resolution is set @ 720p...so i hooked up my mini to my hdtv via HDMI but the fonts are hard to read. i mean they're still readable but hard for the eyes. i have my pc also hooked up via HDMI and fonts are perfectly clear and readable but not teh mini.
are there extra settings that i miss or somethin?
I was trying to modify my monitor settings and hit the detect monitors button by mistake thinking it may help a sizing issue. Now after start up white screen with apple in the middle the monitor goes blank. Is there a way to restart while holding down keys to reverse this since I can't see anything on display?
Info:
Mac mini, Mac OS X (10.7.3)
when i plug in the converter, the mac recognizes it and readjusts the screen
on the tv, (my older read projection) ,all i see is grey squiggly lines, not snow.. the picture is there but it is not converted properly. i cant see anything. i press command f1 and something usually happens and goes back to the grey shit.
i try it on my hd tv, and it just says /'no signal/', so i am assuming that the picture isnt getting converted properly. could it be my converter, or is it something in the output setting or the mini divi port? the converter i got was one from best buy- dynex, and it has a mini dvi male, and a female composite and s-video.
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
When I plug my Intel iMac into our old Sony Trinitron via the S-Video input no connection can be made. Is this a problem with leopard not recognizing my TV or possibly something else?
View 9 Replies View RelatedThe old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies View RelatedAgain I am ignorant, what 'geometry' and OSD settings for khz should I use? if I can use it with Pro 2007
View 4 Replies View RelatedJust bought a Samsung 2333SW Monitor and plugged it into my Mac Mini. The screen looks like the monitor was dropped (psychedelic) when the desktop is displayed. It worked fine on my 17" Samsung monitor, but not the 23".
I exchanged the monitor, and its not the monitor. I was told its the driver on the Mac. I cannot find any driver online for my Mini through Apple, or even at the Samsung sites.
Is there a noticable difference between using a mini DP DVI vs mini DP VGA to external monitor that has both types of inputs?
Info:
17 MacBook Pro i7, Mac OS X (10.6.5)
i've looked far and wide for a way to turn the monitor off on my new imac 24", nvidia 8800, running xp and still havent found anything. does anyone know of a way to turn it off? i've tried to set the "turn monitor off" setting to 1 min under power management and it gets ignored. also, i've even written an app to try and turn the screen off based on this: [URL:...] and it is also completely ignored.
View 1 Replies View RelatedDoes anyone know if it's possible to dim my late 2008 macbook's display more then the lowest setting allows? It seems way too bright in the dark even at the lowest setting, plus I would like to save more battery if possible.
View 2 Replies View RelatedI have always wanted a mac and for the most part it has been money in past years that have kept me away. Aside from apple.com tutorials and playing around a few times at my local BestBuy I know very little about using them (or any computer for that matter). Between this forum, available books, and ease of use I figure it'll all work out. I do have a couple of specific questions and would greatly appreciate some advice.For me I have to go mini because I have an eye disease, and some other eye related issues that make me extremely sensitive to the LED backlit glossy displays that the imac and macbooks use. Even when dimmed. So I have no choice if I am to own a mac now, it's mac mini or nothing.
View 19 Replies View RelatedIs it possible to use my iMac as an external monitor? I want to use my Mac Mini with it.
View 5 Replies View RelatedJust about to purchase the new mini and I need to buy the adapter to use dual monitors. Is it the Apple Mini-DVI to DVI Adapter that I need to buy? I'm connecting my Samsung 24" which is dvi.
Just wanted to double check before I purchased it.
Is there an adapter that connects a mini DVI to a mini Display port so I can use one computer as an external monitor?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.6.8)
I'm using a Mac Mini (running 10.3.8) connected to an old View Sonic E95 monitor. No problems except that every time I leave the computer for a while it goes to sleep and "forgets" what display it is connected to. When I hit a key or whatever to reawaken it, the display resolution has been re-set to "VGA 800x600" and I have to tell it to "Detect Display" again..
Any clues? I have looked on the forums and Google with no success .
I currently have a MBP1, 1 running 10.6.4 on an external monitor with the ideal resolution at 1920x1200. From time to time, when I wake my MBP from sleep through external keyboard/mouse to have it run solely on the external monitor, it sets the display at 1600x1200, so everything seems squished vertically. After a fresh reformat, the problem persists, though it is less frequent. It's just a minor annoyance that I can't seem to find a solution to fix permanently. I usually have to go to safe mode and adjust the resolution back to normal. Alternatively, only sometimes if I put it back to sleep and wake it up again with the external keyboard, it will detect the right settings.
