OS X :: Cannot Install New Firmware Update

Dec 11, 2008

I get this error: "unexpected error occurred (0); unable to upgrade firmware". They refer me to this site: [URL]. I just bought this late 08 MBP and I have a bootcamp partition running Windows XP Pro 32Bit on a NTFS partition. Why is this so complicated? Macs have always been easy on me until this. They tell me to do a full reinstall but I don't understand how this will fix the problem since I don't know where this comes from. It says to go check my "Partition Map Scheme" and I have a "Master Boot Record". It says I need a "GUID_partition_scheme". How come I don't have a "GUID_partition_scheme"?

View 2 Replies


ADVERTISEMENT

MacBook Pro :: EFI Firmware Update 2.8 Does Not Install

Apr 1, 2012

MacBook Pro EFI Firmware Update 2.8 does not install. I was prompted several times to install and restart (MacBook Pro late 2008) and authorised it each time. In every case, the update was proposed again when Software Update checked. I have OS Lion latest version installed. What to do about this bug?

Info:
MacBook Pro, Mac OS X (10.7.2), photos in Sony Cyber-Shot .jpg

View 7 Replies View Related

MacBook Pro :: Won't Install Firmware Update / Can't Work With Fans And Temp

Feb 8, 2010

I'm nervous to install the Firmware update 1.3. As I've heard from a lot of people the update has crashed their mac. I know it has to do with the fans and temp. My Mac book pro is running at 135 F at 2000rpm is this ok? Is it too overheated. Should I install the firmware I'm so nervous to install it just in case it breaks. Here's the rest of my specs...

Model Name:MacBook Pro
Model Identifier:MacBookPro3,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.2 GHz
Number Of Processors:1
Total Number Of Cores:2

View 2 Replies View Related

OS X V10.5 Leopard :: Can A Firmware Update Cause The Origanal Install Disk Not To Work

Apr 18, 2012

Have an iMac MA877LL that I needed to replace a hard drive on. After the drive is replaced and I run the install from the disk that came with the computer. I get can not install on this computer. I can see the drive from the install disk utilities, partition it (1 Partition, Journaled.)  can run verify and repair on it, no problem found. 

Info:
iMac, MacOS X (10.5), MA877LL

View 2 Replies View Related

MacBook Pro :: Install Firmware Update Prior To Or After Clean Installing Os X Lion?

Jul 5, 2012

Just bought a new SSD I plan to swap into my MacBook pro (mid 2010 6.2). I plan on clean installing osx Lion and thought I would try to make the installation go as smoothly as possible by updatingthe firmware, if needed, on both the new drive and the MacBook pro. 

-Model: MacBook Pro 6,2 (mid 2010) - 15" i5 2.4ghz

-Current Boot ROM: MBP61.0057.B0C

I'm wondering if I need to wait until os x Lion is installed before I install this update? Perhaps it will automatically via "software update" after Lion is installed. It looks like the fix is pertains to osx Lion functionality, so maybe it would've already been downloaded via software update if Lion was installed as opposed to snow leopard which is what I have currently.The article says " If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed." Which update installer are they referring to and where can I get it? I thought it'd be better to update the firmware prior to installing the os, but maybe that's just an old habit I picked upnwhile using windows.

Info:
MacBook Pro, Mac OS X (10.6.8), mid 2010 6,2 15" 2.4 core i5

View 7 Replies View Related

MacBook :: Software Update Failed - EFI Firmware Update 1.4?

Mar 3, 2012

Superdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.

Info:
MacBook, Mac OS X (10.6.8)

View 1 Replies View Related

Mac Pro :: Software Update Keeps Notifying Me The Firmware Update?

Oct 30, 2010

I installed it 2 times with the software update e 1 time manually..

What's wrong? This is from the system profiler

Quote:

Versione Boot ROM:MP51.007F.B01
Version SMC (sistema):1.39f11
Versione SMC (slot processore):1.39f11

is the 1.39f11 the correct version?

View 5 Replies View Related

OS X V10.7 Lion :: Click To Restart The Computer To Install The Update, The Update Doesn't Install?

May 10, 2012

I'm trying to update my Macbook Pro to the new 10.7.4 I have downloaded the update twice (no interruptions during download) and when i click to restart the computer to install the update, the update dosent install. I keep getting an error message saying the download is corrupted, when the update tries to unpack to install.  

