I have a Canon Z200 camcorder. This unit has DV out to firewire. My MacBook only has USB inputs. How can I use my Canon Z200 with my MacBook? iogear has a USB/firewire hub will this work? Would I be able to plug my camera into the firewire of the hub then usb of the hub to the usb on my MacBook? I'm just wondering why I can't get a DV out to USB cable?
View 4 RepliesI've bought a Canon camcorder a few months ago and last week I got a MacBook Pro 15" with Final Cut Pro7, now I can start editing my videos but I don't know which FireWire cable I need to buy and use. I've got a MacBook guide with the laptop and I know that my MacBook Pro has a FireWire 800 port but I don't know if FireWire 800 would fit my Canon VVixia HF S10 camcorder's port. I don't know what port does my camcorder even have so that I know which FireWire cable to buy. So can you help me with this? Would the FireWire 800 fit for the Canon Vixia HF S10 or what do I have to do? I know the camcorder came with a USB cable but I don't really want to use that one, since FireWire it's much easier to use with Final Cut Pro7 than USB cable with all the save in Document first then open in FCP7. With FireWire it's easier to log and capture the video.
View 1 Replies View RelatedHow to shoot picture from my canon eos 7d camera using hdmi cable direct to my MacBook Pro lions?
Info:
Mac OS X (10.7.2)
What firewire cable do I use from my new Macbook Pro to Canon Vixia Camcorder?
Info:
MacBook Pro
i would like to find a cable to go from my canon 60d camera to the firewire port. i have been to numerous places and they do not have it. i could not find it at canon as well.
Info:
imac, Mac OS X (10.5.8)
I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera or firewire cable. Trying to get footage into Final Cut Pro 10 off mini dv tape.
Info:
iMac, Mac OS X (10.7.3), Final Cut Pro 10
I was doing an upgrade of the hard drive in a MBP and unfortunately when I removed the keyboard the ribbon cable attaching it to the MBP's Logic Board came off and I can't figure out how to reattach it. I know it there has to be a way to reattach it but I don't want to attach it wrong and have something short out. How would I go about reattaching it?
View 2 Replies View Relateda Cable that DEF transfers audio over to the tv? Also here is my macbook pro model. Does it do Audio? Build 10FS69. Someone said there is a belkin one, is that right? Also, I just bought one from Monoprice and that f'in cable doesn't work
View 17 Replies View RelatedJust wondering if anyone knows is the original iBook G3 Clamshell A/V cable is interchangable with the iPod A/V cables?As in, can I use an iPod AV cable for my clamshell to output to my television?
View 5 Replies View RelatedLooking for best conversion cable to hook my Mac Book Pro up to our new HDTV - thought someone said I should get a converter that converts Mac 800 firewire output to an HDMI cable hookup.
View 6 Replies View RelatedI receive cable TV at home and I am told that instead of using a TV I can hook my MacBook via a HDMI cable and watch TV that way on my laptop screen. I'd like to do that. Is the information correct? How do I go about it? Can my MacBook do that?
View 1 Replies View RelatedI was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
View 1 Replies View RelatedI have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
View 2 Replies View RelatedI have a Mac Pro with an optical line in. I bought a cable and connected it to the Mac Pro, but the receiver(where I want to plug the line in) is old and only received optical. Is there some sort of adapter that would convert the connect that doesn't cost $200? I was able to connect an analog cable from the front of the mac pro's headphone jack into the back of the receiver, but the sound isn't really the greatest.
View 1 Replies View RelatedQuick question - I have a cable line running from my wall to my cable modem, which in turn connects via ethernet cable to an AEBS. The AEBS provides wireless connectivity to four Macs.
Can I split the cable line in my room so that I may watch TV, or would this cut my download/upload bandwidth in half?
I just brought a brand new IMac today but could not connect the internet with the cable though the cable does work with other computers. Do I have to change the settings or .....? Or its the problem of the jack?
Info:
iMac, Mac OS X (10.7.4)
i have just started my phd and am looking for a portable laptop. my requirements are pretty basic - lots of word processing, music, movies, and of course internet. maybe some photo editing. now first, i am a little mixed up if i should go for the macbook pro (basic 13 inch) or the newly launched macbook air (13 inch basic). pro is more powerful and cheaper than air. but then air is lighter and also has the faster flash memory! on the other hand, i am tempted to go for an SSD option with the pro. the price goes up of course by 315 $ or so. but in a way then the system could last me for a very long time given that the new polymer batteries last 3 times than normal ones. and its really the batteries/HDD that get worn out first.
on the other hand i am a little wary of SSD technology. it seems that the old HDD's are not that bad, and have some advantages over the SSD's. an internet search reveals that the 1st generation SSD's had a lot of problems. so does apple now use 1st generation ones or newer ones? moreover, is the SSD option more reliable or the flash drive one (with air)? basically am ready to invest a big amount provided i am assured that the system will last me for a long time to come.
