Mac Pro :: Broken Spinning Disk Icon Display At Start Up Then Stalls
Feb 12, 2012
This morning I woke to a spinning disk icon on my 2007 Mac Pro. I've restarted it several times but can't get past that part. Also of note is that is the graphics displaying the spinning disk icon is broken up as if the video drivers aren't properly installed. I don't have a second Mac to run a diagnostic. I'm down to my iPhone 4 for Internet resources.
Info:
Mac Pro dual 2.66Ghz Intel Xeon, Mac OS X (10.7.1), 2x 1TB, 1x 500Gb, 1x 80Gb, 3Gb ram.
View 14 Replies
ADVERTISEMENT
Apr 21, 2012
Yesterday I had to reinstall Leopard on my Mac. Everything was going fine until a little while ago I turned on my Mac, and after the startup sound and a few moments of the grey Apple, a No Access symbol appeared - or a "broken folder" icon as they call it in the support pages. Suffice to say there was a panic after the events of yesterday and I made several attempts to restart, but the "broken folder" icon keeps appearing and noting happens. I have been able to boot to an external drive.
I first tried to reset NVRAM and reselect startup volume, by holding down X on startup. It showed me a message - "efiboot loaded from device.....error loading kernel". I then tried resetting the PRAM and NVRAM - [URL] - but this just brought up the "broken folder" icon again - and if left for long enough a grey folder icon with a ? on it begins flashing on the screen. As best I can tell my only remaining option is to reinstall Leopard.
View 8 Replies
View Related
May 17, 2012
My Mac Pro (Intel) suddenly wont start up. It is stuck at the white Apple screen and spinning icon.
Info:
Mac Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Jan 1, 2011
I have Mail and have two imap google mail accounts linked to it. One account is running completely fine but the other account has a gear like icon and it just wont go away. Its not trying to send anything out at all. But that icon just wont stop. Its taking a small amount of internet speed with it too.
View 1 Replies
View Related
Jun 20, 2012
How can I get snow Leopard onto my MacBook Pro, when my DVD drive is broken and my MacBook won't start?
Info:
Mac OS X (10.6)
View 6 Replies
View Related
Sep 9, 2009
my problem: IBook G4 that recently on reboot is just sitting on the grey screen with the spinning icon as seen here:
what i have done: basically followed apple's tips here
1- booted into safe mode; no change
2- booted into safe mode with shift-command-v to watch the boot; and it just loops around and around; no change
3- reset the nvram/pram; no change
4- booted into single-user mode; ran "fsck -fy" and returned with no errors and "...OK" and rebooted; no change
5- would move on to using my boot disc, however, here is the difficulty- my cd player gave out a bit ago and never replaced it.
so any suggestions? put in a new cd drive? would it recognize it? bring it into the store? i have searched around and haven't seen what to do in my kind of case.
View 5 Replies
View Related
Jun 4, 2012
Anyone know what this rotating icon belongs to? And why does it continue to come onto my screen periodically and stay there until I reboot? Just to return again at a later time?
Info:
iMac, Mac OS X (10.7.4), iMac 27" Intel (2009)
View 3 Replies
View Related
Oct 15, 2008
Just today I've noticed that the time machine icon in my menu bar won't stop spinning. Finally, I clicked it and it says that it has been "preparing backup" all day long. I stopped the backup just to see if it was a one-time glitch. One hour later, the same thing happened. I gave it thirty minutes and the entire time it said it was "preparing backup"
How can I fix this? I already tried turning TM on and off, that didn't do the trick.
View 2 Replies
View Related
Jul 18, 2009
I have a Mac Mini that my sister gave me because she said it stopped working. She said she wanted me to get all her photos off of it. Its a Model A1176 1.66/2X512/80/COMBO/AP/BT I tried playing with it and it powers up, shows the Apple on a grey screen with a spinning little icon.. It does that for about 30 sec and then turns off. I opened it up, took the hard drive out, put it into an external USB case and hooked it up to my Windows PC and loaded MacDrive 8 software. Got the drive to be recognized on the PC and backed up all her photos.
View 20 Replies
View Related
Jan 21, 2010
Any ideas how I might get my MB to start. I open the cover and press the powerbutton. The wait-state icon comes up and spins and spins and spins.
View 4 Replies
View Related
May 3, 2012
My screen just has the apple icon and the spinning circle - wont log on.   Lost power without shutting down
View 1 Replies
View Related
Aug 27, 2008
Running 10.3.9 on a G4 iBook, suddenly started getting a verrrrry slow start up. Everyting fine up to the log in screen, choose user, enter passw, go through bits of blue screen right up until the wallpaper loads then, bam, on with the brakes. Spinning beachball, plus date, time, battery, language, volume, intnet connect, applescript and network icons all appearing one by one, very lazily, with no menu bar behind them. Takes a good couple of minues, thereafter everything ok. This doesn't happen when I reboot in safe mode. I've got about 30pc hard drive available, run a few bits of basic maintenance, but so far nothing.
