I got the SSD version and I started it up, everything went great. It was late because I got home late and I just updated the OS and apps while I browsed the web. Once the update was done I shut it down.
Next day I turn it on and its stuck on the startup screen.
the screen has about 6 stuck pixels! 2 are big and the others are quite small. The notebook is covered under AppleCare until 2011. So if i take it to the Apple reseller near me, will they repair it???(they helped me out with my Mac mini before)
View 10 Replies View RelatedMy MacBook pro is stuck on the start up screen with a circle with a diagonal line through it. I cannot get to the login screen. I tried the command+option+p+r immediately when turning on my computer but that did not work.
Info:
MacBook Pro, Mac OS X (10.7.3)
Whenever I on my MacBook it gives off this white screen as seen in the pic. I tried command+r and holding down the option key on startup but it still leads me to this white screen.
Info:
MacBook, Mac OS X (10.7.2)
My MacBook Pro gets stuck at startup, the screen goes white every time and even when i shut it it's still stuck white and the apple on the back stays lit.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.3)
So my girl friend was using my IBook G3 and shut it down normally she says. We then went to turn it on and we will hear the chime but then it will get stuck on that first gray screen, nothing else comes up, no spinning no nothing. Hard drive is not making any different noise, I just don't know whats up.
View 3 Replies View Relatedrecently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state.
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail.
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen.
Info:
MacBook, Mac OS X (10.7.3)
I have a 13" macbook pro, i was using it one night and was runnung ok until i come back to it the next morning.I opened the lid but the backlight didnt come on but could just see the screen so i re-started it by holding down the power button and then thats where it never worked again for me. I have followed some of the tips from some forums but i have no luck.i used another hdd for my mac to use on as its bigger GB than the original,ive been using that for 5 months with no problems, now my mac wont show any of the hdd's even the orginal one that wasnt formatted. Ive managed to format the original one but its not showing that one niether.the second hdd ive left with the snow lepard on it. Now with the other mac ive plugged them both in externally and shows up on desktop but still no luck on the mac thats down. Ive even tried with the installation cd that shows up on startup management but nothing eles.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.5.1)
Last two days, I notice that my MBP gets stuck at the white Apple startup screen until I reboot. I've also notice getting the beachball, even when using Firefox.
View 11 Replies View RelatedComputer begins start up, but screen is blue and white instead of usual backround. Get spinning mouse icon for awhile, then it stops.
Info:
iMac, iOS 4.3, fan runs a lot
I have a 2010 mac using OSX Yosemite update. It is sticking in the white apple start up screen for a long time. It boots to the password screen, I input password. It then locks up in the password screen. I have a logitech key board. I try holding the shift key at start up for safe mode nothing happens.
Info:
Mac mini, OS X Yosemite (10.10.1), Logitech keyboard
What o I do I have done command, option, p, r at start up etc. I will not go to the desktop.
Info:
iMac
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
View 6 Replies View RelatedMy iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View RelatedMy Powebook G4 12" (model A1010) during its start-up phase remains stuck on the "initial gray screen" without displaying the apple logo. However, I can access the system through the console provided by Open Firmware.
I would like to ask you what could be the problem and where such problem may reside (hard drives, memory, main board, etc).
I'm using Onyx every so often when things start to get sluggish. Recently, things keep flying out of whack for no obvious reason. Like, USB ports stop working, or icons won't load. When I run Onyx, it tells me that the startup volume needs repair. I'll put in the Snow Leopard disk, repair the startup volume and return to Onyx, which then says everything is fine and goes about its business. Then, after not too long, things fly out of whack again and I'll need to repair the startup volume again.
What causes the startup volume to need repair? Is there some way I can avoid this kind of thing? Is there something I'm doing that's making this happen?
This would be an obnoxious problem to try and recreate for the Apple store people. Taking it in there, they'll probably just repair the startup volume and send me on my way.
My 13" 2009 MacBook Pro is shutting off after startup. It starts up fine, then I go to use it, and within about 10 seconds it goes into sleep. The sleep light goes solid, then after about 20 seconds it begins to pulsate. I could not wake it.
View 5 Replies View RelatedMy friends alu intel imac is having a problem. When he power on the machine the computer gets stuck on a blue screen.
View 21 Replies View Relatedjust came home from Apple Store today with new computer and superdrive, which is not showing up when plugged in. When I put a CD in it reads it for a few seconds then spits it out. I am on the road so getting to an Apple Store will not be easy for the next week.
