Mac OS X Lion Server :: Host Name Is Invalid
May 24, 2012
I have gone through the setup of my newly installed lion server software. I setup a server.example.private host name and have turned on file sharing, and VPN. I bought the server software so I can access my host computer from my IPad and a windows based laptop. When I attempt to setup the profile manager I get to the screen in the directory admin setup that asks for the host name and password, etc. The name and host name are already populated with a generic names and the password fields are blank. Whether I leave the generic fields blank and try and enter a new password or change the generic fields and password to something new I get the same error message every time. It says "Computers host name is invalid. The host name does not resolve to any configured address on this comp. ensure the host name is correct. How do I find out what the correct host name is for my computer?
Info:
Mac Pro, Mac OS X (10.7.4), Lion server
View 9 Replies
ADVERTISEMENT
May 5, 2012
I'm trying to setup mail on Lion Sever (7.3). The only way I can get it to accept incoming mail is to specify the whole FQDN of the server in the address.For example the domain name is example.com and I have a user set up called john. Sending mail to john@server.example.com works.
But sending mail to john@example.com (which is what I want) returns an error:
554 554 5.7.1 <john@example.com>: Relay access denied (state 13).
For internal DNS, I have:
example.com - primary zonemail.expample.com - alias server.example.comserver.example.com - 192.168.1.2 [URL] - alias server.example.comMX record [URL]
I see references here to problems in mail on 7.3 but not this specific problem.
Info:
Mac OS X (10.7.3)
View 3 Replies
View Related
Feb 21, 2012
I have a machine running OS X Server v10.4.11, and I'm trying to export some NFS mounts. I have the intended shared directory (a folder called NetBackups on a disk called xRAID L) added in Workgroup Manager, with access set to "World", but if I issue the command to another OSX machine (IP has been replaced with 0s) "sudo mount -t nfs 000.000.000.000:/Volumes/xRAID L/NetBackups test", I get an access denied error.
View 3 Replies
View Related
Apr 20, 2008
having a problem connecting to my built-in FTP server. I can connect to it from the macbook pro it is running on by using my IP address or my loopback address. however when I try to connect to it from another host (on the same subnet as my MBP) I can't. My MBP just doesn't respond to the connection attempts. I ran wireshark on my MBP and it shows that it doesn't respond. I can see the SYN packets coming in but no SYN/ACK packets are sent back.
View 5 Replies
View Related
Mar 15, 2010
I have iWeb '08 which i have not used since buying my Mac over a year ago.
Now i have to put a website together but do not know if can be 'published' to a host server via FTP or another method?
View 8 Replies
View Related
Apr 2, 2009
Following an online video to learn the proper directory structure, I saw that the author was not running it through MAMP but the local Sites Directory.
View 2 Replies
View Related
Mar 26, 2012
How can I host web messaging based on XMPP on my OSX server?
View 4 Replies
View Related
Apr 2, 2012
Woke up this morning, flipped open my MBP, and I see an Error Message that says that the Certificate is Invalid for SMTP Mail server. I looked, but it says it doesn't expire until 2014. So why does this message happen and what does it mean? I quit Mail, and then Restarted anyways to see what happens and all seems to be OK. But what does it mean and where does this message generate itself?
