My mini had a disk error and recommended to format and reinstall lion. Upon completion of OS install I no longer had audio and when icheck the built-in selection in setup it's not there and all control are locked. Looks like the driver is missing.
My shinny new Mac Pro Quad 2.8 defaults to the built in speaker and not my attached external logitec speakers. Every time I want to watch or listen to something I have to navigate to the sounds panel and select Line Out. Everything is connected properly and this never happened on my MacBook Pro.
My Black Macbook's (2.16GHz Core 2 Duo) in-built audio has suddenly stopped working. There is no 'Dong' at the startup. In the system profiler under the 'Audio (Built In)' tab it says that there is 'No Built-In Audio'. I can't change the volume or anything and in system prefs under sound is says no output devices are found. Has my soundcard fried? Is there anyway of replacing it fairly cheaply? My macbook is out of warenty unfortuantly! Is the only other option buying a cheap USB soundcard ? If so does anyone know of any slimline ones that would work?
I am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
I'm a recent PC to iMac convert and have hooked up my iMac to my TV receiver (DVI to HDMI connector and a Toslink cable to the audio). The issue is as soon as I plug in the audio connector the iMac speakers stop working. I'd like to leave the connector plugged in and still be able to use the iMac speakers. Of course when I play a movie on the TV I'd just mute the iMac speakers.
I came across some youtube video with dual-language audio; ie. one language on the left channel and another language on the right channel. The Output page under Sound preference does not have the left/right balance control, probably due to the mono speaker in MBA. If I connect to an external speakers, or headphones, then the balance control re-appears. Is there a way to get around this problem, if I still want to use the build in mono-speaker?
The speakers on my Macbook have suddenly stopped working. If you plug headphones in, fine. In the system preferences, 'built in speakers' are no longer an option for audio output. Just 'digital out'. When I try and change the volume of the speakers, the symbol is greyed out, and there's a little "you can't do this" symbol.
My built-in external mic doesn't record any audio when recording at all with the webcam. I've seen that this problem happens a lot in iMovie and Photo Booth, but my problem is a little unique, in that it doesn't record audio when recording with any program, not just Photo Booth and iMovie. I've tried QuickTime and even YouTube's webcam capture option, to no avail.
However, the most puzzling aspect of this is that I know for a fact that the built in external mic is functional, because I can make video calls from Skype without any problems.
I want to hook my Macbook Pro up to a Sony Bravia (not sure of the exact model). I went to the Apple Store, and was given these two items to hook it up. Moshi Mini DP to HDMI Adapter with Audio Support. Belkin High Speed HDMI Cable - 6 feet
We successfully hooked it up last night, and the video worked. I was told in the store that this setup would not transfer audio, so I already knew there would not be sound coming from the TV, rather from the Macbook instead. My Q is: What's the easiest way to get audio to come from the TV? I'd rather not buy external speakers to plug in, if I can help it.
I have attached my Mac mini to my Sony TV (to use as a moniter) - there hasn't been any trouble with the picture but I cannot get any sound.
I am using a VGA (I know that doesn't send audio over) plugged into the 'PC In' port at the back of my tv, and I am using an audio cable with a normal headphone-type jack on one end (going into the headphone port on the back of my mac mini) and the red/white cable going into the HDMI-in red/white ports on the back of my tv. I can't figure out what is going on - I tried plugging the red/white cables into all the input ports on the back of my tv, just in case, but no luck.
With the new Mac Mini models, you can have audio out via HDMI or the line out. I am thinking to hook the mini up to an LCD TV/monitor via HDMI (sound on the monitor) and also to my other TV/sound system via the mini DP and audio out.
I assume when the mini turns on it'll activate both displays (if they are turned on), and from what I understand you can have two displays running. I'd only want one at a time so I'd have the other display switched off. But can the mini output audio to either both, or whichever system I am using? I've read a lot of posts but can't find a definite answer. I only want audio (and video for that matter, but can turn off other screen) to one TV at a time, but do I have to go into the OS audio settings each time I want to swap between the two?
I'm also thinking of using Plex and keeping it open at all times, just sleeping the mini when not in use. Can the mini only output to one source, requiring manual switching to the other (i.e. going from HDMI to audio out)?
So here's my question:I've owned my share of MacBook Pro's, so I'm somewhat familiar, but not an expert. I got my mini last Friday from cowboom (a Best Buy affiliate), and since it's a pre-owned, it only came with the power cable and HDMI to DV-I adapeter. For those that ordered these, a majority of the people posted that it did not come with an OS, but the Internet Restore option fixed the trick. So I powered it on and got the flashing folder with the question mark. No OS. I did the Internet recovery and ran it through all the way to the the reinstall Lion screen. When asking what drive to install it on, there were no drives. I closed the installer and ran the disk utility and the only available drive was some basic drive that had a capacity less than 2GB. No other drives. I booted from my Lion that's on USB, but there's no drive to install it on. Any suggestions? I checked the warranty and the warranty cannot be verified. Some buyers said they had warranty from 8 months and up. One said his warranty showed starting from the day he restored his mac. I'm guessing because it was never registered I made an appointment tomorrow to take it to apple but is there something that can help avoid the trip?
