MacBook Air :: External HD Not Working - OS X Yosemite (10.10.1)
Dec 7, 2014
After I updated my Macbook Air to Yosemite, my 2T Lacie Porche Design External HD kept ejecting after a minute or so after being plugged in. I tried all the troubleshooting there is to try in this site. I took my macbook to an Apple store with the HD and was told the HD was faulty. Then took the HD to Best Buy and GeekSquad said they tried it in many devices and said the HD had no issues. So yesterday (as of the day of this post) I did reset on my mac to factory settings. It reverted back to Mavericks. I plugged in the HD and voila! No issues. So I thought that erasing everything on the mac might have solved the issue. Once again updated to Yosemite and boom. HD ejected. What's the next step?
Info:
MacBook Air, OS X Yosemite (10.10.1)
View 1 Replies
ADVERTISEMENT
Dec 4, 2014
SInce downloading OS Yosemite, iCal on my Macbook doesn't work. All past events have been erased and I can't add new events. When I go into iCloud my calendar is fine and if add a new event to the calendar in my iPhone or iPad these will sync ok (although all past events prior to downloading Yosemite have also been erased on both devices).
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 6 Replies
View Related
Dec 6, 2014
Had the same issue with previous system 10.9. Question was answered and it solved the problem, only until I reboot the computer. Then problem appeared again.
Installed 10.10.1 Yosemite and again my camera is no longer operating. I tried the previous method and used Disk Utilities to repair the permissions but it still does not work.
Info:
MacBook (13-inch Mid 2010), OS X Yosemite (10.10.1)
View 1 Replies
View Related
Apr 11, 2010
I have tried a few thinsgs to try and get it to work including reseating the cables and that has not helped. As the title says, the back light works as i can see the screen getting blacker/greyer. Also the external output works as well. I'm not sure what to do at this point because I can't find information on an inverter board for the LCD, only the LED backlight think this could be an issue with the video card 8600M or is my LCD dead and I need a new one?
On a side note I have taken very good care of this computer, no drops, making sure the HDD is parked before moving, having it in a protective case, etc. The only difference is that I gave this to my sister to use and after a few days it died. (seems everything she gets that's electronic dies these days, meaning I probably shouldn't give her anything that has a circuit board in it....)
View 1 Replies
View Related
Dec 7, 2014
Yosemite software updated and Ios and icloud ID are all checked. I can receive calls but unable to make.
Info:
MacBook Air, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Dec 10, 2014
I'm using an Envision 17" LCD with a Mac Book Pro, also have an Apple DVI-VGA converter in the mix. I know this monitor works fine with this computer but suddenly, I'm getting no signal.
Power cycling the monitor doesn't work; unplugging/replugging the video cable doesn't work.
Rebooting works, but if I try to change the resolution, the monitor stops getting signal. I know the computer "knows" the correct rez, but doesn't always offer it. I suspect a corrupt software component...
This monitor/cable works just fine with my 2009 MPro
Info:
MacBook Pro, OS X Yosemite (10.10), 13", 8GB RAM
View 2 Replies
View Related
Dec 6, 2014
Ever since I updated to the OS X Yosemite update, my app store will not connect?? I open in and every thing is that gray colour that you can not click on?
Info:
app store
View 10 Replies
View Related
Dec 3, 2014
After upgrading to Yosemite my 3rd monitor does not work.
Info:
iMac (21.5-inch Mid 2011), OS X Mavericks (10.9.1)
View 2 Replies
View Related
Dec 5, 2014
I have a Canon LBP6000 laser printer. I downloaded the Yosemite driver from Canon after updating to Yosemite, and the printer worked up until a few days ago. Now, I can't print. The printer status monitor says "printing" with a status bar, but nothing happens.
I have tried remedies such as deleting all printer drivers, deleting the printer, resetting the printer system, restarting the computer, reinstalling the printer, resetting PRAM, updating to 10.10.1. Nothing has worked so far. It was working fine a few days ago!
I'm on a 2008 MacBook OS X 10.10.1.
Info:
Intel Core 2 Duo 2GHZ, Mac OS X (10.6.2), 2 GB RAM, 160 GB HDD, Superdrive, GeForce 9400 256MB VRAM
View 2 Replies
View Related
Dec 8, 2014
I set up Parental Control for one user to access ALL apps except one, but when the user logs in can't access anything at all. Sometimes receives messages "you're not allow... allow once, allow always" sort of thing. Then many other apps simply can't open.
Info:
MacBook Air, OS X Mavericks (10.9)
View 4 Replies
View Related
Nov 30, 2014
I have set up the shared printer on my iMac in my room. I am trying to print from my husbands iMac in the living room. It is acting like it is going to print but when I try to print the printer queue comes up and it pauses the print job. When I select resume it says "Printing- 1.6.2 is ready to print." then it pauses again.
I tried setting the printer up multiple times from the living room and when I do it says the address is "valid and complete host name or address" then when I'm done and click "Add" it tells me "Unable to verify the printer on your network." "Unable to connect to 'Mycomputer-name-example.local’ due to an error. Would you still like to create the printer?" cancel or continue.