View 5 Replies
View Related
Feb 7, 2012
I was installing latest update of OSX and lost internet connection now laptop will not start just see Apple logo and spinning wheel.
Info:
MacBookPro, Mac OS X (10.7.3)
View 1 Replies
View Related
May 28, 2012
Cannot log on-perpetual spinning wheel.How can I re-boot?
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), iOS 5
View 1 Replies
View Related
Nov 28, 2008
I changed the permissions from read only to read and write on my start up HD and chose the change everything inside option to read and write. After I did this, my secondary HD no longer allowed me to use it saying I did not have permission. When I tried to change it all selections were in custom mode and would not accept my changes. Same with my main HD.
I rebooted and the grey screen shows up with icon and no spinning wheel. I tried safe mode...same thing. I even tried booting off my back up firewire drive and got a null sign on the grey screen instead of an apple icon. Booted up from the G5 disk and tried to run utilities permissions repair and it would not do it, gave me an error, "No valid packages". Ran disk repair and it said nothing needs repairing. I then booted up using Disk Warrior and rebuilt the HD's directory successfully, but still the G5 will not boot past the icon grey screen, no spinning wheel. I'm spinning though...HELP, I'm dying here. FYI this is a G5 dual core Cypher running Leopard with 3.5 gigs of ram. The start up HD is 250 gig and the secondary is 500 gig
View 2 Replies
View Related
Jun 20, 2012
I had LogMeIn installed on my iMac and it worked fine for a while. Then the icon for the program in the menu bar at the top of the screen went gray. When I hover the mouse over the icon a spinning pinwheel appears, so I can't click the icon to start the program. I deleted the program and then reinstalled it, but the gray icon and spinning wheel never whent away. how to delete the spinning wheel
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Nov 13, 2010
My MacBook Pro (The oldest one, I believe) won't start. After OS X 10.6.5, it will sit at the grey screen with the spinning gear. Safe boot does the same. Verbose mode shows it stuck at "vmnet: netif-vmnet8: Adding protocol 2." I can boot off the install CD and single user mode
View 1 Replies
View Related
Feb 13, 2012
While updating to the newest version of OSX I got a spinning ball. After two hours I decided to shut down the system and boot again. But now the spinning ball start spinning at start-up. what to do?
Info:
MacBook, Mac OS X (10.7.2)
View 1 Replies
View Related
Apr 10, 2012
My iMac does not start up as usual. I now get a ' start up disk is full. You need to make space available on your start up disk by deleting files' message. Â I am able to key my log on password however I just get the purple galaxy screen with no desktop.Â
If I try to use the keyboard I get a tone when pressing the keys. Â
Has worked perfectly well up until I got this dusk full message. Â
View 2 Replies
View Related
Nov 9, 2010
Im trying to rebuild a 20inch g5 imac. While replacing the bezel today i removed the screen and broke the pins that connect the connector from the motherboard. Can this be repaired or must I purchase a new screen?
View 1 Replies
View Related
Mar 20, 2012
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
View 3 Replies
View Related
Mar 21, 2012
My MacBook pro freezes at start up at the gray screen with spinning gear. I did a firmware update yesterday and this happened upon restart. MacBook pro purchased new early 2011 lion
Info:
MacBook Pro, iOS 5.1
View 6 Replies
View Related
Apr 24, 2012
I have a very old IMac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago. Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel. I tried many times off-on, hold down the apple function key but none worked. I no longer have the rebooting CD with me. I wonder whether the computer can still be saved? I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files. I think it's tiger or earlier that it's using.
Info:
iMac, Mac OS X (10.4)
View 1 Replies
View Related
Sep 1, 2009
Alright first of all, Hello to you all, I've been reading this forum for a couple of month even though this is my first intervention and i need a tip. Alright my situation is the following: I have:
-Macbook Pro Unibody
-Macbook C2D
-Snow leopard Disc x2
-Snow leopard image I cloned to a hard drive partition.
The situation is I have bought two licenses for Snow leopard because i have two macs. The macbook pro is the computer i use everyday and is fully functional. The macbook however took a big drop about a year ago and the display was totally broke along with the DVD and the hard drive. I retrieved an old HDD i had with leopard installed and put it in the macbook along with an external display and i now use this computer as a media center. The problem is i want to install snow leopard on it. The DVD drive is broken hence the reason i made a disc image and i wanted to install from the disc image. SO i restart the macbook with the alt key and as expected, the image from the usb drive is detected and i launch the install. The problem comes from the fact that when the installation starts, the external display is set as secondary display and i cant control the installation which is displayed wont eh broken display. Is there a way to remotely install SL or to set the external display as only display at boot through holding a bunch of keys?