Info:
MacBook
Pro, Mac OS X (10.7.3)

View 5 Replies View Related

Mac Pro :: Using EFI Firmware Update 1.2

Sep 27, 2007

just checked software update.

downloading now.

View 24 Replies View Related

PowerPC :: How To Update Firmware On G4

Feb 26, 2007

I've just got my hands on three G4 AGP Power Macs and in my rush to upgrade them to OSX I didn't upgrade the firmware. I now find that I can't use 512mb Ram as it only works with the current firmware update. But I no longer have OS9 to boot from so how do I update it? Or where can I find OS9?

View 5 Replies View Related

Mac :: Intel X25-M SSD Firmware Update On 09 Mac Pro

Apr 15, 2009

I tried to apply the firmware update to the Intel X25-M SSD on my 09 MP yesterday. I'm not currently having any issues with the SSD, but thought I would be proactive about updating.The update failed , and I received the following recommended changes before trying again:- Disable Drive Protection in your BIOS and retry the update- Enable Legacy IDE mode in your BIOS and retry the updateHas anyone out there successfully applied this update on an 09 Mac Pro? If so, were any tweaks needed to make it work?

View 18 Replies View Related

MacBook Air :: Rev C Has GPU X6 Then Why Not A Firmware Update To X6 For Rev B

Jun 14, 2009

If rev C runs the GPU at a higher speed and hw otherwise is the same as rev B then why couldn't Apple release a firmware update to let rev BGPU rum faster as well?

View 18 Replies View Related

MacBook Pro :: EFI Firmware Update 1.8 Available

Dec 9, 2009

Just got this through Software Update. More info here:

[URL]

Quote:

About MacBook Pro EFI Firmware Update 1.8 This update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, run Software Update again, and install SuperDrive Firmware Update 3.0

To complete the firmware update process, follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the installation is complete.

View 4 Replies View Related

MacBook Pro :: Using SMC Firmware Update For 2007-08 MB's And MBP's?

Oct 8, 2010

[URL] MacBook SMC Firmware Update 1.4 is available either through Software Update or via direct download, and is applicable to the following models:

MacBook (13-inch Late 2007)
MacBook Pro (17-inch, Early 2008)
MacBook Pro (15-inch Early 2008)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)

View 1 Replies View Related

MacBook Air :: Case For MBA - How Do I Update The Firmware To 2.0?

Dec 13, 2010

I finally brought the 13in macbook air. What are some good softsleeves for macbook air 13in. I want a soft sleeves that fits perfectly with macbook air and below $30. Is it possible?off topic: this is my first mac computer, how do I update the firmware to 2.0?

View 1 Replies View Related

Mac Pro :: Wake From Sleep After Firmware Update

Apr 30, 2008

Before I purchased my Mac Pro on friday, I made sure to read these forums to make myself aware to some problems that could occur. When I got home, I made sure to do all the software updates and the Mac Pro is completely up to date, including the latest update from yesterday. However, this morning when I went to wake up my Mac Pro I couldn't get it to work so I had to do a hard restart. Should this be a concern for me? I put it back into sleep mode again and it woke up fine.. Could this have been a fluke?

View 9 Replies View Related

PowerPC :: IMac G3 - How To Update Firmware?

Jan 29, 2009

Guess what i did? Yup , inserted the OSX disc without the firmware update. Got back into os 9 with the "sleep and wake" trick, But i do not know how i can install the firmware update. I have it download though.

View 2 Replies View Related

MacBook Pro :: Installing EFI Firmware Update 1.7?

Jun 22, 2009

After the update, my MacBook Pro is extermely sluggish. Prior to the update, I was zipping along like most happy MacBook Pro owners. After the update, I constantly see the dreaded beach ball when doing almost anything with the laptop, Safari pages take longer to load, etc.

It's almost as if the udpate had the opposite effect and actually throttled down my WD 500GB HDD performance to a large degree.

Like I said, prior to the update all was good. I've been searching to see if there is a way to revert back to the previous firmware to validate that the update caused the problem but I haven't been successfull in finding anything yet.

View 24 Replies View Related

IMac :: Unable To Update Firmware?

Jan 5, 2010

When given a video card update (esp from using windows) it almost always improves the video card. Apple releases the flicker fix update and I don't have a flicker issue. No screen issues at all really.

