On my 2009 I've noticed now that after using bootcamp for a bit then booting back into os x that i have no sound available, there's no sound devices in preferences. This is using the line-out jack.
View 1 RepliesThis started happening randomly earlier tonight, and I haven't managed to find a fix just yet.I was encoding a video file for quite awhile (I don't think that parts important, but I thought I'd include it anyway) and then I tried to play a youtube video. I noticed there was no sound, so I tried to up the volume using the Volume Up key on the keyboard. The volume visualisation appeared on the screen like normal (albeit a bit laggy), but the sound still didn't change, neither did I get the usual 'click' noise you get when you change the volume.I went looking into the sound options in the system prefs. only to find that the Output Sound device was headphones. For a test I plugged in some headphones to see what happened and, low and behold, the Output Sound device changed to the Internal Sound and my speakers were working again, but only with the headphones plugged in.
View 1 Replies View RelatedI frequently have to switch my sound output device from Line Out to Headphones. I know all about the Option-Click of the menubar icon, but what I really want is to assign a hotkey to cycle through them (similar to the alt tab program scroll) when I can't easily get up to cross the room for my mouse.
If it helps I use a Logitech DiNovo Mac edition keyboard. I've looked all through it's prefpane but it doesn't have an option to switch sound outputs. If there was an unknown keyboard shortcut to switch outputs then I could easily just assign it to an Fx key.
i just noticed that i no longer have a output sound device..is there anyway i can get sound back or do i have to nuke it?
View 2 Replies View RelatedI have Mac Pro with Digidesign/ProTools interface connected. I sometimes switch sound output from MP to run through the digidesign hardware. I'm getting message right now saying "selected device has no output controls", not allowing me to switch. I rebooted with the interface already turned on. I've run into theis before- can't figure out what causes this to happen. Sometimes it's OK. ?
View 3 Replies View RelatedI lost my macbook speakers sound after instalation, there is grey icon and I can't control volume. Please let me know all possible ways to resolve problem. Btw,after reboot I heard sound when mac loads, and its working when I using headphones. When I start iTunes, and plug out head phones there is a red light. When I close iTunes red light disapears. But no sound at all.
Info:MacBookPro, Mac OS X (10.7.4)
I have a macbook pro and the audio on it the other day was perfect. Now i cant get it to work. It wont let me un mute it and under system preferences it says that no output devices are available.
Info:
MacBook Pro
I have a problem about sound. It's no output or input device when I install parallel desktop 7. Is there any way that can solve this issue without uninstalling Parallel Desktop?
View 2 Replies View RelatedMacbook Pro Sound has suddenly stopped working
The Sound Settings show no output device. When trying to adjust the sound a circle with a line through it appears. Cannot run the volume adjusted up or down either. Also the sound does not work with a headset either. Have tried PRAM and SMC rest as well as plugging and unplugging headset. Running 10.9.3. Was running fine yesterday - feels like it may be hardware problem?
I recently installed Vista 64 via Bootcamp 2.1 (OEM DVD that came with the machine) ... everything works fine (Video / Display / iSight / Trackpad / Keyboard) except .. there is NO SOUND!!! I downloaded the Realtek drivers from their website .. but still no avail! The Speaker Icon indicates that there is "No Audio Output Device Installed"
Information:
MacBook Pro 17
Windows Vista
My sound keeps turning off. When I check the settings, the output device switches randomly between Internal and Digital output. I have no idea where the Digitial Output is coming from and this started about a month again. It switches randomly and then I loose all sound for a few seconds. Sometimes it happens once then stops for a few days, other times it switches back and forth for 5 min. No idea!!!
Info:
MacBook, Mac OS X (10.6.8)
Macbook Pro suddenly has no sound output. The menu for sound is greyed out. System preferences/sound doesn't alow me to set volume or mute.
Info:
MacBook Pro 2.2, Mac OS X (10.6.8), 4 GB
So I started up my macbook this morning and have been using it for awhile when I went to go play some music and can't get any sound. When I hit the volume buttons it shows a shadow of the speaker logo and a circle with a line through it under the volume bar. I have tried a restart and also went into sound controls, where it says "The device has no output devices" . What can I do/what's going on?
View 11 Replies View RelatedHaving gone through the settings, i have a speaker system plugged into my white macbook through the 3.5mm audio jack. I am running OS X Leopard 10.5.7 and am unable to find the options that i thought were available previously in tiger to configure the speaker setup/orientation. For example whether i am using satellite speakers, or 2 speakers either side, 3 4 or whatever it was, just like i would if i was using windows. It has a section under "Sound" then "Output", however it seems to be automated, i cannot add or remove, or edit items within the list.
View 3 Replies View RelatedI am using Logitech Z-5500s with my MP. Under the sound settings with digital optical selected, it says: "The selected device has no output controls." And at the top of the screen where it shows the volume, it is grayed out. And when I hit the volume up/down/mute button on my keyboard, it has a circle with a line through it. If I play a song on iTunes, sound comes out and I can control the volume through the Logitech controller like normal. But even when something is playing, it still won't let me adjust the volume through the computer.
