My apologies if this is covered elsewhere, but I haven't been able to find a topic that answers my question - if there is one please let me know.
I would like to use my AE purely for remote speakers for itunes. This works fine if I select the AE as my network via Airport on my macbook, but then this means that I can't access my wireless modem and therefore the internet.
Any hints on how to select the AE purely for itunes and still be able to go only online?
Ultimately the reason I want it is that I plan to do a lot of travelling abroad next summer and my only truly portable device is an iPhone. Which has no network port. Most of the hotels I'm planning on staying in will have free wired network connections but no wifi at all (I have asked) so I'm hoping that I can use the Express to get connected with my phone. I've checked online and found a few other people doing this too and I'm happy with setting it up, though any anecdotes about success/failure would be interesting to add to my mental list.
Since it's not a cheap device I thought about using it at home when I'm not travelling, and came across the Airtunes feature. Ports permitting (have to check tonight) would this allow me to use my TV's built-in speakers to play my music in my living room or does it have to be a standalone? I only have some very tinny USB speakers with my computer so this could be a decent alternative to my current setup, which is streaming my library to my PS3. Any suggestions here again gratefully received.
Final question - I'm not that knowledgeable about wifi. Is anything in the pipeline which would make an Airport Express upgrade in the next ten months likely, or should I be find on the current model? I'm happy with the spec as is, I just don't want to buy it then find out that some brand new wifi technology reaches the mainstream in a couple of months' time and renders my purchase completely out of date. If the only boosts are likely to be cosmetic/price then I will go ahead and buy now to give me plenty of time to get used to it and take it on test runs on trips.
My third Airport Express in less than four years has just given up the ghost which has made me realise that they're very cheap, badly made pieces of crap. I'm currently borrowing my parents' Linksys Wifi router which has much greater range (covering my entire house - suddenly I can check emails on the loo!) and has also confirmed that all the internet problems I was having was in fact the APE and not my MacBook Pro or Snow Leopard.
So my question is: can I send my iTunes music from my MBP to my hi-fi over my wireless network without the need for an Airport Express?
This is a pre airport express purchase question. Is airtunes software loaded on a computer, software in the airport express and is it included when you purchase an aiport express or is it software that is needed to be purchased seperately?
I'm quite happy with all the apple products. Yesterday I bought the airport, for the reason to play video's (MKV format) visualy on my MBP, while i send the sound thrue airport express (airport) to my remote speakers.
I feel I'm "tricked", because this is the reason why i bought the airtunes. Only to find out it -like it actually advertises- really only plays sound thrue itunes. I do not want to trick my files to have itunes be able to play the MKV. (Besides, even if they play, the sounds stays on the laptop, whether i click sounds to the airtunes or not..).
Is there a simple -FREE- way to do this? I feel scammed for using airfoil, since they charge money for this option
As much as I hoped i wouldn't be alone with this questions, i can find little info about this. I've searched the forum and couldnt find it, nor is there a clear answer thrue google)
I currently use my Airport Express as my wireless router. It's also plugged directly into my stereo so I can take advantage of AirTunes, which I love to do.
I was thinking of purchasing Time Capsule, but I suppose there's no way I can take advantage of it's 802.11n capabilities and continue to use AirTunes on my network?
I've had an Airport Express streaming music to my kitchen for a good year or so, and it's worked great until recently. Now it seems that 4-5 times per song, the music will cut out for a few seconds!
The only thing I can think of that's changed lately is I installed the latest version of iTunes and Apple TV software on products.
Is anyone else having such a problem lately, or does anyone have any advice on a fix?
I'm looking into purchasing a modem through our phone carrier that will allow me to use internet at my house (much cheaper than the monopoly of cable internet). I was wondering if I can somehow make that 3g network modem wireless with my airport express so that I can use the internet wirelessly on multiple computers throughout the house (including appletv).
I have a specific problem that I have tried to research and correct, but still no solutions. Here it is:
I currently have a wireless setup in my house using the IMac as a base station. I have this setup through the "Sharing" tab in System Preferences. I have an ITouch that I then connect to this network and surf the web downstairs, etc. It works great!
I purchased a new Airport Express that I want to plug in downstairs next to the stereo and then use Airtunes to play music over the stereo downstairs. This Airport Express would connect wirelessly to the IMac base station, just like the ITouch does. I also need to still be use the Itouch with this configuration.
i'm getting message that says "an unknown error (-15006) occurred while connecting to the remote speaker" right after my macbook wakes up. i tried that solution, but it didn't help. It's not a big deal, cuz after i press OK i can select my remote speakers from iTunes again and it'll play, but the problem is that i'm using app "Alarm Clock 2" and i need it to play though my remote speakers. obviously, if that error appears iTunes won't start playing, and i won't wake up))))))))
My question: did anybody encounter that problem and is there any solution?
P.S. sometimes error window doesn't appear and iTunes app plays through internal speakers normally, although it displays that it plays through the remote speaker.
I've changed my airport express name, but iTunes still displays the old airport express name on the Airtunes (Airplay) list. I couldn't find a way to fix it.
I have step up Airtunes (Express) and it works fine from computers on the LAN connected via ethernet, but the one PC it doesnt work well on is in the kitchen (wireless with a 90% connection N). The express obviosly has a good connection otherwise it wouldnt work on the other PCs. It seems that the way iTunes works is that if you play music from a shared location (we have a music server) it doesnt stream the music direct from the source to the express, the music travels via the PC with which is controlling the music (which is a bit silly?) Due to this, the Kitchen PC doesnt work well, but if when clicked play, the music went straight from the source to the express it would work fine
I have an Airport Extreme in my living room along with my surround sound speakers hooked up to my tv. Could I hook up my speakers to my Extreme instead of having to go out and buy an Airport Express?
I have AVG Firewall and I can't seem to figure out how to allow Airtunes and Airport Utility to get through. When I open Airport Utility, I can't find my Extreme or Express stations. When I open iTunes, I don't see an option for Airtunes. If I turn off the firewall, all is well.
I don't have internet access at home, instead tethering to my iPhone via USB when needed. However I do have a local Airport network set up for Airtunes streaming. The problem is that if connect to my Airport network, my computer no longer connects to the internet via USB tethering since it apparently expects to connect over wifi. Is there a way to simultaneously be online via USB tether AND stream music over Wifi? I'd also like to be able to print over wifi, but that's less of a concern.
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info: MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
I recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
I have an Airport Express and when I go to configure it it does not appear on the list of available networks. I have the AC plugged in and ethernet cable from my router attached to it. I get nothing! The light on the AE is green but my iBook G4 can't see it. From what I've read this looks to be a fairly simple plug and play operation.
