Hardware :: Time Capsule - Direct / Wireless Internet - Difference?
Nov 19, 2009
Does it make a difference in speed if I have the time capsule connected directly to the internet, opposed to it connecting wirelessly? I'm still backing up and using the Time Capsule wirelessly from my computer, but I have the internet plugged directly into it- making a wireless network for my laptop to pick up. Does it make a difference? I would kindof imagine that it would only make much difference if I plugged my laptop itself to the Time Capsule directly, since wireless internet speed doesn't seem to different on it's own anyway.
I'm soon to start working from a shared office and my internet will be gained wirelessly from a shared router.As I cannot modify the wireless network as it will interfere with everyone else Can i simply attach my time capsule via ethernet direct to my macbook pro, so that it does all the backup goodness and yet still have my wireless internet conneection open.
MAC to TC wired with MAC to INTERNET Wireless Without interference.
I was using a Western Digital 1T hard drive connected to my Time Capsule USB port. It was set up as Allow file sharing with Time Capsule password. I would like to stop using it here and directly connect it to my Macbook Pro (by firewire). When I try to do this, I can see the drive but get a message that I do not have user permissions to access it. I can't seem to figure out a way around this. Is there something that I can change so that I can directly access the disk? Do I need to reformat the WD drive in Disk Utility to be able to use it directly again?
I just picked up a Synology DS211 NAS and have been using my roomates' wireless router to connect to my 15" MBP unibody (OSX 10.6.5) and it's been working just fine but I need a faster connection to the NAS for the work that I do. I succesfully got the NAS to connect directly to the MBP through ethernet but I lost my wireless connection to the router.
I basically know someone that is selling the 500GB Time Capsule which has Dual Band Wi-Fi etc, this is the link for it on the Apple refurb website http://store.apple.com/uk/product/FB764B/A All I want to know is, apart from the obvious 1 or 2TB of space available in the new versions is there any other differences? Both are 802.11n and are dual band. What I have noticed thought is that there are refinements which allow it to be backed up 75% faster than the previous generation and it says there is a 50% better performance over Wifi with 25% greater range?
How is this possible if they are both 802.11n? Also Is this true even when connecting via Ethernet? In terms of when I backup over Ethernet will it be 75% more faster? It'll be on my desk so I don't really care about the wireless capabilities. Lastly, will it work with my network, please click on this link as it explains my setup. http://forums.macrumors.com/showthread.php?t=853136 So just to reiterate, will I notice a difference in back up speeds when connected via Ethernet between the two versions. I'm getting it quite cheap, for about $50 Brand New sealed.
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
Just got my new MBP which I want to migrate my old one too. Is it better to ethernet the computers up and use the migration assistant or use my last time capsule back up? Or is there no difference?
For almost the last year I have been using an Airport Extreme on 2.4b/g and and Airport express in my room to extend my wireless network. I also have a usb hdd configured to back up my macbook using time machine. Well I have a new roommate moving in and he has his own extreme and two expresses.
I have some questions on what would be the best way to consolidate our networking devices. I considered us selling our extremes and getting the new time capsule so both of our macs can use 5ghz while my girlfriends dell uses the 2.4.
Is there a noticeable speed difference between time capsule backup vs hard drive to extreme connected via usb?
Just to clear it up in my understanding. The time capsule is obviously used as an external hard drive. But also you use it as a wireless router too correct? You need to hook it up to the modem to use it as the wireless router just like every other router correct?
I currently have a Sky provided D-Link modem router that provides my wireless internet (in my lounge, as this is where the phone line is), and the Time Capsule sits nicely out of the way in my kitchen, wirelessly backing up via Time Machine. My wife would like to sit in the kitchen and work on her laptop, but her company's IT policy means that she can only connect via Ethernet. Currently she has to connect to the D-Link in the lounge and sit on the floor. Is there a way of connecting her laptop to the ethernet ports on the back of the TC and then wirelessly connect to the internet?