Can I use my Canon BJC-85 with my MacBook Pro OS X 10.5.6
View 1 Replies View RelatedI am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP.
Info:
Canon LiDE 210, Mac OS X (10.7.4)
for all running out of space,I have replaced the Harddrive on my macbook air Prozessortyp:Intel Core 2 Du Prozessorgeschwindigkeit:1.8 GH Anzahl der Prozessoren:1Gesamtzahl der Kerne:2L2-Cache:4 MBSpeicher:2 GBBusgeschwindigkeit:800 MHzthe sparepart Hard Drive i used
View 1 Replies View RelatedI have a MacBook Pro that is approximately 2 years old. It has always worked fine without any issues at all. Tonight I was installing some scanner software for a Fujitsu S300M scanner. After installing the software it asked me to reboot so I had reboot. At that time I came back a minute later to see just a black screen. I then after a couple more minutes decided to hold down the power button and turn off the power since nothing was happening.
I then pressed the button again and I saw the light turn on on the button that opens the screen but that is all. There was no startup chime, nothing. All I could hear is at the same time the light came on the optical drive makes it's noise that it makes at bootup. I have tried repeatly to start the computer. I have pulled both the AC Power and Battery for several minutes with still no luck. As I said just the light comes on and the optical drive makes noise and that's it, no startup chime, nothing. I don't think this should be related to scanner software and I'm assuming it was a coincidence that it happened then but any idea what could be causing this and can I fix it without a trip to the genius bar?
I have an aging mac. (macbook pro 15.4" core duo (2006)) I would like ot breath life into the machine by upgrading the ram. I am thinking of upgrading to 2 gigs from 1. What kind of a performance upgrade am I going to see?
View 3 Replies View RelatedI have so far had a few instances of this phenomenon w/ my 15 mo. old Mac. First, when charging my Mac at night in off-mode, it will occasionally turn itself on at some point evidenced by the power-on when it's opened. Then,I have had one instance of a shut-down by itself during use. It restarted w/ no problem. Next, the computer turned itself on with the cover closed and the computer had been off all night. I heard it start up, so I am sure. I do have AppleCare if I need to take it in.
View 3 Replies View RelatedI've got several Apple computers in a network. I'm using a Canon multifunctional PM600R for printing. It's connected on a iMac DV with a USB-cable. I'm using a Vigor wireless router. It was alle working perfectly. With my Powerbook I could use the printer wireless. Recently I bought a MacBook with Leopard. Up until today I can't print wireless. When I connect the Canon printer directly (USB), it will print. But that's it. I've downloaded the most recent software from the Canon website. Unfortunately, it won't work. In printer configuration I just can't select the printer because it doesn't show up in the window of the Canon IJ network tool.
View 3 Replies View RelatedI recently bought a Canon Power Shot. I have used it and transferred photos to my Mac and didnt have any problems. Now all of a sudden, I turned it on, to import the pictures to the computer, and the camera just turns itself off and the Mac says no camera detected ! I dont know if this is a problem with the camera or the Mac. The camera works fine when actually taking pictures.
Info:
MacBook Pro
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640hthe
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page.
Info:
MacBook, Mac OS X (10.6.8)
i could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5. how could i connect wireless?
View 1 Replies View RelatedI have a macbook that was given the ol beer in the keyboard treatment and went dark with a ghost image, before I bought it, leading me to believe that it was the inverter board had blown, I bought one online and replaced it but to no avail. The previous owner obviously had very little knowledge as they left a few screws out on reassembly but I don't think they should matter a lot. I could of course use it with an external monitor but kind of defeats the purpose of a laptop. So would like to get the display working without having to buy a new display. I cannot seem to find out if it is possible to replace the backlight, if this is the problem, or to find one for sale online, even on the excellent ifixit site. It is a 2Ghz intel core 2 duo.
View 5 Replies View RelatedI have an Intel based Macbook pro. I have an old Thinkpad T20 with XP Pro acting as a print server. My printer is an HP PSC 1350. I also have another laptop with XP on it. My wife uses her PC laptop and I'm using the Mac. She can print wirelessly to the PSC1350 no problem. I have downloaded and installed the hpjis, Foomatic-RIP, and Ghostscript in order to get the driver for the HP printer. The 1350 isn't on the list, but the 1300 and the 1400 is so probably close enough. I can see my printer on the network from the MacBook and I load it, etc...
When I go to print, the file goes into the queue, the printer fires up, prepares to take the paper, and then stops. Going to the XP laptop acting as the server - the file is shown in the queue and says Printing, but it's stopped. I have to manually remove the file from the queue from the spool directory to clear it. Has anyone ever been able to get the HP PSC 1350 to print from a MacBook through an XP server?
One that no one would be able to get in at all? I've read where someone could use the install disc and set a new password. There's no way at all to make my computer totally safe from someone getting into it?
View 5 Replies View Related