i have a power mac g4 m5183 that i inherited, as well as a m7649 monitor. when connected, the mac turns on but the monitor does not, I also don't see a button to turn on the mac monitor. how do i turn on the monitor?
View 8 Replies
I am dog/housesitting for my inlaws. Yesterday, before I left my house I shut down my iMac as always and for the heck of it, unplugged the computer, modem, and router stopped home today, and decided to hop on the computer real quick. plugged everything back in and the computer will NOT turn on. No noise, no lights, nothing. It was fine yesterday--I shut it down, unplugged it, and plugged it back in today---now it is completely dead! So I tried other plugs and no dice. Never had any power or shutdown/starup issue before. I called Mac---but outside of driving an hour to the Apple store--it wasn't much help. The guy did say it was most likely the cord. I would be wiling to try that--as it would be a cheap option, but it looks like I may have to drive to the Apple store anyway to get a cord that fits. I also tried resetting the PMU that Apples site recommends--and nothing. Any suggestion would be great. With the holidays the thought of dropping big $$$ on computer repairs is not appealing.
View 4 Replies View RelatedThe displays on my flat panel iMac G4 (2003) suddenly have gone 'red': sometimes it will return to 'blue' and be ok. Is this a dying flat panel or can I fixit?
View 6 Replies View RelatedMy Mac G4 cannot boot from CD, it show kernel panic message when it start booting from CD, the hardisk no problem, but it can boot from firewire connected external hard disk.
View 4 Replies View Relatedi've been searching for a way to use an iMac G4's LCD Monitor as an external monitor for any other computer. So far i haven't found a solution for it, so during my search i read that it is possible to remove the LCD display from the iMac G4's case and install another LCD display that you know for sure it will work on any other computer. So, my question is, is this possible? if so, what LCD monitor would fit in the case? i know that there's a problem when trying to pass the wires through the arm, but i think i can handle that since i already tried with some random cables, so if you know of an LCD that could fit in the case.
View 3 Replies View RelatedAfter doing a software update my flat panel G4 won't start up. Spent 30 minutes on the phone with Apple and nothing.
View 1 Replies View RelatedI have a 700 MHz iMac flat panel with 1 GB SDRAM and running OS 10.4.11. Almost every time I go to do something, I get the spinning ball and have to wait before it performs the action. I even get the ball briefly when I click OK on a dialogue box. I have run the disk utility to repair disk permissions several times, but that doesn't seem to help. What can I do to get the Mac to run faster as it used to do?
View 3 Replies View RelatedMy Cinema, which I just got this week is connected to my Macbook. So = Is the Cinema off when it will show the white light or when it's dark with no lights at all? I kinda think its when the screen is black without the lighting because of the pulsing light on the macbook, but just wanted to make sure, 'cause I'm a "green"-guy!
View 4 Replies View RelatedDoes anyone know if the panel used in Apples 24 inch Cinema display is the same as the 24 inch iMac?
View 3 Replies View RelatedI just bought a Dynex 26" flat panel tv and hooked it up to my mac g4 using VGA cord. I selected VGA as the input with the TV's remote, but after the initial Apple icon shows up when I start the Mac, the TV then displays the "No Signal" box. I do not have the TV hooked up to my digital cable box, as I have no connectors for that. I only want to use it for my Mac. Thanks for any help.
View 4 Replies View Relatedi recently purchased an iMAC g4...i love its great esthetics, but have been having trouble streaming netflix movies, Now i know its kinda old, heck its ancient in the IT community, but its my budget mac...and i love it! Im running macos x 19.4.11 and was wondering if that my be the issue?? also when i stream youtube videos, the vid's sort of stutter/ delay a bit..
View 2 Replies View RelatedI know that's below the required speed but there's Leopard Assist. As can be seen on that page, it says "Uncertain" ONLY for my iMac.
Has anyone done it with this iMac? Does anyone know? I'm running Panther now and, these days, that's no place to be. I want to get Leopard on my Mac before I have to <shudder> switch back!
