Just a quick silly question.iMac EFI Firmware Update popped up on the software update and I have now completed the update.It is okay to delete the iMac EFI Firmware Update from the Application Folder once you have updated the iMac?Also, if I have the Airport & Ethernet cable connected to my router, will my iMac use the Ethernet connection as default?
View 6 RepliesAfter the firmware update yesterday, the finder on my MacBook Pro is no longer able to transfer files from my iMac to my MBP or vice versa. Most folders on my other mac are visible, but some crash the finder, transferring files gets part of them moved over, but then it stalls and crashes the finder.Seems like a serious bug. Or has the firmware update simply removed the file transfer possibility at all?Reinstalling Lion wasn't even possible as the recovery program stalled as well. It was not possible to choose a language.
Info:
MacBook Pro, iOS 5.0.1
I have updated my 2009 imac to Yosemite but with my ethernet cable plugged in I cannot access the web. The wireless works when the cable is unplugged but no internet when I plug it in. The ethernet is shown as connected with an IP address etc when I check network preferences.
Info:
iMac, OS X Yosemite (10.10.1)
Got my iMac back in the end of February and it's been working flawlessly. About a month ago though, my connection started randomly dropping after periods of moderate internet-use. Say maybe, 20-30mins of browsing. It usually starts working fine after I shut the computer off for a while and try again. I thought maybe it was the ethernet cable, so I got another one, but with the same result. So it got me thinking, maybe it is my ISP. Called Verizon up and they said everything looked good on their end and that my IP was showing up fine. They reset my connection, but with no result. The gentleman on the phone suggested it maybe the computer.
I took my Dell laptop and tried surfing using the built-in Wifi for a while. 2 hours later...working fine. So I tried pluging the ethernet cable to the laptop, worked fine again. So now i'm thinking it HAS to be the computer. So switched the built-in Airport Wifi on the iMac on and tried it out. 2 1/2 hours later...everything works great. WHAT THE HELL!? I'm thinking, since it just suddenly happened, the problem must've been triggered by some sort of update I did(which I don't remember if I did). I searched the Apple Support forums and it turns out, several people have had the same/similar problem with their Macs with no solution.............
Guess what i did? Yup , inserted the OSX disc without the firmware update. Got back into os 9 with the "sleep and wake" trick, But i do not know how i can install the firmware update. I have it download though.
View 2 Replies View RelatedWhen given a video card update (esp from using windows) it almost always improves the video card. Apple releases the flicker fix update and I don't have a flicker issue. No screen issues at all really.
I feel like it's Russian roulette. Update or not? I know some people will say don't fix what ain't broke, but what exactly is IN the fix? Is it exclusively for the flicker issue or does it update/upgrade other aspects on the card? Mine has the ATI card in it.
It's avihappy again and I have another survey for you all. As you can see, there is now an iMac 4850 EFI firmware update available via software update. So can you: Find a test that will cause the iMac to freeze up. Do the update. (make sure you actually run the firmware updater tool, it may not run automatically when you install the update from Software Update.) Switch to WiFi. Do the test again. See if the iMac freezes!
View 24 Replies View RelatedCheck software update.
Here's the official Apple link:[URL]
at what speed data is transfered to TC if IMac (Quad Core I5) is connected to it via ethernet port?
View 2 Replies View Relatedhow can i connect my mac mini with my powerbook
View 7 Replies View RelatedI have an ethernet cable. i have an alu macbook. i have an iMac. i need to transfer files between the two. tried connecting the ethernet cables. on the macbook it says "ethernet cable not plugged in"
on the iMac it says "ethernet cable not plugged in".
i know the ethernet cable works because i brought my macbook up to my router and used the ethernet cable to connect to the internet. it is Cat5 or whatever. i've tried everything static IP addresses. restarting. replugging. over and over and over. no luck. the macs just pretend there is no ethernet cable plugged in. tried DHCP. tried manually. but it works when i connect my macbook to my modem.
i've tried everything. i've googled, i've mroogled. nothing works. i spend two hours trying to work this out myself before coming here. every single webpage online just says "oh just turn on file sharing LOL then it works" not for me it doesn't. i've tried that. i've tried it over and over and over again. it doesn't work for me. still won't recognize.
i'd use wireless connection to transfer but that'd take like 20+ hours to send 60GB+ of data. too long (iMac is not at my house) are ethernet cables just fail? this is a BRAND NEW 20 inch imac and a aluminum macbook from 2008.
I know this affects iMac users than any other product so I thought it would be worth mentioning that Apple has released a Bluetooth firmware update found in Software Update: This update provides bug fixes and better compatibility with the Apple Wireless Mighty Mouse and Apple Wireless Keyboard. It installs on all Macintosh systems with Bluetooth based on the Broadcom chipset. Those who are having trouble, download and note any improvements for others who are having the same problem.
