Ok so i been using a pny 4gb thumb drive and i used it earlier htis morning perfectly fine. i gave it to a teacher to upload work. and got it back and now its giving me a disk isnt readable on this computer. i tried goin to disk utility but its all greyed out. and ALOT of my work is on there.
Info:
Mac Pro
i have been using an external HD for a while now, i was using it today and it was working fine, then out of the middle of nowhere, i get this message: "disk insertion" the disk you inserted was not readable by theis computer....i run disk utility and get this message:[URL]can someone please give me some advice, i have a ton of important stuff on this HD!
View 3 Replies View RelatedI just recently bought my first macbook pro. I had a 500 GB WD elite passport drive. I partitioned it to Mac os extended (journaled)- for time machine and FAT for windows and mac file transfer and storage. I used disk utility to partition the drive. These two drives are detected in my mac, however when I plug in the external drive into my windows- no pop up appears telling me to open files. So I go into my computer and click on the (F) drive in my case. Windows vista then proceeds to tell me the drive must be formatted before it can be used. What problem do I have. All I want is 2 partitions one for time machine and another that will allow for data transfer and storage. I have looked but cannot seem to find and answer. I have a 160 gb hard drive, what amount of space do you recommend for the time machine partition.
View 4 Replies View RelatedI just put in a disk and it wont read it I have checked in finder and it isn't there and I've tried the eject button.
View 3 Replies View RelatedI have a Seagate HD attached to my computer that was working fine with my old iMac, but when I just upgraded to a new iMac Version 10.7.4, 3.4 GHz Intel Core i7, it seems to be doing something srewy. I use that disk for my "Backup" files. Since I have switched it to the new computer, the backups continue to fail. An error message comes up saying "The disk you inserted was not readable by this computer." I tried to repair the disk, but I get an error message that states that the drive cannot be unmounted.
Info:
PowerPC G5, Mac OS X (10.3.9)
I have a Macbook Pro with an External 2TB My Book for Mac Hard drive. I used it earlier this week, ejected and disconnected it, went to sleep and then tried to use it the next day and the error message: "The disk you inserted is not readable by this computer." popped up. I have checked partitions, firmware, etc. and all are showing that it is there. It no longer shows up in Finder, though DiskUtility does show it, though it doesn't show any of the partitions, etc. it doesn't even have the name of what I called it.
- I am trying to get access to my files, I NEED them, (don't we all?!?) But seriously, these have hundreds of photos and videos of my college seminary on them and we need them for our 10- year anniversary.
Info:
MacBook Pro, OS X Mavericks (10.9.2)
I got this message every time I boot into Snow Leopard. It's the Boot Camp drive (not partition). I don't really need it in SL, but how to hide this warning?
View 4 Replies View RelatedI have been getting an error message each time I connect an external HD to my MBP; "The disk you inserted was not readable by this computer." which allows for 'Ignore' or 'Eject', I typically ignore and all appears to run fine, but still there is something obviously off a bit, incidentally the HD is a WD 640Gb that has my iTunes library?
Info:
MacBook Pro, Mac OS X (10.7.3)
I recently had a friend fill my hard drive with movies and DVD's. Until this morning I had no problem with viewing the files on my computer and through my tv, other than the fact that I had to download VLC player on my computer as the files were all avi. Last night I noticed that two of the individual files either wouldn't load, or dropped out half way through. I fixed these files by repairing them individually, which solved the problem. This afternoon, my files were working perfectly, with no problems at all.
Tonight, I have gone to plug in my hard drive, and it won't recognise it at all, other than to tell me that the disk I inserted was not readable by the computer. This afternoon my Mac suddenly needed to restart, the grey screen came over and I had no option but to restart my computer by pressing and holding the power button. This has happened before, but hasn't seemed to affect anything?
I've tried restarting the computer and changing the hard drive into a different USB port but neither have made any difference. I've also tried to repair disk in Disk Utility, which hasn't worked either. Is there a way to fix this? Or at least get the files off the hard drive onto another hard drive? The hard drive won't show in Finder so I don't know how to back up the files as Disk Utility suggests I do. The hard drive is a HP SimpleSave, about 2 years old. Never had any problem with it before!
Info:
Mac OS X (10.6.8)
I am on Yosemite and when rebooting my iMac I get the message the disk you inserted is not readable on this computer. How do I deal with this?
View 3 Replies View RelatedI'm using a new i-mac and one of my external drives no longer is readable on the Mac. I can't do a disk repair or verify. I just get this message.
