my windows side of my macbook pro 2.4 GHz, Intel core 2 duo, 3 gigs ram ddr2sd, now enjoys freezing at start up. Some sites have mentioned that it is an issue of software incompatibility in drivers, some have said that my windows system files are corrupt, and others just say give up and rejoin the partition, erase old data and start anew. I would have liked to avoid the last one but it got the point where nothing worked.So! I have tried booting in safe mode, (to maybe run checkdisk etc) I got onto desktop to choose yes/no for system restore and then it would randomly freeze and cause me to have to turn the power off manually. Safemode now freezes when loading mup.sys
I have a mac pro running leopard (purchased in 2/08) and it was running beautifully for almost 2 months with no hangs, crashes or freezes. Then, for some reason, today when I turned it on, it would not boot. It would get to the apple logo, then just sit there for a few minutes, then reboot itself and the same thing would happen.
I pulled out the ethernet cable, unplugged all usb except keyboard/mouse and it would then (sometimes) boot into the system, log me in and present me with the UI. I then quickly performed a soft reboot and it would get to the desktop. However, I can only use it for anywhere from 30 seconds to 5 minutes before it would completely lockup. The clock freezes, the mouse freezes and it just sits there forever. I have tried booting into Vista (BootCamp) and it also freezes before startup is complete....................
Several times in the last few days the startup page has frozen. Following the instructions in the little instruction book I power down by holding the power button, wait a few seconds, then power back up while holding down the option key, and with all peripherals disconnected. I get a screen with two icons, "Macintosh HD" and "Recovery HD". The instructions say, "click the internal flash drive icon." Assuming that means the "Macintosh HD" icon, I click on that. That brings up a new startup page. Usually that is not frozen and I can sign in. Occasionally this second startup page is frozen too, so I repeat the power+option powerup. Whenever I have to resort to the second try I get an unfrozen startup page.
Once signed in I go to System Preferences and click on Startup Disk. Always after a frozen startup page I find this preference unlocked and the "Macintosh HD OS X 10.7.3" highlighted. I click on the icon, lock the preference again, and all works fine for the next one or two startups, then I get the frozen startup page again. One time on the power+option powerup I clicked on the "Recovery HD" icon rather that the "Macintosh HD" icon. All I got then was the blank Apple logo page with the revolving gear going on interminably. After several minutes I gave up on seeing what that would produce.
my computer likes to freeze during startup (at the apple logo, the loading wheel sometimes stops without warning). Secondly, when I tried to use my DVD drive today, at least one DVD and one CD were ejected. The one CD I tried made a clicking sound prior to ejecting. The 2nd DVD took a long time to load, and the 3rd one loaded without fail. Could this issue be related to the DVDs specifically, or is that the drive beginning to fail? I tried running the Apple Hardware Test while I was at home, but it stated that everything worked fine…I can diagnose my computer before I go to the genius bar, I just don’t want to have my laptop overheat [Emeryville and Berkeley never have availability anymore, so, when I get home for break, I’m going to take it to a store with availability..The last laptop I had (mid 2004 iBook) had a fan issue, which causes it to overheat, and shutdown unexpectedly. It still barely even works, but something caused some major screen damage to it as well.
My Macbook has started to freeze up constantly after startup, applications are non-responsive. I can still move the mouse around the screen when this happens but the pointer soon turns into the beach-ball icon and after 5 minutes things go back to normal but only for a minute or two before everything starts freezing up again. There is a clicking noise coming from inside the mac whenever this happens.I have run a virus check which reported no infections and i have uninstalled all programs installed since the problem occurred but to no avail.
I have a 2007 MacBookPro. shortly after installing Lion 10.7.3 and VectorWorks 2011 I started getting vertical blue and black lines across my screen on startup. They remain with in the apple while the computer boots and the everything freezes. I tried all of the usual fixes, recovery, safe boot, reset PRAM, battery, etc.When I tried to boot of a system disc I get a message sating that I need to restart my computer. Upon restart same problem occurs. 2 months ago I took the whole thing apart and cleaned out the guts. Reconnecting all cables back together, I came across, what I think is the camera cable. Since my camera has been erratic, i decided to test the problem with it connected and then disconnected. Connected same problem. Once i unplugged the camera everything went back to normal, until now. The same problem returned. I cleaned out the guts again. This time I unplugged the hard drive to try and boot off the C drive, but still get the same problem. This morning It decided to boot up. I was able to copy my essential files onto an external drive.
