Intel Mac :: Backup Shared Drive With Timemachine?
Mar 5, 2012
I have an imac with two time capsules (1TB and 3TB). I am using the 1TB as a shared drive on the network (mac + pc's), and the second one (3TB) as the time machine backup drive. I have not been able to include the shared drive (1TB) in the time machine backup, it only included the imac hard drive. When I purchased the seconf time capsule, I was told this is possible. Can you help with any configuration recomendations to make this work?
My internal 1TB hard drive on my iMac is dead and I don't have the money to replace it at the moment. I have everything backed up on an external 1TB drive using Time Machine. As a workaround for the time being,Is there any way I can install the system on the external drive and use that as the boot drive without erasing the Time Machine Backups? It seems to me I would have to have two partitions for the external drive, one for the system, and one for Time Machine. But is there any way to add a partition without erasing the existing one with Time Machine only on it?
I just bought a MacBook Pro 2009 model and would like to have a dedicated external hard drive for performing TimeMachine backups. I know there are probably great options out there for me to purchase, but I'd like to take one of the two that I currently have, format it to GUID and for Mac via disk utilities, and then use it for TM.
The two external drives drives I have are:
1.) WD5000AAV 500gb (about 2 years old, requires AC outlet) 2.) Toshiba Canvio 640gb (about 3 months old, no AC outlet required).
I just can't find specs for the actual drives inside of these external drives (drive speed, cache, etc.). Maybe it doesn't matter which? I just want whichever is fastest and most reliable.
I want to verify if Migration Assistant will restore a backup from NAS drive to a new computer. I just got a WD My Book Live Duo NAS drive which supports Time Machine backups for Lion (and Snow Leopard). Unlike backups in Snow Leopard and the WD My Book World Edition (white light), the new NAS drive creates a sparsebundle the first time a backup is initiated. When I open Time Machine, a single volume for my backup appears. I have 3 Macbooks backing up to this drive but when I open Time Machine on any computer, only the backup created for that computer is shown. This raised a question for me that if my computer dies, how do I restore the backup from the NAS drive to the new computer? Is this what Migration Assistant will do? What are the limitations? Does the new computer have to have the same IP address as the old computer? Can I select what gets restored?
I am currently pondering how to make a backup of my Imac. On the old threads I skimmed through I could not find the right answers - so I made one of my own In my imac I have a 500 GB hard drive (~300GB in use). I also have a 1.5 TB external hard drive which will be my backup drive. I am planning to combine CarbonCopyCleaner (or SuperDuper Im not 100% sure yet - any suggestions?) with Time machine to get.
a) a bootable copy of my system b) regular backups with time machine.
On top of this I want to move certain things (like movies and stuff I dont really need to back up) on the external hard drive. Now I am wondering two things however: Can I achieve CCC, Time machine backups AND seperate data on one partition? I guess not because then it would not be bootable? If I use 2 seperate partitions (one for CCC and one for Time Machine and the data/movies etc) - can they be resized WHILE data is on them? I am asking this because I am using my mac to produce music and the data keeps growing. I would love to avoid fixed-size-partitions if possible.
I have just noticed that Time Machine does not seem to want to backup certain big files I have (such as VMware virtual machines 5gb files). I have checked the options setup in TimeMachine and there is no setting here that could imply that these files would not be backed-up. I have made a test and noticed that TimeMachine will not backup the stated files. Does anyone know what could cause this?
- Is there any way to include a description to a Timemachine backup? It would be helpful to include information such as "backup before installing a specific program or system update".
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
I was wondering if anyone knows a way to automatically sync certain folders from a Windows BootCamp partition to the Mac.
Basically what I'm trying to do is automate a way to backup my Mac with Time Machine but also keep important files that I use on the Windows partition backed up at the same time.
I have an brand new HD that I want to restore from TimeMachine. Erased and partitioned this brand new drive. Created 2 partitions and formatted as “OS Extended Journaled/ GUID.”
Did a “Command R recovery boot” and went through the steps to backup from TM to my new HD. 15 seconds into the restoration process Msg. reads: “Error occurred while restoring from the backup.Restart your computer and then try restoring again.”
Trouble shooting:
Luckily my original files and initial boot drive that TM was backing up from remains fine and I performed some more TM back ups as well as a TM backup onto another drive as well.
