Intel Mac :: Won't Read / Mount DVD-R Download Disk
Mar 30, 2012Disk Utility is saying "Invalid Number of Allocation Blocks."
Info:
iMac 2.4 GHz, 3 Gigs, Mac OS X (10.5.2)
ADVERTISEMENT
Intel Mac :: SuperDrive Does Not Read Disk And Eject CD - DVD Fine
Mar 22, 2012I have a problem on my IMac 27" (early 2010) when I want so listen to some CD. The Superdive doesn't read the disc (is clean of course) and it ejects after a few tried. On the other hand, no problems with DVD. So I don't know if is a software problem.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.3)
OS X :: Cannot Read Or Mount Network NTFS Drives
Nov 8, 2010I am running Snow Leopard. I have a few drives on my PC that I have shared, three are NTFS and one is FAT32. I can read and write to the FAT32 on just fine, everything works as it should with it. I can view the NTFS shared drives, though when I try to access them I get this error. The operation can't be completed because the original item for "Drive Name" can't be found. I can read NTFS USB drives fine, and with NTFS Mounter running I can write to them all the same. However this is not the case whatsoever with networked NTFS drives. I am sharing them from a Windows 7 x64 PC, my Mac is a 1st gen Intel Core Duo 1.66.
View 5 Replies View RelatedIntel Mac :: Change File/folder Permissions From Read Only To Read/write?
May 5, 2012How do I change a file or folder permissions from 'read only' to read/write.
I want to edit some music track information in iTunes, but my iTunes music folder is 'read only'
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
Software :: Cannot Download - Unable To Mount Due To Error 95
Sep 27, 2008I cannot download anything off the internet says unable to mount due to error 95 (no mountable system). I dont know what that means. Been trying to download anything from onlinepoker to limewire and bit torrents, with no luck
View 2 Replies View RelatedOS X :: Usb Flash Disk Cannot Mount?
Jul 16, 2009my usb 2.0 removable flash disk had a problem. i reformatted it and while in the process it failed. then after that my usb can't be detected by mac but i can see it in disk utility. i tried everything in disk utility. [URL] that disk2s1 when i try to verify, or even repair it something will say that ** /dev/disk2s1 could not read boot block (Permission denied) Filesystem error: verify or repair failed
i can't mount it too..when i hit the mount icon it would say try first aid on it first or verify or repair and try again. i've searched everything in the net but i can't find something.
ah..and when i insert my usb in windows (desktop) the usb will be detected but i cannot open it.. the pc will hang and i can't even get to see its properties in windows.
OS X :: Mount HD Without Using Disk Utility?
Jul 13, 2010Is it possible to mount a hard drive without having to open up Disk Utility?I often unmount my different Hard Drives then remount them later on and I'm getting sick of having to always open Disk Utility.
Is it possible, though another program/utility or in Mac OS X to mount a drive within Finder (or maybe the taskbar?)
Mac Pro :: SuperDrive Will Not Mount Any Disk
Apr 12, 2012I have a mac pro 2.8 Ghz Quad-Core Intel Xeon box. Tonight I replace my 8 g memory sticks with 16g memory sticks. After rebooting my super drive will no longer mount any disk that is put in the tray. I close the tray then after several seconds the try pops back open. I have tried cleaning the drive with a cleaning disk, it does not work. No sound comes from the drive, in other words I don't hear it attempt to spin up. The super drive shows up in disk utility and under Disc Burning in system information.
View 3 Replies View RelatedOS X Mavericks :: New 4TB Disk Won't Mount
Sep 5, 2014Bought a new 4TB external hard drive (USB 3.0). I need to use it with Time Machine. The instructions on Apple said to format as GUID. When I opened up Disk Utility to do this it started to format the drive as it normally would, and then out of no where it stopped and unmounted the drive. Now no matter what I try to do I can't mount it (even in windows).
If I unplug the drive and then plug it back in the "initialize" pop-up comes on screen, but even when I click Initialize it does nothing.
How do I get around this and format the drive?
Info:
Mac Pro, OS X Mavericks (10.9.4)
MacBook :: Startup Disk Cannot Mount?
Sep 19, 2010I was surfing this site a couple of days ago when my MacBook suddenly froze up. I couldn't Force-Quit anything or do a soft restart, so I decided to just power-cycle restart (pressing the power button until it shut down, then pressing it again to start up). When I did so, my startup disk wouldn't mount.
