I just got an AirPort Extreme BS (Older one from a friend) and want to transfer files from my G5 iMac to my Intel iMac. Can someone run me through the basic steps? I'm new to this personal network thing.
View 2 RepliesI need a little help with transferring files between my MacBook and my iMac on my wireless network. I'm using an AEBS (the newest one, just got it last week) and both computers connect to it through their AirPort cards. After fooling with my router for about 30 minutes after I got it I was finally able to connect to the internet, and after about 6 more hours I was able to wirelessly print so yea, I am pretty much a noob when it comes to wireless networking.
So my question now is, what is the easiest way to transfer files between my two Macs on my wireless network? I've tried copying files into my "Public" folder on one Mac and then accessing it on the other and that works fine sometimes but it's too time consuming and file permissions are killing me! Do I have to set the permissions on each individual file or folder so that all users can read and write to them when I transfer them? And better yet, can one Mac ONLY access the files in the "Public" folder of another?
First of all here's my setup: 30d/4u Charter internet coming in through my Linksys modem, from there to port 1 of my 2006 Intel Xserve running NAT and DHCP, out from port 2 of the Xserve into my AirPort Extreme running in Bridge Mode, and then out to my other devices.
My AirPort setup is as follows: Internet tab-DHCP, address set by Xserve; Wireless tab-Create a wireless network, WPA/WPA 2 Personal; Wireless Options...-5 GHz network name is not checked, Radio mode is set to 802.11a/n-802.11b/g/n (Automatic), both 2.4 and 5 GHz channels are set to Automatic; Network tab-Off (Bridge Mode).
I am transferring 100+ GB of data across the network to my Xserve, but it is only Xferring at 5.5 MB/s, or around 44 Mbps, which isn't even at wireless-g speeds. My iMac is the Mid 2010 27" BTO w/ 2.93 i7 and 8 GB of RAM. It is also wireless-n compatible.The Xserve is wired and they have had gigabit NICs since the G5s.
Things I've tried: In Wireless Options... I tried turning Radio Mode to 802.11a/n-802.11b/g and leaving 5 GHz network name unchecked, but the speeds were down in the 2 MB/s range. Again in Wireless Options... I checked the box for 5 GHz network name, and left Radio Mode in Auto, joined the 5 GHz network on my iMac, tried again, but again only 2 MB/s or less. In Wireless Options... again, I checked the 5 GHz network name box, and set Radio Mode to a/n-b/g, but ocne again, it ran at 2 MB/s or less. The AirPort Extreme is model A1354, which is obviously 802.11n compatible, and the iMac is also 802.11n compatible.
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro
1 Airport Extreme
1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
Here is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I have a Lacie external hard disk that was originally formatted for PCs. I have some files there, but more importantly, my iTunes library is saved directly on the Lacie (I have everything on apple lossless, so they are some big files). I will keep using this PC while connected to the Lacie hard disk to syncro my iPod.
The problem is that I bought a mac now and I wanted the Lacie hard disk to be able to transfer files from mac to pc and vice versa. I have already read that I would have to copy the files that are on the Lacie, reformat the Lacie and then paste the files back. My only doubt is that if I do this reformatting, will I have any problems using the iTunes library while connected to my pc and iPod?
I just ask that because every time I changed any iTunes library folder on the computer, the iTunes would say that the music file couldn�t be found and ask me if I wanted to look for the file. I didn�t want to reformat the Lacie to later find out that I would have to �look for� every single music file, because that would be nearly impossible. I don�t know if I was able to make my question really clear�
I'm banging my head against the wall with this problem. I have a new MBP 13", 4GB Ram, etc etc. When I transfer files across my network (or the office network), it will consistently fail to transfer a few of the files. For instance, I just tried to copy 50 photos to an SMB share on our server here at the office. The transfer window show the progress of 50 files, but when I look at the folder, there are only 48 files. Sometimes I get less, sometimes I get all 50. The same goes for my home network to an SMB share. I've confirmed this failure over N and G networks. The AP at home and the office are different models and I went as far as purchasing a new one for home since I thought it was the problem. Same results. Is there some hardware error going on here with my wifi card? Is there any way to test it? Are the SMB shares the problem?
View 2 Replies View Related I've decided to bite the bullet and upgrade to a 17inch Unibody MBP from the 15inch model. I love the size of the 15inch model but really need that extra resolution. I've got a buyer for my old laptop coming round tomorrow and I need to save all of my files and settings. My laptops been backing up to time capsule for the past month or so, will I be able to all of my settings from this or would it be a better idea to create a disk image and use that?