View 1 Replies View RelatedSoon as i place a file in the trash it deleted completely and doesnt sit in trash. I'd like to be able to restore a file if need be, as i have just lost alot of pictures
View 16 Replies View RelatedI have a MBA (my first apple since the Mac SE 20... ha!) and I have a Dell 2300 multimedia projector. I have the DVI-VGA adaptor, but I can't get a good picture to project. I've toyed with the display settings to see if I can get it to improve. The picture stays dark, or blurry, etc etc.
Is there a setting I'm missing, or could I maybe have a bad adaptor?
I have a new Mac Mini. I have the mini display port to dvi adapter that came with it. I want to connect to Samsung monitor with a dvi-d port. My problem is that I can't find a dvi-d cable shorter than 6'. Since the Mac Mini sits on my desk next to the monitor, I would like to have a short cable or one that would go directly from the computer to the monitor without an intervening 6' long cable. Anyone know where I can get one?
View 4 Replies View RelatedI am looking for a program that will allow me to clone my hard drive onto another 2.5" HDD so that I could replace my 320GB with a 500GB.
I really do not want to relaod everything all over again if I do not have to?
I have an external USB camera it is a Z-Star PC Camera. How do I get it working on my MBP 17"?
I need a moveable camera for some projects and need this working as soon as I can.
I also have Windows XP on VM Fusion and it does recognize it but I can't get it to work on there either.
you can now adjust the awesome bar behavior if you want to exclude history, or bookmark, or both.
and you can set up in more detail about what kind of private information you want firefox to remember.
when clear private data, you can select if you want to clear everything, or just the data from past hour, past 2 hours, or past 4 hours.
I am on the way to install Transmission on a Unibody 15".
I see the firewall has 3 different settings:
Allow all incoming connections.
Allow only essential services.
Set access for specific services and applications.
Which setting would be most secure but still functional with Transmission?
I just got my MX Revolution today from Newegg and I'm working on configuring it (especially the scroll, which I can't seem to nail). I've been using Logitech Control Center, which seems to do everything I need...
This is what I have so far:
L click: left click
R click: right cilck
scroll: smooth scroll in firefox/safari, alternating scroll globally
scroll click: middle click in firefox, switches scroll modes globally
At moment my router is a linksys WRT54G.
But my TC 500GB just arrived at home!
Is it easy to install? Or there is a special settings?
I have a Bluetooth mouse that I use with my MacBook Pro.
In Tiger & Leopard, I was able to set my Mac so that it disabled the trackpad from use when the Bluetooth mouse was connected. I just noticed that that setting has been undone and I can't seem to find the preference to set that setting.
Anything? Thoughts? This obviously isn't a crisis, I'm just curious if they've moved the preference someplace else... or something.
My wife has an iMac (I don't know any other way to identify it e.g. model number), and she has this 3rd party calibration software that I'm trying to use. I am not used to a Mac, and I cannot find the display settings for the monitor. There are no buttons on the monitor, and when I go to preferences, I can only find the brightness control. I've googled this and cannot find a clear, simple answer. I have used every version of Windows (currently on 8.1 on my PC) and it's easy for me on that platform. I suppose it's just that I don't really know how to navigate Mac OS.
Info:
iMac, Mac OS X (10.6.8)
Here's what I've tried:
System Preferences > Network > Show: Airport
Click on TCP/IP button
I see the box for DNS server info, but it's blank.
I want to know which DNS server(s) my computer is hooking up to to determine whether it's infected with a certain malware. (See [url]...) It sounds outlandish, I'm only concerned because my roommate's computer is infected and we share a wireless network, which can also apparently be compromised.
Info:Mac mini, Mac OS X (10.4.11)
My Sharp TV only support 1080i, so I use a DVI-DVI cable to connect a monitor, then use Mini DisplayPort to HDMI adapter connect Sharp TV.
Then boot Mac mini, I got Open Screen on Monitor, and I set HDMI adapter to 1080i, then I power off and unplug DVI cable and boot again.
Well, I got what I want on Sharp TV, it is 1080i, but I found a 720p, I selected it, now the TV becomes to black screen with "Invalid video signal"!
I reconnect monitor, so Sharp TV is ok, but if I unconnect monitor, the sharp TV will be black screen.
I thought it might be some display settings are saved, because it was good when I first use TV after set to 1080i, but I selected 720p that is PAL TV, not for mine NTSC TV, after that selected, THe sharp TV can't be used alone, how can I reset display settings? what can I do for this case?