I should give you a little background: Mine is a MacBook White early 2009, with upgraded 4GB RAM & 500GB 5400rpm Fujitsu HDD. I took the HDD from an off-the-shelf 2.5" external HDD. It has served me well for slightly over a year, and is only now giving me this problem.
I have since replaced the original HDD (which I was keeping as a emergency backup, phew) and put the problem HDD in an external FW enclosure.
I have run Disk Utility on it to try & rectify the problem. Disk First Aid says the disk is fine, but I just couldn't get it to mount. I thought I'd try to erase it and restore from my TM backup, but after I erased the disk, it still couldn't mount. What's worse, now the disk is apparently not writeable, and I can't even erase it. Disk First Aid is still telling me the disk is fine.
I've also tried booting from my SL install disk, but it won't mount the disk to install SL. It is still visible in Disk Utility, but greyed out.
Can anyone advise what I can do to recover the disk?
I can't really bring it in for a warranty exchange, cos I ripped this disk out of the original enclosure, so the enclosure is now completely busted, and obviously the warranty won't be honored. (Buying the external was cheaper than buying just the internal, and Fujitsu had a pretty OK reputation for their harddisks at that point. Could you blame me?)
So any software or hardware (or combination) solution would be great. Worst case scenario is to get a new HDD, but I'd still like to recover the use of this disk somehow.
OS X :: Hot To Mount Disk Using Volume UUID?
Nov 17, 2010How can OS X mount and unmount a harddrive by its UUID (as displayed in disk utility)?
I know how to mount a volume by its disk identifier (e.g. disk0s3), but it may change after a reboot. Thus a wrong volume may be ejected.
I need a reliable method to mount/unmount a specific hard drive connected via USB.
Mac Pro :: Target Disk Mode Will Not Mount?
Apr 27, 2008I need some pictures from my g4 digital audio onto my macbook, so I started the power mac up in target disk mode with the firewire cable attached, and it didn't mount. I have restarted both computers, and still the disks don't show up in disk utility. Could I have a bad cable, or is something else the problem?
View 1 Replies View RelatedHardware :: Ext. HD Seen In Disk Utility, But, Won't Mount?
Feb 10, 2009I have a 500GB Seagate USB HD that is about a year old. it is connected to a 2006 Macbook with a 80 GB HD. I plugged the Ext. HD into the computer and the Ext. HD started and spun and the light went on, but won't show up on the desktop where it normally shows up. When I open Disk Utility The External Hard Drive shows up and I say Verify disk and it says it is OK, I say repair disk and it says OK. I then try to mount it and it says: The Disk "Free Agent Drive" cannot be mounted.
OS X :: How To Permanently Mount A Disk Image
May 26, 2009I have all my OS X applications that come with your mac on a seperate .dmg file, that's just how it happened. I'm not sure how it happened, but when I took my computer home, it just installed like that. I bought the iMac ex-display from PC World last august and it didn't come with any documentation, reboot disks or an apple remote. They say they don't have them with them, but they obviously do.
I keep forgetting to mount the .dmg every time I reboot, because I'm a klutz and becoming old at a young age. I was wondering if there's any way to automatically have the mac mount the disk image?
OS X :: How To Mount Disk Using Express Card
Jul 26, 2009I bought an Express card from here: [URL] I connected an eSATA drive to it. I don't see the drive in Finder and I suspect I need to format it first. But I don't see an equivalent to the Windows Disk Manager. How do I format the new external drive?
View 4 Replies View RelatedOS X :: Disk Images Mount But Will Not Open
Apr 1, 2010Well, after using Monolingual on my iBook G4 late '04 1.2GHZ running Tiger 10.4.11 I tried to install an app from a dmg file and the image mounts but when clicked Finder relaunches (or at least seems to because it blinks off then back on as when relaunching) and the image does not open. Did I mess up the architectures? I left the architectures as marked by Monolingual and proceeded with the deletion.
View 1 Replies View RelatedOS X :: 10.4 Install Disk Will Not Mount Or Boot
Jun 10, 2010I am unable to get my OS 10.4 Installer DVD to mount or boot my G4, currently running OS 10.4.11, though it mounts and boots other of my Macs and I am able to boot and mount a 10.1 DVD with my current Pioneer DVR-1060 drive. I would like to run a hardware test on my mac as I recently had one of my hard drives die and just want to check everything. So does not seem to be the drive and does not seem to be the DVDs. I zapped the pram, reset the open firmware and ran diagnostics using Applejack and everything checked out okay with my current internal drive.