I do not have ubuntu, but I have seen people talking about booting with and customizing rEFIt here, and this seems like a knowledgeable place to seek advice. So here's my problem: I have a macbook pro on which I have OSX 10.5.8 and Windows7 x64 (installed through bootcamp 3.1). I downloaded rEFIt and tried to modify the rEFIt interface following the instructions here: [URL] After trying to change the background (hostname.bmg) to a different image rEFIt opened to show the new background (.bmg file) but nothing else (no mac or windows logos like previously) so I can't select an OS to boot to!!
I can still hold down the option key during startup to bring up the regular bootcamp menu which allows me to choose between my bootcamp partition (with windows 7) and what is now called the rEFIt partition (previously called Macintosh HD before I installed rEFIt) So I CAN boot to windows, but cannot boot into OSX without going through rEFIt, which is not showing me any options to choose from. The modifications I made to rEFIt were through the rEFIt.const file in the rEFIt folder in the efi folder on my Mac partition. This const file now reads:
I can see and read my mac partition in windows, but cannot save to it to reverse these changes I made to the .const file. I was also hoping that the timeout in rEFIt would automatically talk me into OSX even though I cannot see any icons, but after 5+ minutes waiting on rEFIt nothing happens. Also, I made sure not to list badges under hideui so they should still be shown...........
I just bought a new MBP and install Vista on it. It's horrible, the trackpad is simply not usable, this problem can be solved by using wireless mouse. The audio pops noise every 30 secs, turning wireless off or use Vista Anti Lag will solve it. Now the most annoying part, the computer hard freezes about twice day, this is unacceptable, I have not seen a computer hard freeze for many years. I meant blue screen of death is kinda okay, but my computer just freeze Ctrl Alt Fn Del won't work, tried re installing, no luck. Anyone had their computer crash with the new MBP?
When i play battlefield 3 in WINDOWS 7 on my brand new iMac 27" i 7, after some time the computer gets EXTREMLY hot and graphics start to freeze. Im 100% sure its the graphic card/ processor who gets to warm. It sounds like the fans runs on full power to. (it only happens in windows)
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I've used the bootcamp assistant to create a 200 GB partition for Windows. I installled windows 7 x64 on this partition, everything is going well so far. I'm able to press the option key after installation and run windows and perform some updates (note, I couldn't install the required software IN windows from the snow leopard disk, let's hope this is not the source of my problem).
Everything went well so I booted back to OSX and I noticed that I needed some more partitions, so I've split my Macintosh HD further into a Media and a School partition. I didn't touch the windows partition though.
After experiencing (before) with hackintosh computers I know that i have to rewrite the boot configuration of the harddrive. Because now I'm not seeing the Windows HD anymore while holding the option key at startup and therefore unable to boot into Windows anymore. Even parallels can't discover the Windows partition.
I've tried repairing permissions, and nothing. I've tried to use the repair option on the Windows 7 disk which states it can't be done.
What can I do? Do I have to repartition it again in an different order (bootcamp states that it can only create a Windows partition if there's only 1 partition in the harddrive, so it's logical to repartition the drive after bootcamp created the Windows HD or even after the installation of Windows itself). Perhaps I need to rewrite the boot config of the mac, which I don't have a clue about.
Being 64 bit windows is not an issue, because it worked at first (before repartitioning)
iTunes froze up yesterday while I was running vmware fusion (on my bootcamp partition) and now when I try to start vmware I get the following error:
Cannot open the disk '/Users/neil/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.%
"Provides support for switching between Mac OS X and Windows has encountered a problem and needs to close. We are sorry for the inconvenience."
I get this error every time i start up windows xp in bootcamp.
I was told windows works seamlessly with the new mac pro. Getting this mac pro is proving to be a whole lot of hassle. I've spent the last week and a day full-time trying to sort out these errors. Getting bit sick and tired and frankly, running out of time!
How can I start up mac OS before I have to log into a windows...the problem is my windows os activation has expire and I cannot get into it. I have tried holding shift key after I press power button but nothing is happening. It is always trying get me to windows. I don't have installation cd's and internet connections.