How do I connect a newer 2011 27" iMac to a flat panel via a Thunderbolt to HDMI cable? I've already tried this with two different brands of flat panels (RCA and Samsung) and both get no signal. The iMac does recognize the model of flat panel connected to it, the flat panels do not recognize the iMac, nothing but a blue or black screen. Already tried powering down and resetting both the iMac and flatpanels, resetting the memory on the iMac, trying all the HDMI ports on both flatpanels. Nothing works.
Info:
iMac, iOS 5.0.1
The Dell SP2309W 23" Flat Panel Widescreen Monitor with WebCam is only $300, seems to good to be true. Is it a good monitor, in the same league as the HP LP2475w or the Apple 24" LED display?
I can definitely live with the 23" and can't believe it's only $300.
i just opened my imac g4 1.25 ghz 17" (lamp imac) and found a wire that is taped at the end and apparently not connected somewhere.. as you can see in the pics, the one i'm holding with an orange tip at the tip.. i dont really know the history of this imac.. :c
is this a cause for concern on my part? i'm replacing/upgrading the dvd rom and hard disk.. that's why i saw that wire.
The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
I own 23 and 30" Cinema Displays. I like the 23 because everything is larger and easier to read than in the 30". I mostly work in Logic and love that I see lots of things on the 30" but the 23" is much easier on my eyes.Is there such a thing as a display with 2560x1600 (like the 30" Apple) but that is LARGER than a 30 inch so I can see everything bigger in Logic??? Maybe a 34 or 37"? Did a search but haven't come up with anything other than other 30" displays.
View 2 Replies View Relatedif i Connect my Macbook air to the apple Cinema Display through thunderbolt is the air getting power supply through the Display?
View 1 Replies View RelatedI just got my Cinema Display yesterday,But one thing, the USB ports dont seem to function "normally" i got my Mouses Bluetooth Dongle plugged directly into the back, and its not recieving it?
I also tried plugging my APC40 (midi controller) into the back and it didnt get recognized, it only works when i plug it directly into the MBP.Am i forgetting something?I did a full update on the drivers soon as i plugged it in too
I have an iMac 21.5 inch and I sm trying to find s dual monitor that can sorta match up to it's brightness and color quality but I don't want to drop and absurd amount to get an apple cinema display. So my question is what are my options . And what are the visual differences between LCD led and ISP displays. I'm very unfamiliar with all this so thanks for the advice and help. Btw I'm looking for a 22-23 inch display
View 2 Replies View RelatedI was lucky enough to check the online Apple Store at the right time yesterday, and came across a refurbished 30" ACD for $1,299. Ordered it with next day shipping, and less than 24 hours later (i.e. now), I've got it up and running. MAN�this thing is awesome I've been using a pair of 23" ACDs�both suspended via an Ergotron dual mount (which is great). Now, I've got some reconfiguring to do. If anyone would be so kind as to tell me if the following moves make sense, I'd be truly grateful. FYI, I've got an early 2008 Mac Pro (3,1), and I do lots of graphics work (mainly Photoshop + Illustrator, CS5�but increasingly dabbling in Cinema 4D�and no gaming whatsoever). Here's what I've been thinking about buying to "refresh" my 3-year-old system:
� ATI Radeon HD 5770 Graphics Card
� SSD (120GB Mercury Extreme Pro) + "IcyDock" mount
� 2 PCIe cards (both by Sonnet Tech.):
� Allegro Express USB 2.0 Adapter Card (adds 4 ext. USB ports)
� Tempo SATA E2P Serial ATA Host Adapter Card (adds 2 ext. eSATA ports)
� NewerTech Voyager Q- (SATA Hard Drive Dock)........
I've been trawling the net to find a review of the Apple Cinema Display by a professional who has used it every day for at least one month, to see whether the reflection on it is as off-putting as it looks in the store.
I went into the Apple Regent Street Store in London on Friday all ready to buy an MBP17 & an ACD24 but then when I looked at the Cinema Display I saw my own ugly face reflected back at me horrifically clearly... When I was trying out the various apps on the screen, even with a white background the glass was still very reflective.
Granted the Apple Store is probably the brightest work environment you'll ever see, but I need to know from people who own and use this monitor daily: is it as reflective as it seems and is that off-putting for your work?
My work requires very precise colour definition so if the reflections will get in the way of that then I'll essentially own a very expensive mirror/paper weight.