View 5 Replies View RelatedMacBook Pro :: It Won't Mount External Disk
Jun 20, 2012I have a new Macbook Pro with a retina display that won't mount a Toshiba Canvio 3.0 Plus external 1TB drive. The drive shows up in the System Report under the USB tag. However Disk Utility does not see it. The drive shows up and is able to be erased and partitioned and mounted with another Macbook Pro running 10.6.8. So, the drive itself is good. how to get the drive to mount on the new Macbook Pro?
Info:
MacBook Pro (Retina, Mid 2012), Mac OS X (10.7.4)
OS X :: Target Disk Mode Not Mount Any Drives
May 12, 2007I thought having a Macbook and a PC and keeping data sync'd between the two would be easy, or so Apple et al would have me believe. So far I've not only found out that their IP over FireWire, the only feasible way to transfer the large amounts of data I have, is seriously lacking (i.e. I haven't been able to get it to work!) but also that when I try to ease my woes by connecting the Macbook as a FireWire drive in Target Disk Mode, it fails to deliver again. The first time I connected my Macbook to my PC over FireWire in Target Disk Mode, it popped up in My Computer no bother. Alright, so the only partition I could access was my XP partition on the Macbook (thank goodness I have that or I'd be right up the creek!), but I suppose it's to be expected, what with OS X and Windows having different file systems ETCETERAH.
So I'll copy all my media files to the XP partition and then copy them to my XP PC from there, I thought. Every following time I've connected in Target Disk Mode, I've received nothing but a 'removable disk' icon in My Computer which, when clicked, asks me to 'insert media'. WTF, Apple?! So not only can I not have my OS X drive show up in Windows on my PC, but now I can't even have the XP drive show up?! I didn't change anything, I didn't do anything differently, I literally just rebooted OS X to copy the files I wanted from the Apple partition to the XP one. Sorry to come across all 'angry like', it's just not the first, second, or third problem I've encountered since 'switching'. For a company who prides itself on how its products 'just work', it's becoming an eye-opening experience. However, I understand it's probably something I've done incorrectly, rather than the fault of Apple or Microsoft. So I ask you, what am I doing wrong?
MAC :: Can't Mount Volume (FAT32) In OS 10.2.6, Despite Seeing It In Disk Utility?
Sep 16, 2008I have to do a back up (I'm cutting in Avid) on this FAT32 volume (for interoperability it is formatted this way), but I can't mount it via the Disk Utility or the 'mount' command in Terminal (it doesn't list the device, despite seeing it in Disk Utility - the volume is greyed out).The drive is connected via Firewire 400 and 800, USB is not available (to few slots).
View 3 Replies View RelatedOS X :: Unable To Mount Backup Disk Image?
Jan 6, 2009for the past month or so my automated backups with time machine/time capsule have not been working. Every so often the following error message pops up:
"the backup disk image could not be mounted"
in troubleshooting, i have tried to mount the sparsebundle image directly but without success. from reading around a bit i can see that others have had this problem, and that one solution is to delete the sparsebundles and start again.
but that of course means losing all my archived backups, which i would rather avoid.
OS X :: Mount Network Disk On Desktop In Leopard
May 5, 2009I am using a 2x2.8 GHz Quad-Core Intel Xeon MAC running Leopard OS (10.5.6). We are 3 designers using 1 network drive (Lacie Ethernet 1TB) to store our projects. I used to be able to backup this network drive using duplicate option of Retrospect Express to another Lacie that was attached to the USB port on my MAC. Since we upgraded to Leopard I have not been able to do this. I think this is because the network drive no longer mounts on my desktop. I think it used to think the network drive was on my computer because it was on my desktop, but it no longer does. Anyway, I need to back this drive up on a regular basis. (I am currently drag/copying it, did I say 1TB) Is there any way that I can get this drive to mount so that it is on my desktop? Does anyone know of any programs that might duplicate this NAS for me over the network to the one on my MAC or I could add another Lacie to the network. All of the software I have found is just to backup a MAC computer not a drive. If I can drag and drop it, it seems like this should be easy, but when I tried a command line copy it didn't work (I think because we named it "mac lacie disk" with spaces between the words and it stops at "mac" and can't find the rest.