Has everyone else who's done the switch been happy with their new 17incher? I'm kinda worried that it'll be too big as the size of the one i've got now just seems perfect.
I just ordered my first iMac. (27" i7). When it arrives, I would like to transfer a few gigs (15-20) of data from my early '08 15" MBP to it. I won't be doing the whole Apple wizard transfer thing, as I only want a few folders, not all of my settings.
What would be the best way to transfer these files? I'm thinking firewire. My MBP has both the 400 and 800 port. Would this work well? How about ethernet?
I would like to order from Monoprice, as I still have a $40 store credit. Will this 800/800 cable work with both machines? I get so confused with all of the different cables they have.
I needed to make 40 dvd's. My burner is burnt out on my mac. I've created all the dvd's as iso files with iDVD. Now I need to transfer them to my PC that has a functioning burner. SOOOO... transferring 81.5 GB of data over a network will take days. Having said that, I'm using an unsecured network that drops out frequently. (I just moved in, it'll be weeks until the phone company can hook up my internet... we just had a hurricane and they're busy with repairs). Next idea, use a flash drive. Most of the iso files are bigger than 4Gb - so FAT32 is out. What's left?
which sounds promising, but once the files are split, how do I join them back together on my PC? Oh, and did I mention that this job is for a client and they're waiting on it. STRESS!!
Hiya everyone. You may remember my older post about picking a computer for my girlfriend. Anyways, we ended up going with the Whitebook, 2.4 ghz, 160 hd, 2gb ram refurbed. Tomorrow night I'm going to help her get acquainted with the OsX and such.
Anyways, nothing like a night of intimate file transferring. Can anybody tell me how to transfer huge amounts of data between computers easily? I know this is an incredibly newbish question, but i've only ever added stuff to my Macbook, and sent files to friends, nothing more. How can I mass transfer about 80 gb from a pc to a mac?
I've got a portable hard drive that I use for time machine and for backing up my music and video files on my mac. I've just purchased a new vista PC and would like to transfer the music I've got (around 30 gigs worth) and the videos I've saved (an additional 30 gig) onto it, however when I plug the portable hard drive into my vista pc it doesn't recognize it?
View 7 Replies View RelatedI followed the instructions on the migration page but after typing in my iP address and share name in Connect to Server it asks for a Name and Password. I tried every combo I can think of and nothing works. What do I do?
View 9 Replies View RelatedSo here is the deal: My father is transferring to a mac, but he wants the outlook stuff to come with him, and he picked me to arrange that:
1) I want to transfer Outlook files to Mac, contacts and adress book will manage, but I want all the tethering of the saved emails (All emails saved in folders and sub-folders in outlook) to remain intact.
2) I searched and saw some shady way of renaming the files and messing around with them, don't wanna use that.
3) I downloaded trial of 02M by little machines, but that could not connect to outlook and they don't really offer support. (installed latest updates from MS etc.)
4) haven't tried Thunderbird, but I think it just won't do the job.
I'm new to this site and I've been looking at it the past couple of days and decided to register. But my question is I have a MacBook running 10.4.11 and I have another MacBook running 10.5 is there anyway to transfer files between those 2 computers? Or no?
View 14 Replies View RelatedI need help with transferring files on my mac to my vista laptop, I have looked online and can't find anything that can help me.
View 1 Replies View RelatedI have a Windows 98 laptop where I have a large amount of files (pictures, documents, etc.) that I have saved. I am wondering how I can transfer all of those files to my Mac OS X. The Windows 98 is not connected to the internet, so I am unable to do it that way (or it would require a considerable amount of time to e-mail files back to myself, much more time that I am willing to spend at this time) and I tried using a 3.5" floppy disks to transfer files to a Windows 98 computer that was connected to the internet, but the laptop could not read the disks. Additionally, the Windows 98 does not have an ethernet adapter but it does have a UBS connection.
View 2 Replies View RelatedI bought a UMB this past November and love it except I fell victim to the poor screen quality. I am very impressed with the new notebook lineup. It seems like they are now what they should have been in the first place. I am attempting to sell it and purchase a new MBP. I think I will go with the 15" since the larger screen is more affordable and would be worth it to me.