View 1 Replies View RelatedI have one of the original MacPros 1,1 2x266 currently running OS X 10.7.3. and indicating ROM Revision 3011. When I try to run this update, it fails saying I need OS X 10.6. Do I need the update (I presume yes since my ROM rev is lower), if so how can I install it?
Info:
Mac Pro, Mac OS X (10.7.3)
I did a software update last night and the firmware update attempted to install. Unfortunately, it errors out with the message:
Necesary resources are missing, corrupt, or do not have the correct permissions. Delete the iMac Graphics Firmware Update and re-download it and run again.
I was reluctant to update my 27inch i5 iMac with the new graphics card firmware update since I wasn't having any flickering issues. I finally caved in and did it thinking that nothing bad will happen, well of course something did. Ever since I updated it yesterday my computer makes a distinct and random popping sound from the speakers, it is soft but audible in my quiet room when I am working and it is driving me crazy.
View 1 Replies View RelatedI have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
View 2 Replies View RelatedSuperdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.
Info:
MacBook, Mac OS X (10.6.8)
I installed it 2 times with the software update e 1 time manually..
What's wrong? This is from the system profiler
Quote:
Versione Boot ROM:MP51.007F.B01
Version SMC (sistema):1.39f11
Versione SMC (slot processore):1.39f11
is the 1.39f11 the correct version?
just checked software update.
downloading now.
I used the MacRumors Buyer's Guide for several months to find the best time to buy a MacBook. I'd never had a Mac before and found it to be so valuable. I hope someone in the forum can be as helpful as the site has been.
Yesterday I bought a new MacBook Pro 13" and as a store option the RAM was doubled to 4GB. Everything has worked well so far, in both OS X and Windows XP through Boot Camp, except for either OS accessing the LAN cable on my home ADSL. Both my portable modem (EMobile network in Japan) and the wireless seem to work with no issue, and both OS will recognize the ethernet port. I'm concerned that perhaps the ethernet adapter was modified when the store installed the memory.
I can remove the ethernet cable from one computer (where it works without any settings changes on my Windows notebook) and plug the same cable into the MacBook and it will not be recognized. The Mac OS error is that no cable is inserted.
However, as it's my first Mac, I didn't know if perhaps some new settings are required to make things work smoothly. Is there any DNS settings etc. that must be set for it to connect? Also is there some kind of connection diagnostic that will specify the location of the error in the machine? I'd like to exhaust any option before shipping this back to the store to be repaired or replaced.
I am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
View 4 Replies View RelatedI've just got my hands on three G4 AGP Power Macs and in my rush to upgrade them to OSX I didn't upgrade the firmware. I now find that I can't use 512mb Ram as it only works with the current firmware update. But I no longer have OS9 to boot from so how do I update it? Or where can I find OS9?
View 5 Replies View RelatedI get this error: "unexpected error occurred (0); unable to upgrade firmware". They refer me to this site: [URL]. I just bought this late 08 MBP and I have a bootcamp partition running Windows XP Pro 32Bit on a NTFS partition. Why is this so complicated? Macs have always been easy on me until this. They tell me to do a full reinstall but I don't understand how this will fix the problem since I don't know where this comes from. It says to go check my "Partition Map Scheme" and I have a "Master Boot Record". It says I need a "GUID_partition_scheme". How come I don't have a "GUID_partition_scheme"?
View 2 Replies View RelatedI tried to apply the firmware update to the Intel X25-M SSD on my 09 MP yesterday. I'm not currently having any issues with the SSD, but thought I would be proactive about updating.The update failed , and I received the following recommended changes before trying again:- Disable Drive Protection in your BIOS and retry the update- Enable Legacy IDE mode in your BIOS and retry the updateHas anyone out there successfully applied this update on an 09 Mac Pro? If so, were any tweaks needed to make it work?
View 18 Replies View RelatedIf rev C runs the GPU at a higher speed and hw otherwise is the same as rev B then why couldn't Apple release a firmware update to let rev BGPU rum faster as well?
View 18 Replies View RelatedJust got this through Software Update. More info here:
[URL]
Quote:
About MacBook Pro EFI Firmware Update 1.8 This update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, run Software Update again, and install SuperDrive Firmware Update 3.0
To complete the firmware update process, follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the installation is complete.
"the AirPort Disk became available. what do you want to do?"
I typed my network and password.
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
i have my mac pro using one ethernet port for net connection can i put a sec cable in the other port connect it to my macbook pro and share the connection?
View 1 Replies View RelatedI'm trying to setup internet sharing on a 24" intel imac running the latest 10.6.
We are trying to share an ethernet connection over airport, however I cant seem to get airport to appear in the 'to computers using' list.
