configured a new Mac Pro to run just Windows XP natively with NO OS X operating system, NO Bootcamp etc. I am trying to determine if I should sell my Mac Pro or if I can simply rebuild it using only Windows XP?
View 24 RepliesI just purchased a new Mac Pro (early 2009 Quad Core" 2.66 (2009/Nehalem), and a second (1GB) internal hard drive. I would like to transfer my the applications, files, and profile from my Macbook Pro (early 2008 Core 2 Duo" 2.5) to the Mac Pro. I also want to install with Boot Camp Windows XP Pro (SP3) on a separate hard drive. I want the XP drive to be the 640 GB hard drive that came with the Mac Pro, and the MacOS drive to be the added 1GB hard drive. I want the Windows drive to have 4 logical partitions ( C, D, E, and F) with the C, D, and E being NTFS (so they can exceed 32GB) and, F drive being FAT (for read/write compatibility with MacOS). I've been doing a fair amount of reading both on this forum and elsewhere, and think I have good plan to accomplish the setup. But, a lot of what I'm planning to do is new to me. So, before executing my plan, I wanted to get some feedback from the experts on this forum as to whether my plan is a good one, or needs some modification.
View 1 Replies View Relatedmy Windows 7 partition is FAT (not FAT32 or NTFS). Does OS X have native read/write support for FAT partitions? I had NTFS-3G + MacFUSE installed since day one, but if I don't need it, I'd like to remove it.
View 7 Replies View RelatedI have recently switched platform from Win XP machine to Mac (MBP w/ OS X 10.5.5). I have license for Photoshop CS3 on Win. Cost or switching to native Mac version of CS4 (can't migrate CS3... need to upgrade + migrate) is approximately same as purchasing Parallels or Fusion plus WinXP to run my current Win CS3 version. I am satisfied with CS3 and don't look forward to learning modified interface and tools of CS4. I think it will come down to speed. Will native Mac CS4 run faster than comparable program w/ Win on Mac (Parallels or VM Fusion)?
View 6 Replies View RelatedI've just started using USB Overdrive and Its great how you can remap every mouse button, but cursor movement still feels sluggish and mac-like.
Can someone please post (screenshot of) their settings for speed and acceleration that is required to achieve windows-like movement?
I installed windows 7 on Basecamp but I can't figure out how to configure it to work wirelessly with my airport base station. Is there a specific driver to install? If yes would it be on apple or windows website? If this helps I'm using an AirPort Extreme (0x14E4, 0x93) card that came with the MBP.
View 1 Replies View RelatedI recently upgraded from my MBP to a new i5 iMac, and with the new HD space I'm now able to use some valuable disk space for a windows partition. I installed WinXP (seemed fine in Boot Camp), and began the process of installing Parallels 5. I was able to create a virtual machine, but when I try to run Parallels it goes into a "configuring your virtual machine" window (Steps 1 of 4) that just seems to run and run (ran it all last night with no progress further than about 25%).
View 1 Replies View RelatedUsed migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
I want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
Maybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
View 11 Replies View RelatedI've just bought a copy of windows 7. Just wondering if i install it via bootcamp now can i update bootcamp in a few weeks when apple releases windows 7 support or will i have to reinstall windows 7 when that happens ?
View 3 Replies View RelatedA question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
View 1 Replies View RelatedIs there any way to get the wireless mighty mouse to work in windows 7 running via bootcamp tried to pair it but no luck.
View 7 Replies View RelatedDoes anyone know or have the same problem where pressing the F7, F8, F9 keys (which are previous, stop/pause, and forward) doesn't work in iTunes unless iTunes is the "active" window? I know that in OS X that if i pressed those buttons, it would do it even if I was in another application, but in the Windows 7 version it won't do it if another application is "active." Also, the same applies to the Apple Remote.
View 2 Replies View RelatedIf you set up boot camp with run windows and then also want to run windows with parallel, do you need two licenses of Windows to do this? Or can both programs access the same instance of Windows?
