, when I restarted the computer, the above mentioned problem occured (not getting the proper desktop, I can't run any application or shut the computer down, it always tries to reload the desktop after a couple of seconds). What I tried so far: -I resetted the PRAM using the Command, Option, P, and R keys and waiting for two additional startup sounds. Result: the psychedelic color is gone, it looks normal. But still cycles between grey and color during the desktop stall.-I repaired my startup disk with the OSX installation disk...no repairs were necessary -I repaired permissions with the installation disk...lots of repairs were made, but no success upon reboot -I started the computer in safe mode...result: I don't get past the password screen. As soon as I enter the password it asks me for it again.
View 8 Replies View RelatedI have set safari 5.0 to open when i turn my mac on which it does (kind of). The bar at the top says Safari but to get the main window open i have to go to File>New Window.
How do i get it just to open straight away.
If a want to download a file with safari or firefox on my macbook, then I have to click on the link with my "right mouse button" and click on "download linked file" to download the file.
Normally I had to click on the link and the download started automaticaly.
How can I change this again?
my DVD Player doesn't start anymore. Along with some other applications(iChat, iCal, Expose, Automator) it all of a sudden is only displayed with the default application icon - the thing with the ruler and the brush and stuff.
The other applications seem to work fine except of the wrong icon thing.
When I try to start my DVD Player a popup comes up that says in bold letters ?? and underneath that ??10.
After several years of working properly, my display suddenly doesn't recognize the mac when starting up. If I turn off the power strip, turn back on and restart, the computer it works fine.
Info:
Mac Pro (Early 2008), Mac OS X (10.5.8)
Has anyone had trouble with a Samsung ML1660 printer and OS Lion? Mine was working perfectly before the upgrade to Lion. i have downloaded new software but the MAc won't recognise it's there.
Info:
iMac, Mac OS X (10.7.3)
I have a problem...my 12" Powerbook G4 doesn't start up properly at the moment. I turn it on, I can hear the chime, and the screen goes grey but then does nothing...I've tried holding down C while starting up too, but still nothing happens, just the grey screen.
View 5 Replies View RelatedI have a 24 inch iMac which was virtually silent. Last week the hard drive started failing so Apple replaced it under my AppleCare warranty. The trouble is now I constantly hear the new hard drive reading data, even when I?m listening to music I can hear the hard drive in the background which is very annoying. I never heard any noise from the original hard drive. I did notice that the replacement drive is a Seagate unit where the original drive was a WD. I called Apple again and they want me to bring it into the Apple Store again. I just don?t want to be going back and forth with this thing and not have anything improve. Shouldn?t I get it back from repair exactly the same as it originally was? I wonder if I they can specify what brand hard drive Apple sends to the store.
View 1 Replies View Relatedi've upgraded my system to snow leopard last night.
I have been editing .mov files in Adobe Premiere.. and since i have upgraded to snow leopard it doesn't recognise the .mov files in premiere or quick time.. how can i solve this problem as my work meets its dead line in 3 hours!
