I have been searching the forums for information on this, but have only found incomplete leads.
How can I get Digital Audio out of my G4 mini? Has anyone done that?
I am trying to integrate the mini into my home theater, and would like to get 5.1 sound out of that for my DVDs, Rips, etc.... and also pipe my music over a digital cable.
I know the Mini's audio jack doubles as a Digital out, and I could get that to pipe audio into my receiver's toshlink jack, but I cannot find any cables that would provide a digital 8mm jack in one end and a toshlink or coax jack on the other..... any ideas?
Alternatively, are there any USB or Firewire sound cards that could help me. I found one by Griffin, but that is meant to connect to 5.1 PC speakers, and does not give a digital toshlink or coax output. Are there any out there that I could use to do this??
I just took possession of a C2D Mini. I am unable to get digital audio to work so far. I use the same cable and receiver connections that I use on my 2009 Mini so I know they're good, but nothing. When I plug the cable in, it mutes the internal speaker, so it's detecting the audio cable. System Prefs > Audio shows digital audio, and won't let me adjust volume as I'd expect. I've tried a shared iTunes library as well as web based audio, but no luck.
Connections: DVI-HDMI converter out to a 32" 1080p Sony TV. Digital audio with mini-toslink to receiver. Power, LAN, Apple Keyboard. Nothing else hooked up yet. Running 10.5.8.
I have the latest and greatest Mac Mini. 2.26 with 4 g of ram. I update to Snow Leopard, and now it will not recognize that it has Digital Audio Output via a mini to a Toslink connection. Heck. I am running it through a Classe' Processor with B&W 804s Speakers and it previously worked with the previous Leopard.
I just picked up a new 1.83 core 2 duo at a price I couldn't pass up. I am going to use it as a HTPC so I have my hdmi cable, etc. All hooked up and ready to go. Last bit is the audio but I am having a bit of trouble. I bought a standard miniplug cable and assumed it would plug in just like my macbook. The problem is that the miniplug doesn't fit in the jack on the mini. I understand that the jack on the mini is a combo analog/optical jack but as you see below, it seems as though a standard miniplug y cable should work.
From the Apple support website: The headphone / line output jack accommodates digital optical audio output, analog audio output with a 24-bit, 44.1-192 kHz D/A converter, digital audio output up to 24-bit stereo and 44.1-192 kHz sampling rate and supporting encoded digital audio output (AC3 and DTS). For analog headphone / line output a standard audio cable with 3.5mm metal plug should be used.
For digital audio, a standard toslink cable with a toslink mini-plug adapter can be used.I have done my research and some reading and can go out and buy an optical cable plus a miniplug/optical adapter but would rather go the analog route (I understand the quality difference) because I already have the cables and don't have a receiver or speakers, just my tv speakers.
I have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
With a sharp fingernail I seem to have damages the internal ribbon cable that connects the audio card in my 2009 Mac Mini, and am looking to source a replacement, preferably in the EU. I'm currently in the UK.The part number is 922-8809.
A Google search reveals a few parts suppliers in Europeland, but they are all charging silly prices for the cable, and US suppliers impose ridiculously high postage charges.
I have the 2009 Mac Mini and was wondering if the mini display port has audio output. Does anyone know? I just want to minimize the amount of cables going to my tv.
I have an '09 mini that I think I'm looking at replacing with the new '10 mini server, but I have an audio question...
I currently use the digital output of my mini to feed my amp for my HTPC setup. I also have an Airport Express that I stream audio to for my zone 2 audio on my amp (it has to be analog on zone 2).
Well my airport express recent died and killed my zone 2 music.
My question is... can I stream the audio out of the mini in iTunes and control where it goes? I'm assuming that I can plug a stereo jack in the head phone jack on the mini, but will be live along with the HDMI port? I do most of this audio management via the iPhone remote.
I want to hook my Macbook Pro up to a Sony Bravia (not sure of the exact model). I went to the Apple Store, and was given these two items to hook it up. Moshi Mini DP to HDMI Adapter with Audio Support. Belkin High Speed HDMI Cable - 6 feet
We successfully hooked it up last night, and the video worked. I was told in the store that this setup would not transfer audio, so I already knew there would not be sound coming from the TV, rather from the Macbook instead. My Q is: What's the easiest way to get audio to come from the TV? I'd rather not buy external speakers to plug in, if I can help it.
I have attached my Mac mini to my Sony TV (to use as a moniter) - there hasn't been any trouble with the picture but I cannot get any sound.
I am using a VGA (I know that doesn't send audio over) plugged into the 'PC In' port at the back of my tv, and I am using an audio cable with a normal headphone-type jack on one end (going into the headphone port on the back of my mac mini) and the red/white cable going into the HDMI-in red/white ports on the back of my tv. I can't figure out what is going on - I tried plugging the red/white cables into all the input ports on the back of my tv, just in case, but no luck.
I've read several threads where people have been having trouble with this, but nothing has been resolved so far? I've got a 2ghz core duo mac mini running OS 10.6.4. I used to be able to stream digital output from it, but I cant anymore & it's driving me around the bend. I have tried new cables, different combinations of sources of audio, cables, inputs on my AV receiver and everything is in good working order apart from the digital out on my mac.
It will play analogue stereo fine, it will play from the built-in speakers, but it will not play the optical digital stream. As I said before, it used to do this fine, until one day it just stopped working, it kind of 'faded out' and never came back. The light still shines when the toslink cable is plugged in and the output switches to digital in system prefs, but nothing is being received by the AV receiver.
With the new Mac Mini models, you can have audio out via HDMI or the line out. I am thinking to hook the mini up to an LCD TV/monitor via HDMI (sound on the monitor) and also to my other TV/sound system via the mini DP and audio out.
I assume when the mini turns on it'll activate both displays (if they are turned on), and from what I understand you can have two displays running. I'd only want one at a time so I'd have the other display switched off. But can the mini output audio to either both, or whichever system I am using? I've read a lot of posts but can't find a definite answer. I only want audio (and video for that matter, but can turn off other screen) to one TV at a time, but do I have to go into the OS audio settings each time I want to swap between the two?
I'm also thinking of using Plex and keeping it open at all times, just sleeping the mini when not in use. Can the mini only output to one source, requiring manual switching to the other (i.e. going from HDMI to audio out)?
I finally upgraded from my 15" PowerBook 1.67 to the new 13" MacBook Pro 2.66. On the PowerBook I would usually run an external display using a single link DVI cable. I have read about the issues with the apple mini display adapters not working on DVI-I or non fully digital displays, but since I had been running the external via single link DVI (digital correct?) I figured that I wouldn't run into any problems. I did some troubleshooting with what I had and plugged my computer into my TV through the mini display adapter to a single link DVI to HDMI cable and all worked fine. Do you think that a dual link DVI cable could solve the problem connecting to my monitor? Or is my monitor flat out incabable? Third party adapter? Worst case I could just go VGA, though I don't want to. My monitor is a Sceptre x20.
I have an Early 2009 Mac Mini with Mini DVI and Mini DisplayPort. And I have two 1080p HDTVs. The Mac Mini is capable of dual display, and I've gotten it to work before, so the issue is not the TV or Mac. And I have tried both Mirroring and No Mirroring.
I got a Mini DisplayPort to HDMI Adapter (#5311) and a Mini-DVI to HDMI Adapter (#4852) both from MonoPrice. And for some reason I can't get the Mac Mini to dual display, it's only one or the other.
Before I had a Mini Displayport Male and USB Male AUDIO to HDMI Female Converting Adapter (#5969) and I got video on both HDTVs, but not audio at the same time b/c one was USB and one was TOSLINK.
I'm not sure why I can't get video on both monitors. Any help?
I need to connect my 09' Mac Mini to my Yamaha RX-V2700 receiver which outputs to my Sony XBR HDTV. I know the mini has both mini-dvi to dvi and mini-dp to dvi or hdmi available via adapters. I was thinking to go with option 1 however I was wondering what is your opinions? Is mini-display port better over mini-dvi or are they the same? Audio will be carried over optical toslink.
Option 1: Using mini-dvi adapter to dvi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
Option 2: Using mini-dp adapter to dvi or hdmi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
I know this has been talked about before....just cant find the answer.... I have hooked up my mac mini to my tv via an HDMI line but there is zero sound except for what is coming from the mini itself. Its a long run so I used Cat5 wires and HDMI extenders.
I am planning to hook my Mac Mini upto my LG tv this weekend (37LG7000). DVI to HDMI cable for the video signal, and a 3.5mm single audio cable into the back of the TV for the audio..
What would the sound quality be like? Will it be ok? I know i wont get surround sound or anything.. but hopefully it will still be crisp audio...
So I have a Mac mini used as my home theatre (or rather, will be) and I have it hooked from mini-displayport to HDMI and that gives me video. Great! No audio, though.
So, how do I get audio? What connection and cables do I buy (could you maybe link from [URL] if I want to plug it into the back of the Mac mini and then plug it into the back of my HDTV.
(A bit low on money right now so I just use the speakers built into my TV for audio instead of full fledged speakers. I assume that will change what I need to do, right?)
I have a mac mini coming this week which will replace my appleTV in the lounge.
I have some questions about how to hook it all up to give me as much flexibility as possible.
I'll be connecting to my HDTV (Sony 40W4000) via HDMI (using a DVI-HDMI adapter). I realise this won't give me audio.
I run my satellite box, DVD player and appleTV through a HDMI switcher to the TV, so firstly, will the mac mini play nice with a switcher box?
Secondly, is there any way of getting audio both to my TV in stereo, and to my amp via optical? Thinking not as there is only one audio output socket which is either 3.5mm line out *or* optical toslink.
If not, then my TV would take precedence as i'll mostly be using it to watch TV. I haven't checked my TV manual yet, but how have people found using separate audio feeds (L/R RCA) into a TV that has HDMI? I'm concerned that the mini audio might bleed through when I'm watching satellite TV or a DVD - how does the TV know when to use that audio vs using HDMI? Not even sure my TV can take a separate signal.
How are people getting audio to their TVs? Might I need to look at using VGA (although that'll have issues with exact scan etc at least it should let me input separate audio, with the bonus of PiP)
Lastly, if I am forced to pipe optical to my amp as the only way to get audio from the mini, does it pipe everything down optical or only 5.1 soundtracks etc? eg are system sounds sent down optical as stereo, and will normal stereo soundtrack movies (mp4/.avi etc) play ok?
I was using my Mac mini last night and it played audio fine. (I have it hooked up to my HDTV in the living room.) However, this morning I went to watch a standup comedian and the audio wouldn't play. I rebooted. Removed the audio cord and plugged it back in. Took the video cord and plugged it back in.
Audio cord: composite Video: mini-DVI -> DVI -> HDMI
Nothing will play. There's no external speakers or anything, it's playing through the TV's built in speakers. Normal satellite TV will play audio as well.
My mini had a disk error and recommended to format and reinstall lion. Upon completion of OS install I no longer had audio and when icheck the built-in selection in setup it's not there and all control are locked. Looks like the driver is missing.
Trying to push audio to my larger display. I have the audio via HDMI cable but cannot select audio in settings. It always reverts to the headphone port.