View 3 Replies
View Related
Jul 27, 2010
The weary saga of an unhappy Macbook Pro. I helped my mom buy a 2.2Ghz Santa Rosa MBP from a fellow I know who was upgrading. Decent shape, but apple care was expired: $500. All was good until she dropped it and cracked the display. She brought it with her to visit me and see about my replacing the screen. My daughter went in to say goodnight to her the other night and knocked a can of seltzer on it! Now the keyboard is not working. The computer boots up fine, runs applications fine, works with an external monitor and the trackpad works, but only a few keys work and those that do repeat.
So, the screen: replacing screen seems to be $200-250 in parts plus my labor (ifixit tutorial looks daunting! I'll replace a HD any old day, but this makes me a bit apprehensive) or $350 labor included from techrestore site. The keyboard: A replacement keyboard from ifixit is $87. Is there a way to tell if it's just the keyboard or a problem on the logic board other than taking mine apart and swapping out parts (I have the same model)? Is the screen replacement that difficult? I'm reasonably capable, but it looks daunting. Putting $3-450 into the computer seems to be still worth it since she can't afford a new computer (not even this really) and other than the replaceable broken parts it's still a solid machine.
View 5 Replies
View Related
Apr 17, 2010
Macbook Pro 15". Product #: Z0GG
Backstory: Sunday the updates window popped up so I let it run and reboot. Boot screen is stuck on the white screen with apple logo and spinning icon. None of the typical hotkeys were working like the Shift key to go to Safe Mode. I decided to resinstall Snow Leopard which went perfectly fine since I was able to boot off of the Install DVD. Everything seemed fine after the install and I had all of my previous programs and files.
It worked fine all day yesterday until I shut the lid to leave work. I got home, opened the lid and the spinning mouse icon was continuously spinning. I could move the mouse but couldn't click anything. I shut it down using the power button. Upon booting it up I did not hear the boot up sound but a white screen displayed and didn't do anything from there. I rebooted it again, inserted the Snow Leopard DVD to try and boot off of that and it won't even boot off of the DVD. None of the typical hotkeys work either, not even to eject the DVD. I do hear the DVD spinning up but it doesn't do anything; just a white screen.
I did reset the PRAM which forced it to reboot and I got the startup sound back but it still only shows a white screen. Any ideas? I forgot to purchase Apple Care last month before my 1 year warranty ran out so I'm 1.5 months out of that.
View 10 Replies
View Related
Feb 5, 2010
my 2006 macbook has not been able to start. First it didn't even have the chime, then I read through some threads in this forum and figured out that one of my RAMs was not properly put in. I fixed that, now I get the chime, the apple sign, and a spinning wheel and I am stuck there forever.
I tried:
resetting PRAM, didn't help.
start from safe boot, still stuck with apple sign and spinning wheel.
boot from installation CD by holding either the "C" or "D" key, it would not start from the CD.
Curiously, I can start it in Windows and I am using Windows right now. Some threads said that it could be a hard drive problem, but if I am using Windows, does it mean that my hard drive is fine?
I've already spent 800+ fixing the logic board in 2008 b/c of a water spill and really don't want to spend any meaningful amount of money to fix this 1000 bucks or so laptop. If any hardware is in jeopardy, I'd rather just throw it away. However, I would like to at least be able to start it in Mac OS once so that I can back up my documents.
View 5 Replies
View Related
Apr 9, 2012
I have an intel imac - can't tell you much about the details as I can't get any info out of it. I installed snow leopard about a year ago - no issue since then other than occassionally the screen goes black but nothing major.Yesterday, I backed up to my usual passport backup and then today, it froze. I couldn't turn it off or restart at all so resorted to the power button. Since then, I can turn it on, it goes to the grey screen (no blue screen) and I get the apple logo and the spinning clock/wheel. For hours and hours....So, I tried one of the apple support pages and worked through - peripherals, safe boot, NVRAM, PRAM, tried to reboot with mac osx disc (the original not snow leopard) - nothing. Absolutely nothing changes - same old grey screen, apple logo and spinning clock/wheel.
Info:iMac, Mac OS X (10.6)
View 6 Replies
View Related
May 29, 2012
My App Store application on 10.7.3 is not opening. The wheel keeps spinning but does not display anything. The icon for the App Store in the Dock shows there's 5 new updates but I can't access this because the app itself is not opening.Â
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 1, 2014
10.9.4 has failed to fix what was fine in 10.9.2 and broken starting with 10.9.3 -- a display (Dell U3011) connected to a Mac Mini mid-2011 via either a DisplayPort cable or dual-DVI adapter suffers from frequent loss of signal. The elsewhere-prescribed-juju of changing spaces, unplugging and replugging cables, ... works randomly and for short duration.Â
HDMI connection works (producing non-native resolution on the U3011).Â
This was filed as bug 17083693 and closed as a duplicate of 16197028.
View 5 Replies
View Related