I have a gorgeous 24" ACD that I bought earlier this year for my MBP. The MBP was sold, so I now want to use this display with my hackintosh that I built.
I think this adapter will work, but I'm not sure.
[URL]
I'm not sure because the DVI end of the adapter appears to be female, and I need a male end to plug into my computer.
I'm not sure if I'm over-thinking, confused or just plain dumb. All I want to do is plug the ACD into my desktop.
by the way, I went to microcenter for this, and they pointed me to a 150 dollar adapter - plug the monitor into one side, of it and the other side goes into the DVI port of the computer. I'm hoping I don't need to spend 150
When do you think of that you can order the new Apple Cinema Display 27"?
View 5 Replies View RelatedI'm wondering how can I use my Apple LED Cinema Display with my PC laptop.
The laptop has VGA and DVI inputs but not the small Apple thingy.
I have a very lovely and presently not working Cinema Display 24 inches.
Here is what it is doing.
When connected to my Mac it shows up as a valid screen in the Monitors System preference and if I am not mirroring displays my mouse and windows can be placed in this 'space'.
However there is not any on LED power light nor does the USB/Firewire port function.
What is odd, is this is intermittent. It used to be dark for a bit but mostly on. Now it is dark 99% of the time, and occassionaly comes to life.
When it comes to life, it is bright, and clear. So the lamp is more than likely OK.
The power supply has been tested with another unit and it is not power supply (external) related.
I have thought it could be the inverter board which is a part I can buy cheaply and repair. However I was told my LCD is more symptomatic of the LCD panel being bad.
Apple wants a $450 fee to diagnose that would be applied towards repairs, but at that cost, it is almost worth getting the new LED model. I would prefer to fix it in a more economical manner.
Does anyone know of what could be causing my set of symptoms and/or a reliable LCD repair source preferably in the NY/NJ region?
I would prefer to have some idea of a diagnosis before I go and buy invetertor boards and A/D boards. However I can replace the power supply, inverter and A/D board for under $300 so that is abetter option than Apple's. However if the LCD panel is in fact dead, then it is a lost cause. New panels are very hard to find.
I plan to buy a 27 inch Apple Cinema Display to connect my 13 inch Macbook White too. I also plan to wall mount it and use it to run my ps3 through. I've looked around on the apple store and found the Belkin AV360 to use. I was just wondering if there are any issues I should be worried about? PS3 on a apple display sounds sooo good Also I want to use wireless headphones for sound on the ps3.
View 16 Replies View Relatedhave been looking around online on how the best way to connect my new Mbp that arrives tomorrow to an old apple LCD cinema display that my dad managed to save from redundancy from one of his work clients. (am being given the screen).
I know there is a mini display port to dvi adapter sold by apple but it has very negative reviews, and wondered if anyone has any better suggestions for a way that i could connect it?
So is there a way to make it work?
View 6 Replies View RelatedFrustrated. To my excitement, I purchased this display last week. In my previous thread, I posted that it looks stunning and works as it should. Well, last night I was using the display, then I noticed a color change on screen. Overall tone of the display turns "greenish" and turns back to normal. A few moments later it turns "cooler" then back to normal. The "discoloration" is for five seconds or so. And it's very irregular. I might be over-stating when I say discoloration, but the overall color changes back and forth. BUT not all the time. I thought my eyes were wrong. But the problem is, it's not a constant issue. If my screen was flickering or had distorted images I could understand that it's defective. The symptom that I just explained doesn't even happen unless I use it for hours. So these might be issues with this:
1. Running it too long. I've had the display on and was working on it for hours. But then, why won't I be able to use it for hours? Even if I had decided to keep the display at full blast for hours and days, this shouldn't happen.
2. 10.5.6 update. I have no conclusive evidence that the recent OS X update had to do anything to my mini display port and external monitor capabilities, but since some have reported issues with it, it could be the cause.
I would hate to drag it down to a local Apple store to meet with one of the genius guys or ship it in for a repair/replacement. I already know what's going to happen at the Apple Store; one genius guy would ask what the problem is and after I explain it to him, he won't see the problem in front. And repair/replacement takes too long.