View 2 Replies View RelatedHardware :: Computers Able To Mount Airport Disk?
Aug 4, 2009After a quick search I realized that there may be people who do not know how to do this or haven't thought about doing this. I am about to purchase a new UB MBP and I would like to enable my existing Airport Extreme that is the first release (this means no dual band) to allow only N connections. I would like to supplement this by adding another wireless router I have laying around that is only B/G. To do this, should I just plug the B/G only router into a LAN port on my Airport Extreme and set up a new wireless network with another name such as "PhillStew N" for the Airport Extreme and "PhillStew B/G" for the other wireless router? Even more so, will nodes on my network that are plugged into the LAN ports on my B/G router be able to "see" nodes plugged into or wirelessly connected to the LAN ports/N connection on my Airport Extreme? Will computers connected to the B/G router be able to mount an Airport Disk that is attached to the Airport Extreme? For clarity, I have created a representation diagram of how I think this should be hooked up, which I am fairly certain is correct.
View 9 Replies View RelatedOS X :: External HD Won't Mount, But Shows Up In Disk Utility?
Sep 12, 2009I installed SL two days ago and my LaCie firewire external has been working fine. i put it to sleep last night, and when I woke it up today, I got the warning telling me that I had disconnected it improperly (Which I hadn't, because the computer was asleep and the drive never was turned off). This has happened before and I usually am able to shut it off then turn it on again. But this time it won't mount. It shoes up in Disk Utility and System Profiler, but not in the Finder.I have tried switching firewire ports and restarting but to no avail.
View 3 Replies View RelatedMac Pro :: Second Hard Disk Fails To Mount At Reboot
Sep 20, 2009My Mac Pro ("Cyrus") has two 1 TB hard disks. When I reboot, only the first of those disks (also named "Cyrus"), the one with the system and home directories, mounts on the desktop. The second disk ("Virtual", need a better name, any ideas?) does not appear in /Volumes and doesn't work until I mount it manually in Disk Utility. This behaviour is seen consistently, i.e. after every reboot. How can I convince Cyrus to mount both disks?
View 2 Replies View RelatedOS X :: Unable To Mount LaCie Little Disk 320gb?
Mar 15, 2010I bought the LaCie Little Disk 320gb about a year ago and it has been working fine till recently..
The problem that I have is that the laptop that I use (Powerbook G4) doesn't recognize the HD anymore..
I have tried all cables (both firewire's and the usb) but nothing works..
I did try it on multiple computers (macbook's / imacs and even some windows computers) not one did recognize it.
(well the windows computer I used it on did recognize it but it cant open it and Windows Explorer stops working till you pull out the HD).
The only think I can think of is that I pulled out the HD to many times without safely removing it first..
I got a lot of data on the HD and I'd (offcourse) like to get it back,
I haven't been to the store yet (going somewhere this week).
OS X :: NTFS Hard Disk Mount Location At Mac
Aug 2, 2010I really need to know where a NTFS disk is mounted at a Mac. Don't say the Desktop, or something like that. I need the mount directory. CDs/DVDs and pendrives are mounted at /Volumes. Where are NTFS disks mounted?
View 2 Replies View RelatedSoftware :: Mount Disk Image At Start Up?
May 1, 2008How can I tell Leopard to mount a (sparse) disk image at system start up?
View 1 Replies View RelatedSoftware :: Disk Images Failed To Mount
Oct 31, 2009I want to install a file " divxinstaller.dmg" but I get a warning pop up window that says "the following disk images failed to mount....no mountable file system". I have a imac g5, with os x 10.3.9. I am only installing this divx.dmg program because I was told that it would fix a problem I have with my quicktime player. When I try to play avi files that I have. All I get is the quicktime player opened with the correct movie time code and viewing format size but I get no sound and no image, just a white screen.
View 3 Replies View RelatedPower Mac :: HDD Won't Mount And Disk Utility Cannot Repair
Feb 17, 2012933 mhz quicksilver primary HD which has 10.5.8 installed, won't mount and disk utility cannot repair, have second HD with 10.5.8 installed, but need primary to mount to retrieve data.
View 2 Replies View Related