Also I installed the printer software on both computers so that shouldn't be the issue.
Info:
iMac, OS X Yosemite (10.10.1), canon MP490 series printer
View 5 Replies
View Related
Dec 9, 2014
Incoming server is a Road Runner Pop server. Have unchecked the "automatically detect..." box under advanced but does not save password. Connection is fine. Continually get "log-in to this POP account failed. Verify that the username and password is correct."Yes, password is correct, but Mail will not hold it in settings.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Dec 12, 2014
Trying to update to Yosemite but the Get button is not responding. It stays grey and I don't get the green Install App.I'm trying to update from the last version of Snow Leopard.
View 12 Replies
View Related
Dec 1, 2014
Why is FaceTime not working since I upgraded to Yosemite 10.10.1?
Info:
MacBook Air, OS X Mountain Lion (10.8.3)
View 4 Replies
View Related
Dec 8, 2014
A few days ago my macbook pro stopped getting iMessages. Interestingly I still get SMS from all of my non-apple friends. I have checked to make sure everything looks right, logged into iCloud account, etc. Double checked on my iPhone as well. My iPad and iPhone still communicate with each other and receive all messages. Running most current OS on all three devices.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 5 Replies
View Related
Nov 30, 2014
I have a macbook pro 17" 2011 model and since upgrading to Yosemite I am now unable to load images to websites such as ebay. This is just one of the sites having the problem but other sites as well where you are required to click the "load image" button. It gives you the navigation to the folder where the images are and you can see them but they are unclickable. All images are jpeg images with .jpg extension. I've included the series needed to get to the folder and you will see in the last image, none of the items are selectable, even the .jpg files.
Whats the secret to getting this option back so I can upload images to websites?
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 2 Replies
View Related
Dec 5, 2014
So i wanted to send a 600MB file via mail drop, but when I dragged the file onto the mail window and hit send, instead of the window asking me if I wanted to send it via mail drop, it just started sending it. Now I have a slow connection and don't want to spend the next 90 minutes uploading something that cannot be downloaded, never mind clogging up my internet connection.
Incidentally, in trashing the uploading file in Mail's Outbox to stop it, I can see the upload still continues as my network stats show full upload speed. Had to restart.
Info:
MacBook Air, OS X Yosemite (10.10), 2.0 GHz i7, 8GB, 256GB SSD
View 5 Replies
View Related
Dec 3, 2014
I yesterday installed Yosemite and the previous version of Final Cut Pro does not work with it. When I try to install the latest version of Final Cut Pro from the purchased tab in the app store, I get the message: "Final Cut can't be installed on this computer because it requires at least 4 GB of memory". When I go to the storage tab in "About This Mac", it shows that I have 154.49 GB free of 319.21 GB.
Info:
iMac, OS X Yosemite (10.10.1)
View 10 Replies
View Related
Dec 1, 2014
I am receiving the following message when Itry to send an e-mail:
"Cannot send message using the server SMTP"
Info:
iMac, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Dec 6, 2014
Upgraded MacBook Pro to Yosemite and ever since I get repeated keychain prompts, even after entering my keychain password. I have not changed my password, so I need to know how to make this stop.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Nov 30, 2014
Since the installation of Yosemite, Mail context menus no longer work. Control-clicking on a hyperlink in a mail messages opens a context menu containing these items:
Selecting any of the first 3 has no effect. Just clicking on the hyperlink will switch to the browser (Safari) and open the link. Clicking on "Services" does display a list of Services, and "Open URL in Firefox" at least seems to work. However, "Open URLs in Safari Tabs" does not. This seems to indicate a possible disconnect between Mail and Safari in particular.
Operating EnvironmentMacBook Pro (Late 2011), Mac Pro (Late 2008)Yosemite (OS X 10.10.1)Mail (Version 8.1)Safari (Version 8.0)
Info:
MacBookPro, OS X Yosemite (10.10.1), Mail 8.1, Safari 8.0
View 1 Replies
View Related
Nov 30, 2014
getting junk mail filters to work?
Info:
OS X Yosemite (10.10.1)
View 5 Replies
View Related
Dec 12, 2014
So my paired Bluetooth PS3 controller just stopped connecting with my mid-2011 iMac today. It says it is connected in the drop-down Bluetooth menu, I can see the flashing red lights, but it no longer works with any of the games it did 1-2 days ago.
I did download USB Overdrive to use the PS3 controller plugged in (with Expendabros, which was crashing when I tried to use the controller wirelessly, a known bug) yesterday, and it worked with that. Anyway, I made sure Overdrive was not selected as active in System Preferences. I tried that little reset button on the controller itself. Charged it, of course (it was almost full anyway). Restarted my computer. Add resetting SMC and PRAM (the latter always makes me nervous, as it really screwed up my wifi settings once) to the list. I tried removing the device from the drop-down menu bar list and repairing, no luck. Is it odd that it is showing up in the drop-down list, but not in the list in Bluetooth System Preferences?