View 1 Replies
View Related
Feb 7, 2012
I have 4 Discs.Mirrored raid sets One Raid Slice is 'System Mirror'One Raid Slice is 'Data Mirror' There is a lock symbol on all 4 discs. Status is online. I can't delete the raid sets. I can't unmount them. I am the admin but the Disk Utility says "Deleting RAID set failed. Deleting RAID set failed with the error: Invalid Request"
Info:
Mac Pro, Mac OS X (10.6)
View 6 Replies
View Related
Jun 22, 2012
I'm having some trouble with my Macbook. It's running on Leopard 10.5.8. I recently tried to partition my hard drive and while doing so it prompted me informing me that there was an 'invalid node structure'. I could then no longer proceed with the partition. I had planned on updating my OS to Snow Leopard. I wanted to partition my internal HD, so I backed up some files on my external HD. I basically wanted my interal HD to run smoothly with a new OS while minimizing the space used. Now I've come across this issue where there is another message being prompted that says, 'invalid sibling links on hard drive'. I found THESE steps on another forum that informed me that this might restore the hard drive back to a readable/functional state but that didn't work either:
(These were the steps I took and nothing happened except another prompt informing me of an 'invalid node structure')
Boot off the OS X CD (reboot, hold C while booting).The installer will load up, go to Utilities in the menu and run Terminal.Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2.Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on.Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step.
I then stumbled upon a few different forums mentioning something about Disk Warrior. I was wondering if THAT would resolved this issue. Honestly, I don't really want to spend much money on buying this but I WILL buy a new hard drive if I ABSOLUTELY need to. I was just trying to see if I can troubleshoot this before I decide to throw in the towel and buy a new hard drive or attempt to try out this Disk Warrior thing.
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
View Related
Mar 21, 2012
Whenever i log into my terminal i noticed that i see that my hostname says unkown040ccedf8e88: ny name, is this normal? because i know that my friends MPA's have a different host name, and when i type in "hostname" on terminal, it gives me that unkown###
Info:
MacBook Air, Mac OS X (10.7.3)
View 2 Replies
View Related
Feb 2, 2012
Does anybody know the host and ip address of where the apple software update is downloaded from under software update
As little snitch is showing that it is coming from this Ip address :178.79.201.156 Port : 80 Host : cds73.lcy.llnw.net Which belongs to RIPE Network Coordination Centre which is in Amsterdam
Info:
iMac, Mac OS X (10.7.2)
View 1 Replies
View Related
May 10, 2012
After I upgraded to 10.7.4 I receive popup windows informing that: This computer's local hostname "ComputerName" is already in use on this network. The name has been changed to "ComputerName-1.local" every time my Mac wakes up. The number at the end of computer name increases every time I wake my Mac Pro up.
- Disk permissions repair brings no errors.
- After Mac restart - the same result
- As before I use both LAN and WiFi connections with LAN in higher priority.
Info:
Mac Pro, Mac OS X (10.7.4), 6Core 3.33GHz 24GB 4x3TB HDD+SSD
View 14 Replies
View Related
Apr 11, 2012
When I turn away from my MacBook Air to do something and turn back, I find the machine in standby mode (blank screen). I press the power button to restore access, provide the login password to re-join my "sleeping" session. I'm then presented with a "list" of one Wireless host which I must select, then "join" before I can proceed to use my browser etc.
Is there a way, that I can eliminate the tedious task of specifying from a list of one then explicitly "joining" the network? I'd think there would be an option to "always join this network if available" option that would make life easier, but I have not a clue as to where I would set that.I'm admittedly new to the Mac OS (10.7.2) and the Mac experience in general.
Info:
MacBook Air, Mac OS X (10.7.2)
View 2 Replies
View Related
Feb 2, 2012
Hardware: Macbook Air (Mid 2011) - 256 SSD OSX Version: Lion 10.7.2 Trying to update to 10.7.3. System Update downloads then fails to install (can't remember exactly what it said but I think something about the file not being valid) - tried twice Did startup with cmd-R and used Disk Utilities to repair permissions (twice), also verified disk. Repair permissions did show:
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired Following Disk Utitlties repair did safe mode boot Tried to use the combo update, but get invalid cheksum - tried three times
Info:
Mac OS X (10.7.2)
View 5 Replies
View Related
Feb 23, 2012
I have 3 occurrencces of the same NAS one of which works perfectly, How do I remove the other 2? I have tried previous posted solutions but they keep on returning - I guess because the IP Address is valid and the device active. There must be a system file I can edit??