Basically I have a PS3 (silm, if that matters), and a Time Capsule connected to my router via ethernet , and Im using the TC as the network, called "PamaJama". Basically it connects fine when I connect via ethernet, but when I try to use it wirelessly, "PamaJama" doesent show up. And When I go to put it in manually, it doesnt ask for a name... I know the password is a WPA2 Personal, and that doesent come up as a catagorie either. If I where to change the password to a WEP, would it show up? If yes, how do i do that? and if no, do you know what I have to do to get it to connect wirelesly? I can always just leave it connected via ethernet but I would love for it to connect wirelessly so i could play it up in my room.
I have recently moved house and no longer have access to a DSL / ADSL line but have successfully plugged a wireless USB modem (ZTE MF688+) into my desktop PC. I have a mac book pro and a time capsule which were previously networked but I don't know how to access the internet as there is no DSL cable to plug into the time capsule. Is there any way to use the Time Capsule to access the internet without plugging a DSL / ADSL cable in?
got my self a new macbook pro and a time capsule, but when i try to hook it up I can't seem to get it to print wirelessly with my HP Photosmart printer.Have the printer connected to time capsule by usb cable, my macbook recognizes the printer by make and model, but then says the printer is not hooked up.
I'm having a problem with internet access at the moment. I've got a Time Capsule which is connected up to a Draytek Vigor 100 ADSL modem. In the past 4 or 5 days the Internet has been stalling to a halt. I've discovered that if I go into the Airport configuration utility and choose 'Renew DHCP Lease' on the Internet page everything starts working again.
I'm thinking about getting a Time Capsule. But I have a question. I don't want it to be the main modem in my home. I want to use it to back up wirelessly, or through cable, my important data, e.g. music, photos, videos etc etc. Can I do this through the internet that is already in my house?
I've been trying to get this to work for a few days now, and can't get a solution that's both permanent and will allow me to send to friends/ colleagues. I want to access my TimeCapsule over the internet to get at my files. I have it connected to a Linksys DIR-615 router and the router to a modem. If someone could explain how to set up my airport utility, and the ports for the router, I would be happy. Explaining how to make my time capsule have a consistent IP that I could redirect my domain's DNS to would be amazing.
I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls.
All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors.
So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak.
So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router.
From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
I called Applecare who told me:
-To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
-Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
-Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
I have several questions for you wise people out there:
1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?: [URL]
Any information would be much appreciated! These networking issues have been giving me months of headache.
I've got a Time Capsule attached to an Ethernet network, which gets it's internet access from DSL. I can't seem to get the configuration I want. I'd like it to be part of the ethernet network, available to Macs on the network and I'd like it to act as a wireless access point for Macbooks and Macbook Pros. But when I go through the Airport Utility install, once I tell it it is to connect to the network, which already has internet set up through DSL, then it won't allow me to set up wireless. It's as if it wants to work one way or the other. And the instructions are confusing about which port in the back of the unit to insert the network cable. I did manage to get it set up and connected to the network, and to deliver wireless, but I ended up creating a "bridge" and doing things I did not quite understand.
I ended up creating a wireless network and I guess "bridging" that network with the ethernet. Maybe that's the right thing to do, I don't know. Maybe I'm just not understanding the terminology right. is "creating a wireless network" the same thing as merely creating a wireless access point for a wireless device to connect too? I guess I was thinking that they were two different things, maybe not. So, it's probably a simple thing, and I hope someone can just tell me in what way I am supposed to set up the Time Capsule. I know I got it working, but I can't even remember how after a zillion tries I even got it working right.
I've had my time capsule for several months now, and the wireless has worked fine during that time. A few days ago the power went out in my neighborhood (turned off by electric company for maintenance work), and since then I cant get my network to function correctly. Specifically, my macbook pro, wife's macbook, and my mini can't connect wirelessly to the network if i have any security on the network. If i disable all security they work fine. It also works fine if i connect directly with the ethernet cable. Occasionally i can connect with the WEP or WPA security on, but the computer will randomly lose all signal and not be able to connect again. This doesn't happen if I have the security settings disabled. I have reset everything several times, reconfigured the network from scratch, etc. I don't know if the TC is damaged in some way or how to check it.