Now, if I get the new machine, what is the best way to transfer my files such as iTunes and iPhoto libraries, etc? I use Time Machine. I don't want to simply transfer all of my files and settings... I want to be somewhat selective as in I don't want older clutter on my new machine. So do I just plug my external hard drive with my time machine backup and I can pick what I want or do I just drag what I want saved to my external HD and drag them onto the new machine.
I am trying to transfer my user settings and music/photo libraries to my new MBP from my old Alu PBG4 (running 10.4.11), however migration assistant was unsuccessful over the wireless network (which i have a feeling may be because of the old PBG4). The old PBG4 only shows options for using a firewire cable with migration assistant, however when using the MBP it responds to the authentication code sent out and starts the transfer, but gets hung up after about 5 min.
I also have an external HD with a copy of my entire system, but can't figure out how to give the migration assistant access to it. Do I need to create a startup disk on my external HD for this? If so, how exactly do I go about doing that? I'd like to transfer only my itunes library with playlists, iphoto library w/ albums, and safari bookmarks, everything else can start fresh.
I have got the remote login enabled on my mac and I am able to successfully SSH to it from a Windows machine using Putty. Although once I have established the SSH connection, I want to be able to transfer files via it, and I know this is possible using get and put commands. Although when I'm in the SSH terminal via Putty, and I type 'get <filename> <filename>' it says that get is not a command. The same thing is with put.
View 3 Replies View RelatedHow do I go about moving files between my macbook pro to a windows based laptop, I am forced to do this because I cant transfer files bigger than 4.5gb on an external.
View 5 Replies View RelatedI have an old MAC Powerbook G4 and I think the OS system (which is OS 10.2) is corrupt because it will not go past the apple on the screen to boot up. I would like to transfer some music in my iTunes library on that computer to my PC (which has Windows Vista) I have seen a tech hook this old MAC up to something and i think he was using Firewire and shazaam it showed a bunch of my files on the screen that I have seen nothing but blackness, an apple, or the thing that comes up on the screen when I hold down "T" while booting up. I have hooked both computers up using 6 to 4 Firewire and the MAC is not seeing anything. How did that tech guy get my files to come up on the screen available for transfer?
View 6 Replies View RelatedI have been using an iMac G4 for some years but have recently acquired a G5. How might I best transfer files from the old computer to the new one? Is there a quicker solution than filling memory sticks or sending email attachments to myself?
View 7 Replies View RelatedI have an old G5 PowerMac, and would like to network this with a PC running XP so I can transfer files easily. Is this possible via ethernet and a shared folder? How would I set this up?
Info:
PowerMac, Mac OS X (10.5.8)
Of course I am happy with my G5 (12.1/PPC3.1), but during the whole process of upgrading all the way up from my Macky 512, lots of data, that took me more than a decade to collect, have been left alongside the road. I still have a SCSI HD here, with 12 years of accumulated files, to which I no longer have access. Is regaining those files as simple as buying a SCSI-to-USB cable or should I expect a complicated and problematic procedure ahead of me?
View 1 Replies View RelatedI'm trying to be able to access my Windows HD (loaded with Win7) from when I'm booted in Mac. I can move files from my Windows HD partition and drag them into any folder on my mac, but I can't do the reverse. I'd love to be able to drag a powerpoint from a folder on my mac but it won't let me drag it to a windows folder (some of which have little lock icons on them) and says access denied. I thought I made sure I have read/write access so I don't really know what is wrong. I'm aware I can't access my mac partition from when I'm booted into WIndows but I'd be really appreciative if someone would let me know how to drag files to and from the windows partition while I'm booted into mac.
View 2 Replies View RelatedI have a Power Mac 8600 OS 8.1 and would like to transfer files to a New Imac OS 10.5.6.
The 8600 has a built in 100 zip drive. I was thinking of buying a used Iomega 100 mg external zip to use on my Imac to transfer the files via the removable disks. Will this work?
When I try to send/get (or someone else does on another alum. MB) via Bluetooth, it just hangs on preparing file for transfer and doesn't do anything further then that... With both small and large file sizes.
View 4 Replies View RelatedI recently moved my WD 1Tb HD from my PC to my iMac which recognised it and it's files at once. However when I try to move any files from my iMac to the external drive, I get the following message:The item � � could not be moved because �WD My Book� cannot be modified.I have no idea what this means (I'm a relative Newbie to Mac) can anyone help me?
View 8 Replies View Related