Info:
iMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 21, 2012
I have downloaded xcode 4.3.2 three times into two different computers. Each time I try to open the file I get an error message: invalid check-sum.
Info:
Intel iMac 20 inch, Mac OS X (10.7.2), 4 GB; 2.4 GHz; 256 GB SSD
View 3 Replies
View Related
May 10, 2012
I've tried downloading OSX Lion from the App Store about 4 times one of them was while it was hard wired directly to the modem using Verizon Fios service. I've tried creating a thumb drive without sucess several times and keep getting a "Restore Failure, invalid argument" error message. The dvd (dvd-r) I was trying to burn I get a "invalid checksum" error message and won't burn also. what I can do to get myself a burned copy of Lion so I can slick my hard drive and start all over?
Info:
iPad 2, iOS 5.0.1
View 5 Replies
View Related
May 11, 2012
My Java application has begun spewing out the above error message after I upgraded to 10.7.4. Does anyone know what the problem is? My Java platform directory is:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/
Perhaps Apple changed something that requires that I get a new JDK version? If so, where can I get it - I don't see a new one?
View 4 Replies
View Related
Feb 19, 2012
I have a server in our DMZ that connects to Active Directory LDAP server (non-ssl over 389) but no objects actually show up in the directory editor. I get a green light in my Network Account Server, but queries against LDAP return no results. My end goal is to be able to dictate to Profile Manager what LDAP groups are allowed to enroll devices. I tested on our internal network on a test server and get the same results. Anyone have any luck connecting a Lion Server to LDAP and actually being able to view and utilize users and groups?
Info:
Mac mini, Mac OS X (10.7.3), Server
View 1 Replies
View Related
Mar 14, 2012
My sister has former eMail addresses which are no longer functional. They are NOT in the Address Book app. Yet one of them always comes up as the default. Yes, her current address is already in the Address Book app. I'd like some way to permanently delete her two non-functional addresses from system memory.
Info:
Mac mini, Mac OS X (10.7.3), 2.26GHz Intel Core 2 Duo, 2GB RAM
View 3 Replies
View Related
Apr 16, 2012
I have 1 tb data drive on server for student files but only using 40gb and says out of space. I cannot figure out where the space is located.
Info:
Mac Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
May 2, 2012
I have installed Lion Server with Web and Profile Manager services. When I log into the profile manager web page I receive the message "Not Found The requested URL /wiki was not found on this server."
Info:
Mac mini, Mac OS X (10.7.3)
View 3 Replies
View Related
Feb 9, 2012
I recently updated my Server running 10.7.0 to version 10.7.3 and single-sign-on no longer works for my users. The 10.7.3 Lion Server System is bound to our Active Directory Server running on Win2003 R2 Server. I tried un-binding and rebinding the system but.. no luck. When a user now tries to login to our shares via AFP with SSO credentials they recieve the message
I can run the id command from terminal on the OS X server and it is seeing AD users. Unfortunately, no one can log into the server shares via AFP with an AD user.
Info:
Xserve, Mac OS X (10.6.6)
View 3 Replies
View Related
Mar 12, 2012
I am desperate for help because whatever I do I cannot get my own certificates to work. When I first set up Lion Server a so-called Intermediate CA and a corresponding SSL server certificate was automatically installed and that works fine. Now, I wanted to create my own Certificate Authority (CA) and a leaf SSL server certificate.[URL]First I created my own CA, and then I created a new certificate with the Server App (ID type "leaf", certificate type "SSL server". (see screenshots below), and I had it signed by my own CA. When I checked the certificate it said "valid".Next, I exported the certificate from the keychain (as .p12) and then I went to Server App's "Import a certificate identity" to drag and drop the certificate onto the window. So far so good.
When I opened the list of certificates (Server App -> Hardware -> SSL -> Edit ) the new certificate showed up once, and after the Server App had tried to install the certificate it simply did not show up any more. I have copied the important parts of the certificate below (private parts have been cropped).The common name and the DNS name are "myserver.domain.private", and yes, DNS is working fine.(I stopped started services and re-booted in between creating and importing the new certificate.)