Verify and Repair volume �Monki 1�
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid record count
Invalid record count
Volume check failed.
Error: Filesystem verify or repair failed.
I'm running OS 10.5.7
A disk is stuck in the optical drive and the Mac isn't picking it up and I can't eject it.
Info:
MacBook Pro
I just bought a new 1 TB external hard drive for back up purposes. When i connect it via USB to my Snow Leopard macbook pro, it gives me a "this disk not readable by this computer message". I click ignore, and it lets me do whatever i want to the disk - read, write, etc. I have tried repair disk - tells me it's good to go, and tried reformatting several times - thought not zero disk data or the 7 pass bs.
View 1 Replies View RelatedIs there a way to increase the size of the displayed mail, as you are creating it? I have mine set to 12 point text, but it is still difficult to read. The e-mail when received is fine, it's the creating that's "tiny"?
View 1 Replies View RelatedI got this message this afternoon "The disk you inserted was not readable by this computer" with the options to either "Ignore" or Eject" This is in reference to my External Hard Drive "Buffalo" 1TB. I just got my Mac 27inch this week and when i got it i hooked up this hard drive to it, historically used on my old windows machine, but was still FAT32 formatted. I was able to upload all my pics to Aperture and music to iTunes. Was able to surf the data no problem. This afternoon i noticed that it was no longer visible in the "Finder" and afre rebooting several times,got this message "The disk you inserted was not readable by this computer" Neither the mac nor the HD was moved since yesterday, early this am when it worked.
Some info:I had used this external storage unit for more then a year.I sold my PC today so cant test if the hard drive still works on that. I have the latest 27 inch mac (2.7GHz)Storage is connected to a power source ( I tried both USB and FireWire, both yield the same message)
Info:
iMac, Mac OS X (10.7.4)
I am running a MacBook Pro, Mac OS X Lion 10.7.4 Recently, I had formatted by Western Digital 2TB harddrive into two partitions. One in Mac OS Extended Journaled) format, for backing up files via Time Machine. And the other in MS-DOS (FAT) format, for my normal harddrive use between Mac and Windows. There were no problems, until I had ejected it and replugged it into my MacBook a few days later. It came up with this error: "The disk you inserted was not readable by this computer". The harddrive doesn't show up on the Finder sidebar.
I tried opening it via Disk Utility, and gave me the following: Disk Description : WD Ext HDD 1021 Media Total Capacity : 2 TB (2,000,396,746,752 Bytes)Connection Bus : USBWrite Status : Read/WriteConnection Type : ExternalS.M.A.R.T. Status : Not SupportedUSB Serial Number : 5743415A4137383538373835 Partition Map Scheme : Unformatted In the Disk Utility:
It doesn't give me the option to Verify or Repair the disk. I tried erasing everything and reformatting it in Mac OS Extended (Journaled) format. It stalls on "Unmounting disk" for a few minutes then proceeds with another error: "Disk Erase failed with the error: Unable to write the last block of device" - and sometimes the harddrive would just randomly eject during this process. It wouldn't let me partition the drive to any parts (not even back to one). It also wouldn't let me restore I booted My MacBook into Windows 7 Home Premium and plugged in the harddrive. Again, Windows couldn't install the driver properly and thus, it didn't show up on "My Computer".
I'm assuming the hard-drive is corrupted. The hard-drive was working fine before all the formatting and partitioning - in a Windows format, I think. What might be the problem and what can I do to format and/or recover files from the corrupt hard-drive?
Info:
MacBook Pro, Mac OS X (10.7.4)
Why do I keep getting "the disk you inserted was not readable by this computer" caution message when I don't have a disk inserted???
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3), Imma new mac owner.
So just starting today, I plugged in my WD Passport which I have used COUNTLESS times. Now I am getting a notice that says:
Disk Insertion
The disk you inserted was not readable by this computer.
Initalize, Ignore, or Eject
This is a strange one... I have a Powermac G4 running tiger.. now i needed to make a clean install of tiger and start again, which i did with absolutly no problems. I plugged my NTFS formatted HHD to the mac and it came up strait away. brilliant...Then i went though software update and installed the nessasarys and restarted the machine and this is when the problems started... computer turns on and instantly tells me that the device is not supported.. bugger.. i tryed everything to get it going but nope it wasnt having it. I made another fresh install of tiger, got everything going and the HDD showed up, made the updates and HHD wont read again....
Info:
Mac OS X (10.4)
I am installing an operating system through Virtual Box (a free alternative to VMware fusion) and I do not have a DVD/USB drive large enough to burn it to, so I need to make the ISO readable like a DVD would be for the program. I'm missing minesweeper.