I have an old dell computer...about three years. And recently (like a few months ago) it kinda died. When I boot it up it comes up with the "DELL" loading screen, except this time it has about a dozen green lines going down the screen. And then after that screen the computer just dies. I think my only choice is a complete wipe of the drive since I can't even get into bios or anything but thought I might post here first.
I am new to this mac community.. And just received my 27" i5.
I am trying to install Windows 7 via bootcamp. I opened Bootcamp Assistant, and when i click continue, i get this popup.
"The startup disk cannot be partitioned or restored to a single partition" The startup disk must be formatted as a single mac OS Extented volume or already partitioned by boot camp assistant for installing windows.
I click OK.. And same message reappears
I cannot go ahead.
I have my 1 TB Disk partitioned as follows
500GB for Mac - Which is Mac os Extended (Journaled)
408 GB for Movies - Which is Mac os Extended (Journaled)
91 GB for Windows - Which is Mac os Extended (Journaled)
I got a CHKDSK check at startup of Windows 7 Pro and it's awfully slow on my MBP! 12 hours and it's halfway there! Have you guys encounter similar issue with CHKDSK?
I have a 3 year old MacBook Pro, so I decided to experiment with Bootcamp. I changed it completly to Windows. Happily it worked, however there doesn't seem to be a way to mute the startup sound. I've searched the internet for answers but the problem is, but all the advice I find tells me either to mute the computer before turning it off (which unfortunately doesn't work), plugging in headphones (also didn't work), or downloading a mac application which I obviously can't as I'm in windows.
Whenever I try to load up boot camp, so that I can do basic functions, like change the brightness/volume, AND RIGHT CLICK (which is vital for gaming in tight spaces like I so often enjoy doing), it immediately closes, with Windows giving me the error that is shown in the photograph that I have provided.
I got a bit of an annoying issue with VMWare 3.1. Every time I launch the program it automatically launches the virtual machine I set up. It is annoying because sometimes I launch it on accident and then I have to wait for the VM to fully power up and then shut it down. I am also thinking it would be annoying in the future once I install a few more OS's on there (I assume it might start the first one on the list automatically which might not be the one I want to use).
How can I get it to go into the menu of the program and let me pick which VM I want to launch (if any at all)?
I have looked everywhere in preferences and I did not see any settings for this.
I believe the Macs at my college allow the user to select from either Mac OSX or Windows at startup. However, it's a little different than holding down the option key at startup. I think it shows both at startup by default and if none is chosen, Mac will boot automatically within a couple of seconds.
Whenever I hold Alt at startup and then select Windows the computer seems to freeze for about a minute and then starts loading windows. While it is frozen I can't move the mouse cursor and nothing seems to be happening.
Is there anyway to make it always boot to the startup manager. Then maybe after 30 seconds or so it would default to os x. I'm constantly having to switch between OS's and it would be nice if I could make it so that it would auto pop up startup manager rather an me have to hold down the option key every time.
I just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
I've been trying to install Windows 7 64 bit on my girlfriend's computer, it's a 13" MBP, 4 GB, 2.4 GHz (mid-2010, 4 weeks old). I got through the installation without a hitch, got to the desktop, installed the Snow Leopard drivers, restarted... and then it froze after I typed in the password (the cursor circle froze, keyboard-trackpad unresponsive). I cleared the Bootcamp partition in OSX, repartitioned, and reinstalled again - this time without a password. It got to the desktop, and then after a few seconds the keyboard and trackpad became unresponsive again. This happens only when I install the SL drivers, upon restart. Now, I've tried reinstalling W7 a few times. I reformatted the whole disc, reinstalled SL... and still the same problem. I'm using a Windows 7 ISO from my university, the same ISO/Disc that I used to successfully install Windows 7 on my MBP.
I have since downloaded it twice, and burned the ISO three separate times, at 2.4x using Disc Utility. I've seen two similar instances discussed on other threads, but they were either adjacent to the main thread discussion (and unresolved), or just unresolved. In the installations that I've run since the initial few, I have run into issues that seem common (stalling when copying system files, etc.) I have since reformatted the whole disc, and those problems haven't arisen since. Also, I have successfully installed Windows XP from a university ISO on her computer. But she really needs Windows 7 64 bit... sorry for the long post, trying to be detailed. I updated SL before partitioning, and it's Bootcamp 3.1 (build 2328)