I do have a copy of the the Mac Mini SL Client software but I don't have another Mac to create the USB restore disc in order to load the client on the Mini Server via usb drive. I don't intend to use the Server Software and don't want to 'activate' the license so I can resell it instead. Can I just use the Server to create the bootable restore disc without 'activating' the Server License and locking it to my serial number? Or is there another way to create the restore disc if you don't have access to another Mac to run disc utility?
I have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
With a sharp fingernail I seem to have damages the internal ribbon cable that connects the audio card in my 2009 Mac Mini, and am looking to source a replacement, preferably in the EU. I'm currently in the UK.The part number is 922-8809.
A Google search reveals a few parts suppliers in Europeland, but they are all charging silly prices for the cable, and US suppliers impose ridiculously high postage charges.
I have the 2009 Mac Mini and was wondering if the mini display port has audio output. Does anyone know? I just want to minimize the amount of cables going to my tv.
I have been searching the forums for information on this, but have only found incomplete leads.
How can I get Digital Audio out of my G4 mini? Has anyone done that?
I am trying to integrate the mini into my home theater, and would like to get 5.1 sound out of that for my DVDs, Rips, etc.... and also pipe my music over a digital cable.
I know the Mini's audio jack doubles as a Digital out, and I could get that to pipe audio into my receiver's toshlink jack, but I cannot find any cables that would provide a digital 8mm jack in one end and a toshlink or coax jack on the other..... any ideas?
Alternatively, are there any USB or Firewire sound cards that could help me. I found one by Griffin, but that is meant to connect to 5.1 PC speakers, and does not give a digital toshlink or coax output. Are there any out there that I could use to do this??
I have an '09 mini that I think I'm looking at replacing with the new '10 mini server, but I have an audio question...
I currently use the digital output of my mini to feed my amp for my HTPC setup. I also have an Airport Express that I stream audio to for my zone 2 audio on my amp (it has to be analog on zone 2).
Well my airport express recent died and killed my zone 2 music.
My question is... can I stream the audio out of the mini in iTunes and control where it goes? I'm assuming that I can plug a stereo jack in the head phone jack on the mini, but will be live along with the HDMI port? I do most of this audio management via the iPhone remote.
I want a icon on my desktop so I can quickly switch between internal sound and usb sound (tv sound).... Can that be done? I'm not good with scripts at all.
I am selling my mini to a friend and want to restore it like the way it came from apple, i.e. first time you turn it on you do all the settings (language, Internet connection, registration etc)
I know this has been talked about before....just cant find the answer.... I have hooked up my mac mini to my tv via an HDMI line but there is zero sound except for what is coming from the mini itself. Its a long run so I used Cat5 wires and HDMI extenders.
I am planning to hook my Mac Mini upto my LG tv this weekend (37LG7000). DVI to HDMI cable for the video signal, and a 3.5mm single audio cable into the back of the TV for the audio..
What would the sound quality be like? Will it be ok? I know i wont get surround sound or anything.. but hopefully it will still be crisp audio...
So I have a Mac mini used as my home theatre (or rather, will be) and I have it hooked from mini-displayport to HDMI and that gives me video. Great! No audio, though.
So, how do I get audio? What connection and cables do I buy (could you maybe link from [URL] if I want to plug it into the back of the Mac mini and then plug it into the back of my HDTV.
(A bit low on money right now so I just use the speakers built into my TV for audio instead of full fledged speakers. I assume that will change what I need to do, right?)
I used to have a mac mini on snow leopard and did a Time machine backup. Now I just picked up a macbook pro on leopard and would like to know whether the snow leopard back up will work on this.
I have not got the snow leopard disk anymore, but im sure I can get it, was just wondering if I even needed to.
I've a DVD from a Mac mini Late 2009 box, named as: Mac mini Mac OS X Install DVD. Mac OS version 10.6. Disc version 1.0 2Z691-6561-A. I think it's a build 10A432 of Snow Leopard.
I have a mac mini coming this week which will replace my appleTV in the lounge.
I have some questions about how to hook it all up to give me as much flexibility as possible.
I'll be connecting to my HDTV (Sony 40W4000) via HDMI (using a DVI-HDMI adapter). I realise this won't give me audio.
I run my satellite box, DVD player and appleTV through a HDMI switcher to the TV, so firstly, will the mac mini play nice with a switcher box?
Secondly, is there any way of getting audio both to my TV in stereo, and to my amp via optical? Thinking not as there is only one audio output socket which is either 3.5mm line out *or* optical toslink.
If not, then my TV would take precedence as i'll mostly be using it to watch TV. I haven't checked my TV manual yet, but how have people found using separate audio feeds (L/R RCA) into a TV that has HDMI? I'm concerned that the mini audio might bleed through when I'm watching satellite TV or a DVD - how does the TV know when to use that audio vs using HDMI? Not even sure my TV can take a separate signal.
How are people getting audio to their TVs? Might I need to look at using VGA (although that'll have issues with exact scan etc at least it should let me input separate audio, with the bonus of PiP)
Lastly, if I am forced to pipe optical to my amp as the only way to get audio from the mini, does it pipe everything down optical or only 5.1 soundtracks etc? eg are system sounds sent down optical as stereo, and will normal stereo soundtrack movies (mp4/.avi etc) play ok?