Recently, despite careful file management my internal hard drive has reached its capacity so I purchased a 2TB WD My Book to move many of my files to to make room. After reformatting it (Mac OS Extended Journaling) starting copying stuff over but I struck a problem when I tried copying my iphoto library file over. Its about 47gig and every time i try it begins to copy but then it suddenly stops around 600mb saying it cant read or write something in the file.†Is the file too big? Do I need to format the drive it differently? Hopefully not as I've already moved a heap of files over.
I am transferring my iPhoto library to an external hard drive and it is agonizingly slow.¬† ¬†
I am attempting to make room on our iMac so am moving our 193 GB iPhoto library to our Seagate 2TB external hard drive.¬† The drive is brand new AND is formated properly as Mac OS Extended (Journaled) but the current copy estimate is for it be completed in over 80 hours.¬† I dont beleive the drive is broken as data is continuing to be transferred and not completely hung up.¬† ¬†
When I transfer other folders/files the process is much much faster.¬† Problem only seems to be with iPhoto library that I have found.¬†¬†
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
Probably a stupid question but I can't figure this out as it is not covered in the User's Guide or in the FAQs on the Fantom website. I have an PowerMac G4 with an old Fantom 120GB external drive which is nearly full. I have purchased a Fantom Drive High Speed USB 2.0 (750GB.) How do I transfer data from my old Fantom to the new one?
Macbook pro 13' running 10.5.8 has intermittent issues with usb 2.0 mass storage drives but not jump drives. Here is the issue, my gf just got a brand new mac book pro 13'. This is great for her no more asking to use my unibody macbook. She plugs in the drive I have used for a very long time with my mac my pac etc. with not a hint of issue. The drive shows up copy's stuff off ok. However when it came time to return the data back to the drive it gets about 10% through and just hangs. Here is what I have done. I first thought ok might need a reboot. Then I went with the ok I will check her disk for issues. This is a 3 day old mac book by the way. I found random permissions errors with quick time which has never been run. After the fix the issue goes away for that boot.
The issues seems to come back after a re-boot or so. I go ok enough of this I format the mac with the system disk, then I update to the latest updates from apple. Plug in the drive and still having issues. Run the permissions repair same issues exactly format to format. I have also run the deep test off the system disk the machine checks out through that so I have ruled out ram on her system as a possible culprit. I am at a loss on this machine. I have gone so far as to format the external drive replace the data from my network server and try that. Still no luck. On my box there is no issue it time machines great it copy's data like a usb 2.0 drive should.
Alright, so My ipod is formatted for windows when formatted in this you can only copy chunks of 4 gig things using it as an external. but if you change the formatt of it to take all sizes, then it's not compatible with mac and pc. =/ i had it originally formatted for pc because i just recently got a mac book pro and it's my primary computer. well on to the hard drive trouble that is related i'm borrowing my friends external to get a 8 gig file from my pc to my mac. it's formatted in fat32(windows and mac read) but that format only allows for a 4 gig max to be put on it at one time. so i guess i'm outta luck there, i've looked at JR split but who knows it that will work. My main q is, i'm going to be getting my own personal external soon and i want to know whats the best way to format it that it will mount on my pc and my mac and allow me to copy more that 4 gigs of stuff on it at a time.
I have OSX leopard as a disc image on my desktop. When I try to copy the .dmg file over to my external hard drive it copies for a while, then an error message says it can't copy it over and stops. I'm really confused as this sort of problem doesn't usually happen.
I'm running Tiger 10.4.11 and I want to install Leopard. The Leopard disc image is 6.66GB.
I can't burn it to a DVD either because the discs I have are 4.7GB & the .dmg is 6.66GB. Do I need to buy a bigger DVD blank disc?