I even tried restoring to another empty drive with older backups and backups off of another HD and got the same error message. All my BU’s and BU attempts have been within 10.7.3 on the same MP.
Info: Mac Pro 2X3 Ghz duel core intel xeon, Mac OS X (10.6.7), 16 GB Mem
My finder/computer crashes at least once or twice a day when the Time Machine backups start (there are other times where the backup will go fine). I am using a MacBook Pro, 2011 2.2 GHz i7 with 8GB of Ram. I have a 64 GB Samsung SSD drive I use for startup and applications, and a 700 GB SSD/7500 hybrid drive mounted in the Superdrive bay for docs/music/etc.
I have a 1TB WD HDD connected via USB I use for Time Machine. Looks like there might be something amis when I am using Chrome and Time Machine in the superdrive bay SSD/HDD setup? Also some software update errors were being thrown just before the crash too.
Here is the console Log just before the crash through the reboot:
5/27/12 12:45:10.207 PM com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [8335] for authorization created by '/usr/sbin/softwareupdate' [8334]
[code]....
Info: macbook, powerbook G4, G5 Xserve, Mac OS X (10.4.10)
I have been trying to move my old TimeMachine data to a new, larger hard drive. A very helpful member of another forum suggested I use the Disk Utility "Restore" utility, restoring my TimeMachine data from the old disk to a new disk. For some reason this will not work for me.
With TimeMachine, I backup two external drives (let's call them drive A and B). Recently, drive B broke and I restored the data on a replacement drive and gave the volume the same name as the broken one had. I made TimeMachine aware of the fact that this new drive corresponds to the old one by using the "tmutil -a associatedisk" command as described here: [URL]When TimeMachine started the next backup, it did not perform all full backup of the new drive, though still way more than it should. So far so god.
The problem is: if TimeMachine performs a backup while the new drive (the replacement of drive B) is not connected, it does not create the hard links for it. Drive A is not connected either, though hard links for it show up in the Backups.backupdb folder for this backup. If the replacement drive is connected the next time, TimeMachine will perform a full backup of it ... most likely because the previous backup does not contain any hard links.
I have an iMac that is now close to two years that I have been a little unlucky with. Two times the harddrive has crashed and had to be replaced. Last time I managed (learned from experience) to make a TimeMachine back-up. I can see on the external drive that 160gb are in use but I am unable to gain access to the files. The main thing is a lot of pictures that i would really like to recover. It is now about 4 months ago this happened so new pictures have been uploaded in the meantime.
First, the drive kept triggering a "your external device may have been disconnected improperly" message. That despite repeated erasing of the disc and restarting of the set up a Time Machine backup usinig this 500GB USB2 drive with its own power supply. Finally, I placed the drive on its fronot panel and it stopped disconnecting. Then, it started the backup. It is now 9:30 in the morning. I started this backup at 9:30 last night. so far it has managed to accomplish 23.79 GB of a 64.45 GB back up.
Info: iMac (20-inch Early 2006), Mac OS X (10.5.8), Using a LaCie 500GB external Drive
I noticed that TIme Machine had stopped backing up, so I looked to see what was happening and I was getting an error saying that the external hard drive I am using for my back up was having problems (sorry I can't remember the specifics right now) and that I needed to fix the drive or possibly erase and reformat the drive. So I reformatted the drive and started a new backup onto the drive. I'm not sure if that backup completed and now I don't see the external hard drive on my desktop. I've made sure all cables are attached and have unplugged and replugged them in but I still don't see the drive.
My computer crashed when I was playing a DVD. It is a 500g hard drive and is 250G full, mostly music, some movies, and photos. I have lots of email as well. I have an old time machine backup but there were 3 months of unsaved data such as new movie downloads, ipad sync'ing, photos, and music I need to retrieve. I stopped running time machine because the external drive filled up and I was going to buy a new one.
I was able to reinstall the OS again over the old one and login however the old login was saved as a backup and a new user name was created. The permissions were all messed up and I could not reassign the old user name with the old programs and settings. The computer then crashed again before I could back anything up. Now if you try to reinstall the OS again the CD's crash and it wont finish. If you try to boot with the CD you can go to the Utility section and see that the drive says it's failing. I'm not sure how to back all the files.