View 1 Replies View RelatedSo, yesterday I moved my wife's iPhoto library to her WD external HD so she could install Snow Leopard on her iMac. Today I get home and she meets me in the driveway telling me that her HD fell of her filing cabinet and the computer won't recognize it. I take a look at it and here's the message I get when I plug it into the computer: <Red Stop Sign w/ "!" in the middle>
The disk you inserted was not readable by this computer. (Initialize...) (Ignore) (Eject). I am hesitant to click the (Initialize) button for fear of an accidental formatting which would subsequently erase our iPhoto library (ALL OF OUR PHOTOS -> 90GB of photos). Because Mac enthusiasts are the ultimate community and are very resourceful on the whole, I felt it would be most prudent to put this query to the monitors of these boards.
So I have several external Harddisk that I formatted with NTFS-3G via the Disk Utility App on my Mac. I worked with the HDDs for weeks on my Mac without a problem. And now I brought the Harddisks to a friend and none of them can be read by Windows XP?!
We tried on several Machines, none seem to be able to read the NTFS-3G formatted HDDs. They're also not broken since they still work the second I plug them back into my MacBook.
So did I do something wrong? I also can't find a NTFS-3G driver for Windows.
It would kinda defeat the purpose that Windows can't read NTFS-3G...
I have previously saved Photoshop and Freehand files from my old G5 onto an external HDD. When I recently tried to review this data on my Mac pro it is showing up as EXEC files, whichseem to be unreadable? I am a little confused as to why this has happened and would like to know is there a way to retrieve these files so I can attempt to save them in their correct format?
Info:
Mac Pro, Mac OS X (10.6.7), 2.66ghz 4gig ram 750gb HDD
I've suddenly come across a problem, which I'm not sure I understand at all... My Macbook Pro has stopped being able to read PC burnt data CDs. CDs that have previously worked. I get the "The disk inserted was not readable by this computer" error. They work in my old PC laptop, BUT, I booted up in Boot Camp on my Macbook Pro and it only saw the CD as a blank CD, so I'm guessing it's not an OS problem.
Just to make things even more clear, PC burnt audio CDs STILL work, and Mac burnt data/audio CDs still work. So it also doesn't seem to be a problem with the optical drive itself.
I installed a hard drive to a new Mac Pro, the physical install went fine. When I booted the computer, it said the drive was not readable or usable or something along that lines so I went to disk utility and erased the hard drive with the Mac OS Extended (Journaled) setting selected. Now the drive seems to work fine but I haven't tested it much. Is everything ok with this drive now? Is Journaled the best setting? Is there a better setting to use for video editing. The drive is: WD Caviar GP 500 GB SATA
View 5 Replies View RelatedI have saved about 300 photos on CD from a Windows Vista PC in PSD and JPEG formats. When I tried to insert the CD to my Macbook it says that it is not readable. Is there any way I can get the files to work on my Mac Photoshop or any other programme on Mac?
View 2 Replies View RelatedI was wondering if anyone knew this one. I accidentally removed my flash drive without ejecting the other day, and now when I insert it into any Mac, it comes up
Quote:
The disk you inserted was not readable by this computer
When I open disk utility, it looks like the attached. I can't "Repair" it, can't erase it, nothing.
I want to completely reinstall my SL onto my MBP just to have a fresh start and 0 out my hard drive. I've already backed up all my important files and everything I need, but when I put in my SL disc it tries to read it and then just kicks it out of the drive without ever showing up on my laptop. It is not the disc I used when I upgraded my MBP from 10.5 to 10.6 though because I misplaced and cannot find that copy, but I am using a friends copy (I don't think this is the problem). I know my drive should read it because it reads every other CD I put into it and it shows up on my friends MacBook as well.
View 4 Replies View RelatedI have a MBP from late 2010. And for the past 6 months i have had problems with it trying to read any SD card I put into the card reader and it's really causing me problems. I've tried the iPhoto trick and inserting the memory card plenty of times with no success.
Info:
MacBook Pro, Mac OS X (10.6.7)
How can I zoom in iTunes text? Everything else on my multiple macs is fine. But iTunes will never enlarge it's tiny text! (Men have size issues, but iTunes is happy with its insignificant size!) Help? Or Hey! Apple! Get with the program! (no pun)I just want that little text to grow! What good is a huge monitor if I have to be 3 inches from it to use it?
View 2 Replies View Related