MacBook Air :: Can Windows Be Installed Without A Optical Drive
Feb 29, 2008if windows xp can be installed without optical drive. either fusion, parallel, or boot camp?
View 2 Repliesif windows xp can be installed without optical drive. either fusion, parallel, or boot camp?
View 2 RepliesI just installed a new optical drive in my MacBook pro (2007 model, I think), I followed step-by-step instructions, and it all seemed to go fine.
However, now my mac won't boot at all!
I switch it on, hear the optical drive make a noise, then it just stops and doesnt boot. The white led is slightly lit, but very, very dimly.
Info:
MacBook Pro, Mac OS X (10.6.5)
So, I have a 13" white MacBook that is about three years old. Recently, the Combo Drive stopped reading CD-Rs (possibly all discs in general, but I only ever use it to burn CDs, so I wouldn't have ever known), so I decided to try to install a new Super Drive myself.
Following a guide on [URL], I installed the new drive, but when I turned my computer back on, it was not recognizing the drive at all. System Profiler was saying "This system does not contain any ATA devices. If you have any ATA devices installed, check that they are connected and powered on." I was then able to reinstall my old Combo Drive, which my computer recognized immediately. Thinking that I may have just not connected something tightly the first time, I tried a second time. Same thing happened.
So, my question is, is there anything I may be missing or does this definitely mean the drive is defective? I just want to make sure I'm not sending back a functional drive before I go ahead and do so.
Installed a new 750GB drive into my MacBookPro 5.1 Couldn't get Winclone to make image so I was forced to start from scratch with a new XP installation.
My MBP is partitioned 25%Mac & 75%XP with bootcamp and I have the old drive in a enclosure connected with a firewire. So all of old files are on the external drive now.
After installing XP I have no internet connection, drivers etc... However if I boot up on the mac side everything works fine. (I cloned the mac os already with Carbon copy).
So can I just copy all my old drivers over to the new drive? If yes how and if no how do I get them installed on the new harddrive. The MBP came with everything preinstalled.
I have a mac pro with two optical drives, I have no problems ejecting both drives in osx.
Option+Eject works fine. What is the key combo in windows?
Everything I've tried just open/closes the bottom drive. I've tried numerous searches with no results
I'm trying to install Windows 7 on Macbook 2,1 but my superdrive is faulty.
[URL]
Anybody had been able to boot windows 7 using usb optical drive?
I have a MacbookPro6,2 (mid 2010). I replaced my optical drive with an OptiBay 500GB hard drive before I realized I wanted to do bootcamp. So, I did a lot of searching and found that I would be able to install windows 7 onto my bootcamp partition using Parallels 6 (from an image of the retail windows 7 disk). The install from parallels was successful so I used parallels to install the bootcamp drivers to the windows partition.
However, when I try to boot to the windows partition, it starts up, displays the 'starting windows' message w/ the windows icon then BAM--Blue Screen of Death flashes on for less than a second and the machine restarts. I can't even read what the error is, thats how quickly it restarts. I also searched the partition looking for the BSOD error log but no log was generated.
I tried to install Ubuntu 9.04 on 500 GB external drive and it will now no longer boot Ubuntu nor Mac. I need to know how to fix this. Things already tried:
*Backing up harddrive and installing Snow Leopard (10.5.4 is what it is)
*Deleting the external harddrive and reformatting it.
I want to be able to keep all my mac files. The file with a ? appears when the Ubuntu livecd is not in. (that is the only thing that boots).
I know this has been discussed before but I am completely confused. I've got some GPS maps that I want to load onto my system using the Windows side...but I want to put the maps onto my external hard drive. The hard drive has been formatted to mac
View 5 Replies View RelatedRunning a 2010 MBP Core i5 2.4GHz. I had Windows 7 originally installed. Gave me wireless problems and I gave up. Erased the partition. Installed Windows XP and everything was fine.
I got a new copy of W7 Professional x64. I installed it "over" the existing XP, though it erased the partition anyways (I don't care about that).The new 7 install has been giving me the same wireless problems. I downloaded and installed the Broadcom driver. Gave me a BSOD and restarted the computer. Now I have a BSOD on start up, too. On the OSX side of things, it no longer shows any Boot Camp hard drive. It doesn't recognize it at all. Though when I hold the option key on boot, it still shows the Windows install.
1. How do I fix the BSOD problem? (All caused by installing the driver)
2. Where the heck is the Boot Camp hard drive/partition?
My slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedSo I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
I have a MacbookPro. The factory fitted DVD/CD drive plays dvds fine but spits out CDs [even originals]. I have Windows XP installed via bootcamp which doesn't cause me any problems.
View 6 Replies View RelatedMy next Mac will be a laptop, and I will NEVER need the Macbook pro's power. I just web-surf and listen to music mostly. I only use the optical drive to watch dvds. But I have a separate player for my much larger TV now. So for say 99 percent of the time, an optical drive would be unnecessary. But I would buy apple's separate optical drive; which I think is a good idea. On my present computer, a first generation Mac Mini, the DVD drive is obviously obsolete now, especially when it comes to Blu-Ray. But what if a like in 2 years a new optical format comes out, or at least a much faster version? If I had a Macbook I would be stuck, never being able to upgrade the internal drive. If the Macbook's optical drive was easily upgradable, then this would be a no brainer.
View 5 Replies View RelatedSo I have a 2.2GHz SR MBP, and the superdrive just went out on me. It will read and write to CDs, but won't recognize any DVDs that I insert into it. I bought a USB enclosure and DVD drive, and it works fine to read and write to DVDs when in Snow Leopard, but I am unable to boot from it (specifically so I can install Windows 7, but I can't boot SL either). I reboot and and hold down option, and only see Macintosh HD, not the disk I'm trying to boot off. I've cloned SL to my flash drive and I can boot off that fine, but unfortunately I'm unable to do that with Windows...
Any ideas? I've googled it and it seems like booting off a USB optical drive is supported, so I'm unsure why it's not working for me...
I had a MBA. I needed more RAM, higher CPU and larger drive capacity. So I changed to MBP. What I dont need is the optical drive. Apple should ditch the optical drive in MBPs or at least have an option not having an optical. Instead more battery and 2 disk bays.
View 24 Replies View RelatedHow do I eject a CD that won't come out of the optical drive on a MacBook Pro . I have tried the ejcct key on the keyboard. There is no longer an eject disk on the drop down menus.
Info:
Mac OS X (10.7.3)
There is the hardware test, but it does not seem to include the Optical drive, I did the extended test and it says that everything is working fine, obviously it is not, everytime I insert a CD/DVD it plays it right, but it does not come out on its own and i have a hard time to get it out somehow, this happen exactly 1 week after the guarantee run out! I have a MacbookPro 15 inch 2.4GHZ, 2GB Ram 250 Hard Drive?
Info:
MacBook Pro, Mac OS X (10.6)
I have a time machine backup on external drive.
I would like to:
1. clean install Lion on the new SSD (120 GB)
2. restore apps from my backup on the SSD
3. keep only data on the existing HDD
My questions:
What is the best way to make it?
Can I just keep the existing system on my non-SSD HDD, and after having Lion on SSD keep just data and delete the system libraries? Or is it better to format the whole disk and restore data from time machine backup (so it is not fragmented..
Info:
MacBook
Pro, Mac OS X (10.7.3), MacBook Pro 2010
how do you replace the optical drive on a macbook?
View 1 Replies View Relatedsince 2 days my optical drive makes one very strange noise every time in "wake it up" or turn it on. The sound is done three times. I realized today that now I'm not able to put a disc into the drive, instead of "absorving" the disc, the drive expels it.
Info:
MacBook Pro, Mac OS X (10.7.2)
I want to keep the optical drive constantly spinning. I am running music for a dance recital, and all their music is on CDs and I would prefer not to rip it in. My problem is that for the rehearsals, every time they rehearse a new song, I have to wait minimum 10 seconds for the drive to spin up and load the song. Is there any way I can keep the drive spinning until im done with it? Or a way to temporarily load the CD into RAM?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), 2.2GHz i7, 8GB RAM
For example: to play The Sims 3... it requires a disc. Or watching a movie. Or importing music.
View 1 Replies View RelatedI'm going to purchase a Crucial M4 128GB SSD for my Late 2011 13" i7 Macbook Pro. I don't use my optical drive at all, so I figure I may as well swap that out for my current 750GB HDD, and put the SSD in the main harddrive bay. I know full well how to physically install the respective drives, but my confusion comes when cloning the current HD onto the SSD, then moving all your media files (music, movies, documents etc) over to the HD, while keeping your system files and applications on the SSD.
So what I really need, is a PROPER in depth guide from the start of the setup process (First boot after installation of physical drives) detailing how to copy my system files and applications over to the SSD so I can boot from it, while keeping my data & media files on the HD and being able to access them all as I normally would through finder.
Info:
MacBook Pro, Mac OS X (10.7.4)
I've installed a Crucial M4 256GB SSD into the traditional hard drive bay of my Mid 2009, Macbook Pro (5,4). I started getting beachballs immediately after the least bit of intensive CPU usage and pinpointed the problem to be the faulty EFI 1.7 firmware update. I then downgraded to EFI 1.6, and the beachballs ceased, but the problem now is that the Hard Drive controller now only allow for up to 1.5 GB/s interfaces. With that, I'm now only using 25% of the speed potential of my SSD, which is quite frankly a waste of money.
I'm thinking of installing an optibay, in place of the optical drive and installing the SSD there, leaving my original hard drive in the original hard drive bay. The problem is, I don't know if this alternative will be worthwhile, as I have no idea how fast the Optical Drive's GB/seconds are. how fast the optical drive connector's GB/seconds is? If it's anything faster than 1.5, I'm definitely purchasing an optical bay for my HD.
I am thinking of buying the new macbook pro with retina display.I do not intend to get and external optical drive.I want to split the hard disk and install a windows 7 ultimate, which I own and have as an CD image ( ISO file ).
how can I install windows from my ISO without burning it into a CD or creating an external drive? is it possible?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
I am about to install a new (blank) hard drive to my existing 2009 Mac Pro. The Drive will then be used solely for windows (won't be a partition, but a stand alone drive, separate from my other drives which are Raid).
On the apple web site, it says that the OSX software installed will provide drivers etc. Does that mean that I should:
1) connect the drive
2) format the drive under OSX
3) run the bootcamp assist...
My Macbook 1.83 GHz needs a replacement optical drive. Will the one from my iBook 800 MHz G4 work and fit in?
View 1 Replies View Related