In addition, I looked at my System Profile, and the PS3 controller is listed as NOT paired...Lastly, I tried to find com.apple.Bluetooth.plist in "Preferences" under Library (to try deleting it), but I couldn't find it. I did find com.apple.I don't believe there were any OS updates recently that could have changed Bluetooth somehow.
Info:
iMac, OS X Mavericks (10.9.2), 2.7 GHz Intel Core i5
View 1 Replies
View Related
Dec 6, 2014
I recently installed OS X 10.7.5 and now my HP LaserJet 1320 no longer communicates with my computer. I've searched HP site (refers me to Apple for updates), installed all update from Apple, deleted and re-added the printer,
Info:
iMac, Mac OS X (10.7.5)
View 4 Replies
View Related
Dec 1, 2014
I am trying to get handoff/continuity to work with my Macbook Pro 15" Retina (Mid 2012--2.3Ghz--8G Ram--256GB SSD/Yosemite 10.10.1 ) and iPhone 6 (4.7" 128GB Space Gray/iOS 8.1.1) I said partly because browser continuity works with browsing but it does not work with everything else.
- When I open a webpage in IOS Safari, the left side of my MBPr's dock does show up that "continuity" icon Chrome/Safari and when I click on that, it does bring me to the webpage I am checking on my iPhone.
- When I open a webpage on my MBPr's Safari, a little Safari icon does show up on the downleft of my iPhone lock screen, I pull it up. It does bring me to the webpage I was checking on my MBRr What does not work with Handoff/continuity
- Mail (when I open Mail in MBPr, Mail doesn't show on the other device. Same applies to open Mail in iPhone)
- Messages (When I open Messages in MBPr, Messages doesn't show on the other device. Same applies to open Messages in iPhone)
- Incoming Call (When my iPhone have incoming call, doesn't have incoming call notification show on my MBPr screen)
What I tried/made sure
- Made sure both device have bluetooth turned on and both under the same WiFi network.
- Both MBPr and iPhone installed the lastest version OS and all patches available from app store.
- Both MBPr and iPhone signed in with the same iCloud ID
- Both MBPr and iPhone enabled Handoff.
- Uncheck "iPhone Celluar Call" in my MBPr's facetime
- Turn off and on Handoff/Suggest APPs in my iPhone
- Restart both MBPr and iPhone multiple times
- Cleared MBPr PRAM
- Verified and Repair disk permission in my MBPr
- Enabled Text Message Forwarding
- Able to see my iPhone's personal hotspot under MacOS Wifi pulldown menu.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
View 8 Replies
View Related
Dec 5, 2014
Mail not functioning after upgrading to Yosemite?
Info:
iMac (24-inch Early 2009), OS X Yosemite (10.10.1)
View 1 Replies
View Related
Dec 12, 2014
As soon as I enabled file vault my Mac became unusable, with the cursor being stuck on the loading icon. I left it like this for many hours thinking it was just the encryption process after coming back to my mac the next day it was still like this so I decided to shut it off. After shutting it off I tried turning it back on again. The apple logo appears with a loading bar at the bottom. It loads slowly before getting half way and stopping to show a black screen with a white circle and a line through it.
Info:
MacBook Pro with Retina display, iOS 8.1.2
View 3 Replies
View Related
Nov 30, 2014
Macbook Pro 15" Mid-2010, Mac OS 10.10.1; iPhone 4S, iOS 7.0.0, Messages
When I receive an iMessage on my iPhone, the message is successfully pushed to my Mac and I get a notification in Notification Center. That's fine. However, when I launch Messages either by clicking the notification when it appears or by opening the app, no conversations appear (window displays "no conversations selected") and after a while it just leaves me with a blank window and only minimize / fullscreen enabled. The majority of options on the dropdown menus are also greyed out.
Considering that the messages themselves are successfully getting pushed to my Mac, I don't think it's an account issue. It seems as though the app is getting hung up trying to load up my conversations.
I originally had this issue on 10.10.0 so I thought that it may have been a bug and updated to 10.10.1. It only started happening a few days ago, I've been running Mac OS 10.10.X since several days after launch with no issues.
Info:
MacBook Pro 15" Core i5
View 4 Replies
View Related
Dec 3, 2014
The messages app on my Mac would work great with iMessages and SMS working, then today I had to update my apple id for security reasons and since then the messages app doesn't send sms anymore. Ive tried signing out and back in with the new password, restarting my computer, and even a few things in the settings of my iPhone 6+ and nothing seems to work. Some of my contacts that I can not message are tagged in red when they where not before I updated my apple id password
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Dec 1, 2014
I use Preview to resize my photos depending on where I'm posting or sending to. Since I've downloaded Yosemite I will resize photo and it's not working. I have my photos in iCloud drive & am working between an iMac and a iMac Pro. I'm trying to resize to send out to have printed vs. at home printing. This problem has only happened since upgrading to Yosemite.
Info:
MacBook Pro (13-inch Mid 2012), OS X Yosemite (10.10.1), also using iMac 27"
View 1 Replies
View Related