Info:
Mac mini (Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 1, 2012
I don't understand how it happened, but a school I work with has had the SUS rip through 80Gig in a few days (Snow Leopard Server 10.6.8). Same as with my home server (Lion Server 10.7.3).
View 3 Replies
View Related
Apr 18, 2012
Since installing Filemaker Server 12 on our Lion Server 10.7.3, the Webmail is no longer working. I know with previous installations of Filemaker Server I have been asked whether I wanted to keep the system version of PHP or install PHP which comes with Filemaker Server, but I don't recall being prompted about it on this occasion. Previously I had always opted to retain the system PHP.
[code]...
And from the WAN I get just a screen saying webmail is turned off and that I can turn it on by using the Server app on the server (It is already checked in the server app).
Info:
Mac mini Server (Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
May 21, 2012
With any Unix machine, one can run at the command line:- apachectl -S This will show all virtual servers configured in Apache, and will break if there are any obvious problems in the httpd .conf files. It's very handy for testing a new configuration before restarting the server. With Mac OS X Server though, this doesn't work properly. Sure, I can run that command and see a virtual server or two, but with the introduction of the server Apache wrappers, the command line tools read a very different configuration than the `serveradmin` tool does.
e.g. Wrappers like:-<IfDefine MACOSXSERVER>
....
</IfDefine>
or <IfDefine WEBSERVICE_ON>
[code]....
ps. Running `sudo serveradmin stop web && sudo serveradmin start web` really compared to `apachectl graceful`; it's painfully slow and doesn't provide a way to test a custom configuration before attempting to restart.
Info:
Mac Pro mid-2010, Mac OS X (10.6.4)
View 2 Replies
View Related
May 23, 2012
not quite so dire if you clicked this wondering ??? And why is this bing posted on Server forum? Well it happens to be on a server and I am trying to iron out what happens when you completely trash the system and start over. This problem occured in a subdirectory on one folder. It (the triangles ->) are there for all the other folders. However, there is one folder I had on a backup (backup, meaning still being a previous version of Lion) that at one point that any group of folders I place into it. there is no browsing triangle that lets you go down furthur. Yes you can open the folder and go further in, so its not prefs that I am aware of.
At this level...Triangles Here Still? Triangles still here. (Must say in Cookie Monster voice if you've watched the "Cookies done yet" bit you might giggle or at least be mildly annoyed.)
If you browse from this part of the hierarchy you get the expected behavior...Triangles Here Still? Triangles still here. however if you open the folder here is what you get...Triangles Here Still? (uh oh).
[Code]...
Anyway, sorry for the "less professional" candor of this post, but I have kids and a wife, and they think I am boring at times, and I love them - and while I am struggling with this, I am thinking of them, and obviously not with them. Ok Universe, this is where I need you the most: I'm counting on you do to something or say something to make it all better. Ok...Go
Info:
Mac mini, Mac OS X (10.7.4), Lion Server
View 1 Replies
View Related
Jun 4, 2012
I know this issue is kind of old, but there are so many flavors of it, that it is hard to find exact match. I've been having problems with single account, and it happens that this account has admin rights. Emails get pulled/deleted from user's mailbox within 10 secs after arrival. There are no other devices that may be pulling those emails, however, I've noticed something strange in the logs:
Jun 4 13:47:43 osxserver dovecot[173]: imap-login: Login: user=<xxxx>, method=CRAM-MD5, rip=192.168.0.123, lip=192.168.0.123, mpid=406, secured
I don't know if this event is normal to run on server itself, but seems it runs only for this one account that I'm having problems with. There is no imap client setup on that server, and based on my time stamps observations I'm pretty much convinced that's what's deleting my emails.
View 1 Replies
View Related