View 10 Replies View Relatedmac book pro Mac OS X 10.6.8 processor 2.2 intel Core i7 Memory 4gb 1333 Vyz DDR3 Can't use sound - No device found says in Sound preferences pane?
View 3 Replies View RelatedI woke up this morning and tried to watch a linked video on a webpage. I saw the video, but there was no sound (this had not been a problem the evening before). I am using USB soundsticks, so I checked to make sure that they were plugged in, and they were. I opened iTunes and sound came through the Soundsticks; I switched to the internal speaker and it worked there as well. When I tried the same with another embedded video, however, I only got sound from the internal speaker.
Has anyone had a similar problem or does anyone know how to fix this?
I am about to buy a 15 in. MBP and I'll be going on a trip soon. I was wondering if there was anything I could get that would let me both use my mac as a tv for my xbox and use a tv as an additional monitor.
Something that would have RCA input/output (the red, white, yellow cords) and would connect to my mac with USB or hopefully firewire 800 (express card 32 would work as well).
I'm looking to use the speakers (Logitech X-540) with my laptop with 5.1... but this is an analog system (has green/black/orange inputs), and Macbook Pros only output with optical through mini-TOSLink. What's the best (read cheapest) device for decoding the optical output to analog?
If this won't work, I'm probably willing to shell out a bit more cash (Z-5500 perhaps). If you have a digital 5.1 system recommendation ($350 or less), let me know.
Manual for X-540 speakers: [URL]
i want to change my audio out put in to input device for record my not stop mix
View 4 Replies View RelatedWhen I start my Macbook Pro (mid 2009 15") I get the familiar audio chime. However, when it finishes startup and I get to my desktop, I have no audio, and the audio icon up top is grayed out. The audio output jack works fine. I can use speakers and headphones. I've tried the solution of wiggling around a headphone plug in the jack, as well as doing the same with a toothpick. I've also reset the PRAM. For some reason, the problem persists. When I open sound settings in preferences, the only device listed is "Digital Out" and there is a message under it saying "The Selected Device has No Output Controls."
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I recently purchased the LG BE08LU20 External Blu-ray Disc Rewriter. I installed Windows 7 (64-bit) through Boot Camp on my 27" iMac. When I try to play Blu-ray discs through the external drive on the Cyberlink PowerDVD software, it says that the software "is not able to play the protected content on [my] digital output device". Is there any way to fix this issue?
View 3 Replies View RelatedI recently bought an ACD which I hook up to my MacBook. I watch videos and movies on it late at night so instead of playing it through the speakers I prefer to play it through headphones so I don't keep everyone up.
This works great with iTunes. I plug them into my MacBook and off I go. For VLC, however, it STILL plays the audio through the speakers even though my headphones are plugged in.
How do I change it so the audio plays through the headphones when plugged in using VLC instead of the speakers. (Jeez, you'd think this would be basic functionality. >_>)
I picked up a really cool wireless USB speaker set and want to use it with my current gen iMac running Snow Leopard. Problem is that as far as I can tell, and I've done some searching, that it's either the USB audio, or my internal iMac speakers, one or the other - not both.
could use both outputs at the same time? Internal speakers and the wireless USB ones?
I just opened up my MacBook about an hour ago, and for some reason the sound output isn't working. System preferences are as they should be (mute is not activated). I'm assuming that this is a hardware problem, but am hoping that somehow it is not. It's completely mute, btw, no sounds of any kind. When I restarted it, no sounds when it booted up again.
View 1 Replies View RelatedIs there a way to have the sound output from both the built-in speaker as well as my line out speakers at the simultaneously on the Mac Pro? So far I've only been able to choose one or the other.
View 1 Replies View RelatedOccasionally after booting back into OS X from bootcamp (windows 7 home premium), I will not have any audio output devices. If I restart OS X again they return, anyone have what maybe happening here? This is on a 09 MP...
View 2 Replies View RelatedI've had a problem with my MacBook Pro (2008) for a while. If I connect a headset or external speakers, there will be no sound from the Macs audio output. The built in speakers is working perfectly. Do you have any idears what could be the reason? I tryed do reset the Pram but with no luck. If it helps there is no red light coming out of the macs output. The problem occurred when I connected a mini-jack for my speakers. Maybe the output thinks it's a S/PDIF and not a normal audio output?
View 2 Replies View RelatedMy speaker icon in menu bar has turned gray and does not respond.
Info:
MacBook Pro (17-inch Early 2011), Mac OS X (10.7.3)
Can the new MAC mini output sound over HMDI. I have an older mini with DVI and it cannot output sound so I am considering buying a new one if sound is supported.
Info:
Mac mini, iOS 5.1
