I used boot camp to install windows 7 on my imac 10.6 and after it finishes installing the computer restarts and it'll just bring me back to the installer and when I eject the disc it brings me back up to osx without any way to go to windows. I can view the partition and it says that windows 7 is installed but I dont know how to get the windows 7. Every tutorial I see windows automatically boots up. I might just be missing something really simple, but its frustrating and I want to solve the issue
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I am having trouble playing MKV files in Quicktime X. I have Perian installed. When I click on an MKV file to play it it plays fine in Quicktime 7. Is there something I need to do to allow mkv to be played in Quicktime X?
So, for the last week or so I'm been experiencing very strange symptoms, which I think are probably all connected:
1) My MBP (running 10.5.8 bought in August 2008) has from time to time just been turning itself off. Like, I'm just working on something and then it suddenly turns off. 2) My mouse from time to time stops responding to input, sometimes the keyboard does the same thing 3) When I restart after 1 or 2 occurs, it doesn't work. The computer turns on, I get to the screen with the apple on it (there's a chime all of that), then it goes to a plain blue screen and just stays there - the log in box never comes up. 4) In what I think may be related, my computer seems to be running extremely "hot" right now. After just normal use, I'm reaching GPU temperatures as high as 75 degrees according to iStat and CPU temps around 70.
I have used a Macbook Pro from 2007 and have now recently bought the all new 17 inch Macbook Pro.
Something that really annoys me (and my ears) in the new MBP is the crystal clear sound of the Macbook pro speakers when i hit the Volume up or down key on my keyboard. The sound is just too treble and so loud and it gets even worse when i put headphones on and turn down the volume its even more deafening.
Since I updated to 10.6.6 I can no longer open my mail application. I get a message stating that "You have version 4.3 (1081/1082) of mail. It can not be used with the Mac OS X Version 10.6.6."
When I was updating my mail was not in the application folder but within a separate folder in the app folder, so it may not have been updated.
Now my question is how do I solve this, I can't work properly without the mail application!
Sometimes, while watching a streaming video on my Macbook, the audio begins stuttering and tearing (that's the best way I think to describe it). Pausing and refreshing the tab is useless, and, usually, closing and reopening the browser is equally useless. This problem is not limited to just one steaming site -- issues occur on Youtube, Hulu, Megavideo etc... For about ten minutes (though sometimes longer), the audio across all programs on my Macbook does not work properly until the problem mysteriously solves itself.
my OS has been crashing and making me restart my computer but as of yesterday I started getting messages that my startup disc was almost full and then Itunes deleted all my songs. I managed to get them back, but I'd like to fix this problem....Will buying more hard drive space
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
it seems that both Time Capsule and Leopard Server both use port 548 for file sharing. So if I have both the server and Time Capsule with File Sharing turned on, any attempt to login will go to the Time Capsule and not to the server.
If I turn File Sharing OFF in Time Capsule, I can than map port 548 to the IP of the server machine and users can properly login into the server again.
Before I go to sleep, I always put my Mac in sleep mode. But about 90% of the time it wakes up about 2 or 3 seconds later, and I have to put it back to sleep again.
Why is this happening and how can I resolve the issue?
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
