I am planning to hook my Mac Mini upto my LG tv this weekend (37LG7000). DVI to HDMI cable for the video signal, and a 3.5mm single audio cable into the back of the TV for the audio..
What would the sound quality be like? Will it be ok? I know i wont get surround sound or anything.. but hopefully it will still be crisp audio...
Are there any known issues (and if so, fixes) with the Mac Pro audio output? I have iTunes 7.6.2 on a (late '07) Mac Pro (OS X 10.4.10) with JBL Creature II speakers. Nothing too high-end, but enough to expect consistent sound reproduction in a small office space.
For music I've been primarily listening to pandora for quite a while now, and am finally wanting to convert my CD collection to something I can put in my iPhone. I'm going to upgrade my car stereo soon w/USB hookup. I'm a bit of a freak when it comes to sound quality, and I used to burn CD mixes so I have CDs in AIFF format on my hard drive( -I know). I know this is pretty basic, but maybe someone can link me to the right info...here's my question: What is the best audio format to convert my AIFF music files to that will have the highest quality, and I'll be able to put in iPhone and play with a new Car Stereo I'm about to purchase?
View 8 Replies View RelatedI am using QuickTime to record audios of myself talking in a quiet room, using the built-in microphone, but I just found that the audio quality is poor, even less than the voice memos I recorded on my iPod touch 4 (I said the same thing in the same room). Although I can hear my every words, I think it is near the sound quality of talking on telephone; the voice is not clear and pure.
I have the model of early 2011 MacBook Pro, with the newest OS X Mountain Lion.
headset mic with excellent audio quality for VoiP and listening to music? I currently use a set of Sennheiser PX100s and a desktop mic and would like to consolidate.
View 1 Replies View RelatedMy iMac 24" (3.06 GHz Core 2 Duo, 4 GB memory, one of the newest generations) has an audio out jack that double as an analog/digital out? I have a high end sound system with receiver, sub, speakers, surround, etc. that I want to deliver the highest quality sound I can from my iMac. I use optical cables with my other peripherals yet I was unaware that there was a converter that could take an optical signal to an analog "headphone" jack? This doesn't reduce the quality at all? Could someone tell me the exact name of such a converter and if I'm correct in assuming it allows a standard optical fiber audio cable to fit in the "headphone" jack on my iMac. Would like to run out and grab one. And again, is this the best option for highest quality audio from my iMac?
View 12 Replies View RelatedI know there's some subtle differences between the HK Soundstick version I & II, but I was wondering if there's actually any difference in audio quality between the two? Or is it simply cosmetic/feature differences?
View 1 Replies View RelatedI have Vista (yeah, yeah, it sucks. Really. Just testing the Ati card) on my brand new iMac 24 and the audio quality is VERY low. Worst than the macbook speakers. The strange thing is that in MacOSX the quality is good and even in Vista with earphones. I reinstalled the Realtek HD drivers but it didn't change anything.
View 5 Replies View RelatedWhat is the best software for recording streaming audio? I know QT X can now do it, but the quality of the recording isn't the best...
View 2 Replies View RelatedI currently use the Logitech Z-5500 Digital 5.1 Speaker System in my home office, which by all accounts is a pretty high-end system (maybe not for a true audiophile, but for an average joe like me they're great). I am trying to figure out what the best way would be to share a single input on this speaker system between two computers (a Mac Pro and an iMac).
I am currently using a basic headphone splitter with two standard 3.5mm male-to-male stereo cables to perform the task, and for the most part it works just fine with one minor issue that is likely to prevent me from keeping things setup like this. There is a subtle, yet clearly audible humming noise coming out of the speakers.
Is it just me or does Skype have the superior audio and video quality?
Whenever I do some audio or video chatting it seems subjectively better than iChat. (Both on a Mac tried close after one another.
I recently got a receiver and surround sound speaker system. The quality of the audio from the CD player connected to it is far beyond the quality of the audio that comes from the MacBook pro via headphone jack to RCA connection. This was confirmed by burning a CD from the MacBook, placing it in the CD player then testing the two against each other - the same audio piece from the CD player or the MacBook, both connected to the same receiver/speaker set up. What other options might get better audio quality from the MacBook to the receiver?
Info:
MacBook Pro, Mac OS X (10.5.8)
I want to hook my Macbook Pro up to a Sony Bravia (not sure of the exact model). I went to the Apple Store, and was given these two items to hook it up. Moshi Mini DP to HDMI Adapter with Audio Support. Belkin High Speed HDMI Cable - 6 feet
We successfully hooked it up last night, and the video worked. I was told in the store that this setup would not transfer audio, so I already knew there would not be sound coming from the TV, rather from the Macbook instead. My Q is: What's the easiest way to get audio to come from the TV? I'd rather not buy external speakers to plug in, if I can help it.
A couple of years ago when I got a tv for my room, my dad built a rack of shelves into the wall, one for my tv, one for my stereo and one for random stuff. It's always been nice, but restricting. I like to move my room around, and My desk is forced to stay right next to that rack to transmit audio to my receiver via a hard wire. Seeing as my iMac has bluetooth built in, I was wondering if it is at all possible to send stereo high quality audio over bluetooth to some sort of receiver that would feed into two RCA plugs... Now, I'm not talking audiophile quality, this is just a $400 sony rig, no crown audio here, but I dont want it to sound like those old 900mhz wireless headphones with all the interference. Is this at all possible? Or am I doomed to either staying put, or running 5' of cable under my carpet?
View 5 Replies View RelatedI have attached my Mac mini to my Sony TV (to use as a moniter) - there hasn't been any trouble with the picture but I cannot get any sound.
I am using a VGA (I know that doesn't send audio over) plugged into the 'PC In' port at the back of my tv, and I am using an audio cable with a normal headphone-type jack on one end (going into the headphone port on the back of my mac mini) and the red/white cable going into the HDMI-in red/white ports on the back of my tv. I can't figure out what is going on - I tried plugging the red/white cables into all the input ports on the back of my tv, just in case, but no luck.
Info:
Mac mini, Mac OS X (10.4.11)
With the new Mac Mini models, you can have audio out via HDMI or the line out. I am thinking to hook the mini up to an LCD TV/monitor via HDMI (sound on the monitor) and also to my other TV/sound system via the mini DP and audio out.
I assume when the mini turns on it'll activate both displays (if they are turned on), and from what I understand you can have two displays running. I'd only want one at a time so I'd have the other display switched off. But can the mini output audio to either both, or whichever system I am using? I've read a lot of posts but can't find a definite answer. I only want audio (and video for that matter, but can turn off other screen) to one TV at a time, but do I have to go into the OS audio settings each time I want to swap between the two?
I'm also thinking of using Plex and keeping it open at all times, just sleeping the mini when not in use. Can the mini only output to one source, requiring manual switching to the other (i.e. going from HDMI to audio out)?
I have a quick question regarding the image quality when connecting my Mac Mini to my Samsung Monitor 24'' monitor. I am connecting it through a HDMI -> DVI adapter and connecting it through the DVI on my monitor. Although it does display the image, the colour look off, it doesn't look sharp or high definition at all. I checked the resolution and it shows up as 1920 x 1080, which should be very good, but the resolution doesn't look good at all. I am wondering if this is because I am using a 24inch monitor and whether I should try getting a HDMI cord to connect HDMI to HDMI from the Mac Mini to the monitor, or get a HDMI > VGA adapter instead, or maybe buy a better monitor?
View 9 Replies View RelatedI am about to buy a Mac Mini and want to find out how it works with using a 1080p (Pioneer Kuro) TV as a monitor
How does it look on the TV i.e. especifically what's the quality like?
I am sure many people have done this, I am probably going to be using a digital cable (ToSlink) for the sound and a Mini DV to HDMI cable for the video
I'm a Windows user and I recently bought a Mini C2D 1.83 to plug in to my LCD TV. The Mini is running Leopard and it's connected to the TV via DVI, 1360x768, millions of colors, the works. Everything's set up with QuickTime + Front Row + iTunes + DivX + AC3 (AC52). I dropped aliases for my Lacie NAS drive in the 'Movies' folder so that I can access my movies via Front Row. So far so good. It's a slick setup and I'm loving it.
There's just one headscratcher (and tentative dealbreaker) that bugs me... why does all video look like crap? The same movies that looked gorgeous when played back on the same TV from my retired WinXP media machine, now look like bad YouTube videos on the Mac. All dark areas are blocky as hell -- what's supposed to be black (or thereabouts) looks more like 'Turd Tetris' (a bunch of huge squares in various flavors of brown)..............
After a frustrating 2 years of video editing on a PC (crash/freeze/loss of work etc), I'm looking to switch to Mac and Final Cut. Even editing high quality SD video (720p/720i), would it be insane to buy a Mac Mini? Would it not be powerful enough? My other option is waiting for the next iMac refresh.
View 8 Replies View RelatedI have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
View 10 Replies View RelatedI just picked up a 2010 Mac Mini. Intel 2.4 cpu, installed a OWC SSD and 8gb of RAM. Anyways, using the HDMI to DVI that was included, anytime I switch to have the monitor rotated 90 degrees so it is in portrait, the quality goes away. The text no longer looks clear, the display seems to lag, and if I drag a window, the image tears really bad. Just confirmed this also happens with a mini display port to dvi connection. I have also tried 2 different DVI cables, both a single link and a dual link.
View 10 Replies View RelatedWith a sharp fingernail I seem to have damages the internal ribbon cable that connects the audio card in my 2009 Mac Mini, and am looking to source a replacement, preferably in the EU. I'm currently in the UK.The part number is 922-8809.
A Google search reveals a few parts suppliers in Europeland, but they are all charging silly prices for the cable, and US suppliers impose ridiculously high postage charges.
when I connect my macbook unibody with dvi to my dell monitor the quality of the screen is not as "good" as when I connect my windows pc to it. Is this only a problem on macbook, or is the mac mini the same?
View 2 Replies View RelatedI have the 2009 Mac Mini and was wondering if the mini display port has audio output. Does anyone know? I just want to minimize the amount of cables going to my tv.
View 6 Replies View RelatedIs there a difference in picture quality if I connect a MDP to HDMI instead of a MDP to DVI from my macbook pro to my tv?Will I be able to play movies at 1080p if I use the MDP to HDMI?
View 2 Replies View RelatedStarted archiving all my old photos and creating dvds. started off using iphoto which is great for compiling a quick slideshow to a couple of music tracks. i then imported these to idvd and created my first dvd project which i was pretty pleased with for a first attempt. The only thing i found annoying was that i could not link all the slideshows together in idvd so that they played one after another, instead you had to come back to the menu and start the next one...so i thought i would import these slideshow movies into imovie and create a complete movie with chapters, titles etc. but when i did this i noticed that the quality of the slideshow in imovie was very noticeably worse.
being new to mac i wasnt sure what was up so i thought about importing the photos directly into imovie and working with them there. but once again the quality was really poor compared to the iphoto and idvd slideshows. after this i though maybe its just a preview problem and all will be well when i burn them to dvd and watch them on tv...so i burnt a dvd with one slideshow created in iphoto and imported into idvd and also put on a movie of the same slide show that id imported into imovie and back.
anyway long story short quality still better in slide show created in iphoto.
is there any way to export the movie as high as my project quality everytime i export the quality goes down.
View 1 Replies View RelatedIs the MBP Unibody iSight quality the same as the iMac 27" quality.
View 3 Replies View RelatedIn FCPX 10.1.3 I was able to set in Preferences the Playback Quality to High Quality. I just purchased FCPx 10.1.4. It has NO such High Quality Option for Playback Quality.
Now all my still clips are blurred badly. Is there an option to set a High Quality Playback Option. Or can I download 10.1.3, the level where that worked ?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.5)