Another question is how I should burn the disc. Should I simply burn the .dmg file straight onto a DVD (if I can get one that is big enough!) using Disc Utility?
ive had an imac g4 for 4 years and the other week the logic board gave up, i took it to a mac repair shop who advised me the repair would cost 600 pounds!! i decided its best to invest in a new imac (running snow leopard if that makes a difference) which im going to buy over the holidays.
the old hard drive has been removed,cased and ready to go. i plugged it into my girlfriends macbook which read it as an external drive... great so far
here comes the question. the drive has all my apps and personal bits which i dont want to loose or reinstall. do i simply drag the applications across on to my new machine? primally interested in iphoto and itunes. will i loose these music files and 4 years of photos?, or can i navigate into the app on the hard drive and drag the files into the new itunes/iphotos on the new machine?
I have had both my MacBook and external hard drive for over three years now, and have never had a problem. In the last week, my external hard drive stopped letting me copy files onto it. When you try to drag and drop it just comes up with the blocked symbol. I have tested this with other hard drives as well and keep getting the same error. I've read other forums where it seems the answer is just to reformat the hard drive to the correct format, but I've never had a problem before so it seems strange that the format would just suddenly change.¬†
I have an external 2TB Western Digital Caviar drive hooked up to my 2006 iMac through a docking bay and USB 2.0. I'm running 10.6.6 and the drive is formatted as Mac OS Extended. It's my media and backup drive and I'm always copying stuff to and from it. All was well and good with the setup and I had no problems for probably 5 or 6 months. Just around Christmas, though, I started getting alerts when trying to copy files over to the drive. Error Code: -50.
Basically, I can still view/read files on the drive and play songs in iTunes, but if I try to rip a CD, iTunes hangs and dies. If I try to copy any file over using the Finder or empty the trash with files from that drive, I get the -50 code and alert. A restart will fix the problem for a little while but then it's back after maybe 30 minutes or so that's obviously not a good long-term solution. This page claims it is an "Error in user parameter list" but I have no idea what that means. I've done a bunch of Googling, but people are saying it's anything from problems with networked NTFS drives (which it's not for me) or that it's a disk permissions issue (no bootable system on the drive).
I have a 38gb iMovie file on my MacBook. I also have a 160gb external HDD. I want to copy the file across, sounds simple right? It will start copying happily but when it gets to about 8-10gb I get this error message (EVERY TIME!): Sorry, the operation could not be completed because an unexpected error has occurred (Error code -1309). I really do not want to delete this file as it is a wedding video I did for a friend only a few months ago. I am trying to copy across to a Freecom II drive using USB.
i have been trying to copy files on macbook air to my external hard disk which i used for my windows pc, n=but im unable to do so. and i even cannot delete the files on the hard disk. but i can copy the files on hard disk to my air.
I have a MacBook from Christmas 2009. I'm very happy with it. I am using an external HD, a Western Digital Passport with 500 GB for my Time Machine backups. The MacBook seems to have a 250GB hard drive, but no firewire connection. So far I have used up about half of my WD Passport external with Time Machine backups. I have about 6500 photos and almost 12GB of iTunes music, and I don't want a catastrophic failure to cause me to lose it all. In addition to the Time Machine backup, I'm considering using Carbon Copy Clone with an additional external hard drive for a complete backup. I'm not very Mac or programming savvy, so I'm looking for an idiot proof method. What do you guys think of CCC, and what size/brand external HD do you recommend? I think CCC has to have an HFS+ formatted drive. I don't want to keep it connected all the time, but I would like to occasionally clone the MacBook harddrive so I always have a fairly current bootable backup.
How to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk.
Info: MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.1)
I have an imac, I moved my iphoto library on to an external hard drive (lacie usb 2.0). I moved my iphoto library that was on the internal drive to my trash folder. (Dont want to delete until I know everything works properly).When I'm using iphoto I keep getting this message "Please make sure the disk containing your photo library is mounted and restart iPhoto".
I want to partition my external hard drive for my g4 power based mac running Leopard.I will have one partition for Time Machine and the other for Carbon Copy Cloner.Here are my questions:1. Which partition scheme should I choose for Time machine?2. Does Carbon Copy Cloner work the same way for non-intel macs as it does for intel? Do I need to click on the OS 9 check box to make my version of CCC bootable (I want a bootable clone)? Which partition scheme should I choose for Time machine?