Is there a way to remove the corrupt drive and later mount it as an external drive to the new one? I'm worried that I won't be able to back the files up if I connect a new external drive.
Info: iMac 3.06 Ghz Intel Duo - 24" - 2G RAM, Mac OS X (10.5.4)
My external USB backup drive is not large enough. I purchased a Western Digital My Book USB 3 Tb drive and need to transfer all the data from my old drive to the new one.
My iMac wouldn't boot. All it would do is come up to a utility screen.So, I opted to restore from a backup (I use Time Machine that does backups to an external drive connected to the fire-wire port). I select the date of the backup that I wanted to restore and went to the next screen. When it got to the next screen where you needed to select a destination drive... it didn't find any in the system (there was no drive to select).
I assumed the hard drive died so I bought a new one. I put that in this evening and when I tried to boot the machine and restore from a backup to the new internal drive... the same thing happened. It did not recognize the new hard drive I just installed.I replaced a 500 GB Western Digital hard drive with a 1 TB Western Digital hard drive.Now I'm thinking the original hard drive is still good.
I am unable to move files from a 250 GB backup hard drive to a 1.0 TB b/c I keep getting the warning that isn’t enough space. Get Info says that 999.72 GB on it are in use. But the 1.0 TB was almost empty. If I add up the space of each of the 3 or 4 items on it, I get less than 20GB. What’s taking up the other 979 GB?For background, I now have iMac backed up with LaCie 2Big NAS system. The 250 GB is primarily to hold iPhoto Library and backup copies of original photos. the 250 GB is full. So I am trying to switch over from 250 to the 1.0 TB for photos. Moved a few smaller files over, but then could move no more. Thought of running disk utility to erase the 1.0 TB, but now I can’t move the few files on it back to 250 GB, but of error message that it too is full.I did run Repair Disk on 1.0TB before started trying to move files.
Info: iMac (20-inch Early 2008), OS X Mavericks (10.9.5), MBA (10.9.5) iPhone 4S, iOS 7.1.2
I have to send my iMac 27 back to apple for replacement (flickering screen issue) and I would like to erase my personal information. How do I do that on a Mac? I have a Lacie Drive connected via Firewire 800 and have been using Time Machine for backups. I also want to make sure that I have a complete backup as well. I am new to Mac OS X
Information: iMac 27 & MacBook Pro Mac OS X (10.6.2)
I've had an external 1.5TB MyBook for around five years now and recently decided to backup/replace it with a 2.0TB MyBook. However I'm having a lot of trouble finding a simple, painless way to copy all my files from one to the other. The hard drive is simply an external host for my iTunes library, which contains nearly 140,000 files. Initially I tried copying the entirety of my Music folder over, but for some reason it hit a hang at 96.58GB/947.06GB and has never progressed. I then attempted to do smaller transfers and got about 1/4 of the way through my library doing so, but I've experienced more hangs along the way.
Can't cancel the copy operation once they occur, so they just sit there on my screen. I attempted to restart my computer but Finder won't allow me to shut down without first canceling the copy processes.All of the guides I have found on the internet, including the Apple website, seem to indicate that this is the only way to do things, which is beginning to really frustrate me since it also seems to be a method that doesn't work very well; in fact, it seems to succeed mostly by random chance. Is there something I could do to ensure this doesn't keep happening, preferably so that I could go back to my original idea of copying the entire folder over at once?
Info: iMac G5, Mac OS X (10.5.8), 2.4 GHz Intel Core 2 Duo 1 GB 800 MHz DDR2 SDRAM
I have an iMac desktop with OS X version 10.9.4 Mavericks operating system. Processor 2.06 core 2 duo Memory 4GB 1067 MHx startup disk hard drive.
Problem is I deleted some photos from my hard drive to free up space, thinking I could access them from my backup drive if I needed to. However, when I try to get the photos through my TimeMchine backup drive, it won't let me, saying it's not the original library. How do I access my old backed up photos?
We are trying to connect to the hard drive on another mac in our office. We go to Network > My Network > and we can see the hard drive listed there for the one we want to connect to. It tries to connect w/ msg AFP Connection Status Looking up "machine name" and it never connects. Personal file sharing is on for the machine. Any ideas of what we can try to connect? Out of the 4 MACs here - we just cannot connect to this one.