View 5 Replies View Relatedafter i get to the windows loading screen my mac just throws out a consistent high pitched sound and shows a black screen, i can only get into bootcamp windows when i unplug the computer and start it up with the running windows normally option. is this a virus?
View 7 Replies View RelatedSo I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
View 3 Replies View RelatedLast night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I have installed Windows 7 on a Bootcamp partition and use VM Fusion as well, I am trying to get my Windows 7 desktop onto my Plasma TV when I have only Windows 7 booted.
I have a mini displayport to DVI adapter (not worried about sound right now) but when boot into Windows I cannot find the TV as a output setting.
It used to be with my old PC I would see the TV as a possible output and I could chose either Dualscreens or simply set the Plasma as the main display.
Could someone please help me achieve this with my iMac? Am I missing a driver or just missing a setting?
Basically, I created a BC partition for my W7, however, I only gave it 32gigs of space (I only wanted to use it for gaming).However, now I want to install Autodesk 3D Studio Max 2010 on W7, however I don't have enough space on my BC partition to do that...I've researched enough to know that I will need to use one of the following programs:I've read up on all the programs and done some research on them.
Ive noticed most people are having problems with all of these programs when trying to backup a W7 image whilst on Snow Leapord (Mac OS x 10.6, which I am running)I know that is the function of the 3 applications above... But to my knowledge... In theory - I should be able to just backup my W7 using a reliable backup program (Can someone recommend any?) and then delete the existing BootCamp partition, create a new one of 100gig and then just load up the backed up image for Windows 7...
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
So I thought I was a know it all and thought I could remove my Windows partition without reading the instructions. Typically one would do the following:
1. In Mac OS X, quit all open applications and log out any other users on your computer.
2. Open Boot Camp Assistant, in the Utilities folder in the Applications folder.
3. Select "Restore the startup disk to a single volume" and then click Continue.
However, I messed it up. Instead of going through Bootcamp assistant, I went through Disk Utility and "erased" the Bootcamp volume. Now I am not sure where I at? I erased it, but you can still see the Bootcamp volume listed. And now when O try to use Bootcamp assistant to remove the partition I get the following:
The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS extended (journaled) volume or already partitioned by boot camp assistant for installing windows. I want to reinstall a Windows, but want to start fresh.
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
View 7 Replies View Relatedyou cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies View RelatedI occasionally get the BSOD sometimes on the Windows XP side of things in Boot Camp. I always use a mouse on the Windows side, as the trackpad is very glitchy and buggy. Sometimes, when I use the mouse for a prolonged period of time, I accidently touch the trackpad forgetting all of the sudden that i had the mouse (or i use it to scroll down) and the whole thing blue screens on me. It has happened 8 times already, each time blue screening after touching the mouse. I don't know why, but I find out that the mouse drivers are the one that is messing up my Windows XP SP3.
View 1 Replies View RelatedI have a Macbook Pro 15" , C2D 2.33ghz. I have the 7100 version of Windows 7 and everything worked perfectly except for the sound.
No matter which bootcamp driver I try or even Realtek's own vista one nothing works.
I downloaded the bootcamp 2.1 drivers and everything installed correctly , including the realtek ones. All the hardware looks fine in device manager but I dont hear anything out.
Should the default be speakers? It seems that it keeps the driver as microsofts own and it doesnt say anything about realtek. Could that be the problem?
I did not try the microphone jack yet but will in a few minutes.
Even if there is a hack , Im willing to try it. What is the exact audio chipset on this model of macbook pro?
Basically I want to do this: Take my 80 GB External HDD, reformat it to MacOSXExtended (Journaled). Put leopard on it. Boot from my external HDD. Run BootCamp Assistant and make a windows partition on my external HDD via bootcamp.
View 2 Replies View RelatedSo has anyone tried the new Bootcamp 3.0 drives off the Leopard disk with Windows yet? Do they support Windows 7 now? Any improvements to battery life, heat, etc?
View 9 Replies View Related