I currently have a Netgear DG834G Wireless ADSL Router. I would like to purchase a Time Capsule and set it up as a wireless bridge. The Netgear is downstairs in the living room and has my Xbox, Xbox 360 and HD DVD player plugged into the Ethernet ports. My iMac and girlfriends MacBook connect wirelessly. My question is can I use the Time Capsule in Bridge mode and utilize the Ethernet connections for my iMac? This way backups will be much quicker to the Time Capsule. If anyone sees any areas in my setup that could be improved please let me know.
I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.Is a time capsule going to perform the same as a Linksys? Which router is better?
what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme? Is it easy to configure as a Linksys?
I have a router in one room that sends out a wireless signal. I want my time capsule to join that network and share the internet connection through the ethernet ports on the back. This way, I can hook up a voip phone in another room. Is this possible and how would you go about setting it up.
About an hour ago I was just sitting in my apartment working, when suddenly my printer starts printing pages. Some road directions to a place I've never heard of. Someone in my building must somehow have gotten access to my printer, right? My printer is hooked up as a USB printer to my Time Capsule, through which I've made a wireless network. I've just spent an hour making sure my Time Capsule and its network are WPA2 password protected, and searching forums for similar issues. Both the Time capsule and my network were password protected, though I changed the passwords again for good measure, and made the network invisible. No one could access my printer without also having access to my network, correct? (it's not a wireless printer, it's an older HP deskjet).
how this may have happened, or more important, how to make sure it doesn't happen again? Am I missing some security step I do notice that when I go into the Airport utility, I can see other people's devices-- some other Airport and base station. Is this normal? Is it part of the issue?
I begin uni next month and have been offered accommodation. My room won't have WiFi but will have a wired connection. I'm wondering, is it possible to - rather than connect my MacBook - connect the Time Capsule to this connection and create a wireless network? Also, is it simple to switch from one connection (my current WiFi at home) to another (the uni connection)? Finally, is it easy to switch from being connected via Ethernet to using WiFi (after initial backup for example)? The lack of WiFi would really be rubbish when I have an iPhone and Time Capsule.
First, let me explain my network setup: We have our modem >> wireless linksyss router >> rest of house. We have 4 laptops, 3 tivos, and then our phones/ipods (all wireless). We have my xbox 360 (wired) So here are my questions:
1) Once I move out could the time capsule be used as a wireless router? And if so would it work well enough? 2) Once I move out would xbox live work fine through the TC? 3) Could I access the content of the TC with my 360? (I really want to do this if possible) 4) If I had the 1TB TC and the backups didn't take up all the 1TB (obviously wouldn't) can I use the rest of the drive as a media server? Like to store my movies and all that? 5) Lastly, if I was going to use the TC with my current setup at my house could I use it like this: modem >> wireless router >> TC (>> = wired connection) Would that be the best way to set it up? Would that also provide the quickest speeds?
I have a 2006 Intel iMac (Running 10.6.1)that is not seeing my wireless routers (D-Link 628 and Time Capsule Dual-channel). The D-Link is downstairs. It is not in the best place, but at my only option. My Macbook Pro sees the D-link fine on the same desk as the iMac. I replaced the D-Link with the Time Capsule and the iMac doesn't even see that. If I bring it close (completely underneath the desk) to the iMac it will see both routers. The weird part is before a hard drive crash and replacement it worked fine (I know, I know something is amiss from the replacement).
my situation goes like this.. theres a router(main) which is connected to the internet modem and this router provides internet for the whole place. its located in my roommates room and he like it that way.
i have a time capsule which id rather connect to, since its got my time machine back ups and all my other files(which in total is 1.2 tb). i connect an aditional external and a printer to my time capsule which works perfectly fine.
now here the problem, iv been trying to find a way to get my time capsule to connect to the main router wirelessly, since my roommate dosnt want to move his router and he dosnt want all my stuff is his room. in addition we would like to avoid using a Ethernet cable.