Info:
MacBook Air (11-inch, Mid 2012), Mac OS X (10.7.4)
There's a flashing folder at startup and won't boot. I've tried the disk utility on the install cd but it cannot be repaired. It repaired it once, but when restarted it happened again. Ive also tried to reset the pram (not ire if thats what its called) and tried recovery hd, but those didnt work either. I want to backup my files, mainly pictures, but don't know how or if it's even possible through disc utility.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.4)
So my MBP was really making horrible clicking noise and I figured out that my start up Lion OSX disk partition is corrupted. I have three partitions. One for Lion OS X, another for Documents and another for Movies and Downloads. When I run disk utility and verify other two partitions(documents and movies/downloads), they appear to be okay but when I do the same with Lion OS X then it says:
The volume Lion OS X was found corrupt and needs to be repaired.Error: This disk needs to be repaired....then use Disk Utility to repair this disk. Is my hard drive gonna die soon? Or will it be okay if I just format my 500gb hard drive completely and install the fresh copy of Lion OS X again? I don't have a recovery disc or what so ever provided by Apple anymore. I have a DMG installation file of Lion OS X and a USB flash drive(4 GB approx). How can I repair the disk partition without the recovery start up disc?
Info:
MacBook Pro, Mac OS X (10.7.2), 2009 17 inches
I have a Macbook pro 2009 (2,26Ghz, 160 GB HDD, all Apple original parts) which is only a few months old. It has never failed me and I love it. Until now. I usually just put it to sleep when I am done with it but yesterday I turned it off. Now this morning when I press the power button the mac booting up sound beeps and everything seems normal. The White screen with the apple logo comes on and it starts working. After that however a blue background appears and that "clock"-wheel-thing that spins comes up, then it goes away, then it comes back and spins some more, then it goes away and so on. Nothing else happens.
I tried turning it off and botting up again a few times but the same thing happens every time. I put in the installation-cd (Leopard) and held down c while I booted up, this seemed to be working at first, the installation menus came up and I chose that option that re-installs OSX while keeping the files on the hard drive. After a few minutes into the installation however I got a message that said (rough translation). "The installation failed. Mac OS X could not be installed on your computer. The installation could not install certain files on "/Volumes/MacintoshHD". What does this mean? Has my harddrive failed or what seems to be the problem?
My mac is stuck on the startup page. I have tried fxing it with starting it with the install disk and ive verified the disk, it says everything appears to be ok something volume appears to be ok. And then I ran disk repair and it says everything is ok. However it still does not start up. t is tuck with the grey apple and the little spinny wheel thing. And in the utilities from the install disk startup it said that S.M.A.R.T. was verified.. idk what that means bu i heard it was good.
Info:
MacBook Pro (13-inch Mid 2009)
My brother's iBook G4 (I think it's a 2003 model) has a problem with the screen. When the computer is turned on, the screen stays black, although the backlight is on (the apple glows). Sometimes, on start up, the screen works normally for a random amount of time before going fuzzy and then black again.
Any ideas on how to fix this? Is it likely to be a problem with the hardware in the actual computer, or just the screen? Or is it a software thing?
I have Onyx and I did the usual diagnostic. It then says that "startup volume needs to be repaired" and that I need to boot into my Mac Os X install DVD and go to Disk Utility. I put in the DVD, press restart, and hold C. While my mac is rebooting it ejects the disk and takes me back to my normal desktop. What did I do wrong? Or what can I do to fix it?
View 1 Replies View RelatedI just bought a brand new Nvidia Macbook White from Amazon. Love it so far. One problem,and I will post a pic, there is a small nick on the top left corner of the casing of the screen. Its noticeable but otherwise the computer is great,no keyboard flex that I can see or any other cosmetic issues. Would it be worth it to go through the whole Amazon exchange for just this issue with no guarantee that the replacement would be any better?
View 24 Replies View RelatedI have an old "vintage" Macbook with Tiger as my OS. I have all sorts of sleep issues with it, and recently after accidentally hitting the sleep button, I had to force quit the machine by holding down the power button because it was just (beachball) spinning when I tried to start it up again.
I went to start it up and I get the gray screen with the apple on it and the spinning "clock hands" this goes on until I get a darker screen without apple and more spinning. It stays there. We've tried a host of solutions including the resetting through battery removal, we've tried to "archive and reinstall", etc.
Info:
MacBook
When i started it on i saw that even after two or three minutes it didnt started. i am still stuck at the apple logo on startup.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
6 month old MBP 15", been running 100% fine, plugged it into a projector the other day and it auto changed the screen resolution. I unplugged the device, went into settings and changed my screen resolution back to it's factory size as well as command & the minus key to make sure I wasn't zoomed in on anything.
I then did a system update for the following; Airport utility, Safari, Ricoh Printer, Digital Camera Raw, java, Itunes.
Restarted the computer as the updates had finished, then when turning back on the loading screen with the grey background, apple symbol and rotating loading symbol was zoomed in as much as the resolution would allow. So i restarted a couple more times, still the same thing - every time i turn the computer on the loading screen is massivly zoomed in, once it's done loading and moves to the log in screen it is fine.
I've tried plugging into the projecter again and editing my settings, that did nothing. It's like because i updated while the settings where wonky it's saved it somehow?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Only on loading screen!
My little brother threw a toy at my macbook and cracked the screen. Was wondering if any of yall knew a good place to have this repaired.
View 18 Replies View Related