I feel like it's Russian roulette. Update or not? I know some people will say don't fix what ain't broke, but what exactly is IN the fix? Is it exclusively for the flicker issue or does it update/upgrade other aspects on the card? Mine has the ATI card in it.

View 17 Replies View Related

MacBook Pro :: EFI Firmware Update Annoying Pop Up

Jan 8, 2010

I currently have version 10.6.2 update for my macbook pro and after updating the EFI firmware update to 1.8 I get an annoying pop up every time I start the computer. I checked for any additional updates to see if it will go away, but I seem to have all the updates. Is there anything I should do to get rid of this pop up? Pop-up window reads: your computer's firmware is up to date with version 1.8 of the macbook pro EFI firmware update.

View 1 Replies View Related

MacBook Pro :: EFI Firmware 2.5 Update Is Hanging Up?

Feb 23, 2012

Just downloaded new firmware at suggestion of my auto-update app. Since loading, the computer has been trying to reboot for over 45 minutes so far. Grey screen w/ Apple logo and spinning grey wheel...The firmware update info says not to turn off, unplug, etc until rebooted.

Info:
mbp, Mac OS X (10.5.2)

View 1 Replies View Related

MacBook Pro :: Ram Not Working After 2.8 Firmware Update?

Feb 29, 2012

Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?

Info:
MacBook Pro, Mac OS X (10.6.8)

View 4 Replies View Related

Mac Mini :: Firmware Update Not Successful?

Mar 9, 2012

having issues updating thier firmware? Software update shows the 1.6 firmware update needing done, I go throught the process, it reboots and never installs the firmware. System profiler still showing the old version. I tried downloading the file from Apple's website and manually installing and it does the same thing. I'm at my wits end here. It doesn't really bother me except that it constantly shows up in software update.

Info:
Mac mini, Mac OS X (10.7.3)

View 14 Replies View Related

MacBook Pro :: Firmware Update Causes It To Not Respond

Mar 24, 2012

I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there. 

I've tried all the on line solutions I can find on Apple's site, but no luck.

Info:
MacBook Pro

View 1 Replies View Related

MacBook Pro :: EFI Firmware Update 2.5 & Booting OS 10.6.x?

Apr 23, 2012

Are there any known compatibiity issues with booting from an OS 10.6.x drive after installing EFI Firmware Update 2.5?I am running Lion (10.7.3) on my MacBook Pro (13-inch, Mid-2010) but have held off installing the firmware update because being able to boot from a 10.6.x backup drive is more important right now than internet-based Lion recovery. If there's no issue booting 10.6.x (and running apps), then I will go ahead and install the firmware update, otherwise I'll wait awhile longer.

Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)

View 2 Replies View Related

Power Mac :: Update Firmware / Bootrom To 4.2.8

Apr 23, 2012

how can i update the firmware/bootrom to 4.2.8 for my power mac g4 ( gigabit ethernet) ? i am using mac os x 10.4.11, and dont have a disk with mac os 9.

View 11 Replies View Related

MacBook Air :: EFI 2.9.1 Firmware Update Not Installing

Sep 6, 2014

I've been having an issue trying to install the recent MacBook Air EFI Firmware update version 2.9.1. I have attempted the following: 

- Installing update via the App Store

- Installing update via Software Downloads from Apple website

- Verifying boot drive using Disk Utility and fixing and partition errors, as well as checking and fixing any permission errors. 

Info:
MacBook Air, OS X Mavericks (10.9.4)

View 2 Replies View Related

MacBook Air :: Recent Firmware Revision Update On MBA?

Dec 10, 2010

I did the latest firmware update few days ago and went through that series of boots. It's a shame on me that I didn't jog down the ROM revision info before the update. According to the this link:

[URL]

The FM Rev should be MBA31.0061.B01 after the update.

My MBA 13 is still read MBA31.0061.B00 after I thought I did the update. Does that mean the update didn't go through?

View 2 Replies View Related

MacBook Pro :: Momentus XT Firmware Update Through Parallels

Dec 20, 2010

Will updating that firmware bring me trouble if I do it through Parallels?

View 4 Replies View Related

Mac Pro :: Won't Fix / Update Keeps Telling Radeon 2600 Firmware Is Available

Mar 15, 2008

Update keeps telling me the Firmware for the 2600 is available even when I install it. I have 2 cards.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved