OS X :: Using Time Capsule To Access Internet For Older System?
Jan 18, 2010
I am the Principal of a school and because of budget cuts - scary piece ahead - also the tech coordinator. I have a few older eMacs, some with airport cards and some without. My question/problem: I want to hook an eMac 10.4.11 directly into the Time Capsule to access the internet (the time capsule is acting as an extension of our wireless network). I have done this before successfully using an airport extreme, however, I am not successful to date in doing this with time capsule. It has been a while since I set up a computer this way. My question is am I missing a trick (using ethernet cord into LAN port), or is it not possible.
I purchased a 500GB time capsule awhile back in hopes of killing two birds with one stone. I wanted it to:1) serve as my wifi base (which it is doing very nicely)and 2) Allow me to backup all my files on my macbook in order to free up some memory.I guess my question really is, once I've backed up all my content to the time machine (acting as an extra hard drive), is it safe to just delete the content from my macbook that I am ok with not accessing when away from my time capsule? For example, all that music I still want to keep but dont necessarily listen to on a regular basis? I am completely full on my macbook and need extra room. I dont anticipate filling the time capsule anytime soon.
I've been trying to get this to work for a few days now, and can't get a solution that's both permanent and will allow me to send to friends/ colleagues. I want to access my TimeCapsule over the internet to get at my files. I have it connected to a Linksys DIR-615 router and the router to a modem. If someone could explain how to set up my airport utility, and the ports for the router, I would be happy. Explaining how to make my time capsule have a consistent IP that I could redirect my domain's DNS to would be amazing.
I'm having trouble figuring out how to set up my Time Capsule. So I have two computers at home, a router and a Time Capsule. I mainly use the Time Capsule to back up my computers and transfer stuff between them. I also have roomies which I don't wanna give access to the Time Capsule without my permission, I'd just like to allow them to connect to get some files every now and then and that's it. That's been my problem, my roomies are having trouble with the internet connection because of my Time Capsule.
I basically know someone that is selling the 500GB Time Capsule which has Dual Band Wi-Fi etc, this is the link for it on the Apple refurb website http://store.apple.com/uk/product/FB764B/A All I want to know is, apart from the obvious 1 or 2TB of space available in the new versions is there any other differences? Both are 802.11n and are dual band. What I have noticed thought is that there are refinements which allow it to be backed up 75% faster than the previous generation and it says there is a 50% better performance over Wifi with 25% greater range?
How is this possible if they are both 802.11n? Also Is this true even when connecting via Ethernet? In terms of when I backup over Ethernet will it be 75% more faster? It'll be on my desk so I don't really care about the wireless capabilities. Lastly, will it work with my network, please click on this link as it explains my setup. http://forums.macrumors.com/showthread.php?t=853136 So just to reiterate, will I notice a difference in back up speeds when connected via Ethernet between the two versions. I'm getting it quite cheap, for about $50 Brand New sealed.
Is it possible to access my time capsule / airport extreme hard drive away from home? Like when Im at work? I do have a mobileme account, but cannot figure this out.
I recently bought a MacBook Air (my first Mac) - love it. Also bought a time capsule and have backed up onto it. I can't however access the hard drive on the time capsule, no matter how I try. It doesn't even allow access to the sparsebundle file that I see people describe.
I have a TC set up at home and it works fine, just looking to get more out of it now, if possible. I run a small business and I want a contract employee to be able to access it for file use in a windows program. He lives in another state.
1. How can I direct him to my TC via internet? He only works in windows. Basically, I want him to have read/write access to my TC. 2. Obviously if number 1 can work, then how can I, using my MBP, connect to my TC when I am away from it (not home).
Do I do this with IP addresses and workgroups? If so, I don't know how to set that up.
I picked up my first Mac about a 2 weeks ago and over this past weekend I picked up a new Time Capsule. Originally I bought the Time Capsule to wirelessly bridge to my Linksys router running DD-WRT (mega) but apparently the ethernet ports won't work on the Time Capsule or the Airport Extreme when connecting them to another party wireless router. So i have taken out my Linksys and am now only using the Time Capsule. The reason for the Time Capsule is to have backups on it and that for some reason I do have wireless issues with my Linksys that I am not having with the Time Capsule. Such as when I had a iPhone I would lose my wireless signle a lot and have to reboot, same with my iPad and sometimes with my Nexus One. So far none of those issues with the Time Capsule. I'm not missing much from my Linksys but one of the things I miss is being able to open up a browser from any network connection and being able to connect into my router. Is there a way with the Time Capsule / Airport Extreme to be able to access the configuration settings when not on the local network? Such a when I am at work I want to be able to access the configurations page.
I have been attempting to connect to my TC remotely, and I have not been successful. I followed the instructions posted here. But to no avail. I am able to connect to it as a server, but only from within my network. when I go to connect, it appears to be going through the internetz and connecting, but when I move outside of my network it does not work.
Anyone notice anything happening to their disk speed/transfer/access rates lately using a Time Capsule for a NAS?I currently use it to do two TM backups, and hold an iTunes store - been working amazingly well for over a year, and then a couple of weeks ago notice massive lags.The two Macs are using wireless, but internet speeds are as fast as ever... it just bogs down when you try to use a disk.So, couple other questions: Was there an airport firmware update lately that I installed incognito - and it's botched? Is there a way to install old firmware etc? Lastly, is there any way to run disk utility (or something like it) on a network drive like the Time Capsule? Maybe it's just clogged up or something?
I am connected to a wireless router downstairs for my internet connection. I am trying to use my new (bought second-hand on ebay) time capsule to store all my files on. I have installed the disk that came with it but when I try to find the capsule via Airport Utility it is unable to do so. The amber light is flashing like it is supposed to. I have tried using the ethernet cable also but my mac doesn't notice it
I'm having a problem with internet access at the moment. I've got a Time Capsule which is connected up to a Draytek Vigor 100 ADSL modem. In the past 4 or 5 days the Internet has been stalling to a halt. I've discovered that if I go into the Airport configuration utility and choose 'Renew DHCP Lease' on the Internet page everything starts working again.
I'm thinking about getting a Time Capsule. But I have a question. I don't want it to be the main modem in my home. I want to use it to back up wirelessly, or through cable, my important data, e.g. music, photos, videos etc etc. Can I do this through the internet that is already in my house?
I'm currently staying in university residence where our internet access is all through wireless access point through the building; in this environment, is it possible to setup a time capsule such that it connects wirelessly to the nearest access point and then allows me to connect to it (the TC) wirelessly or by ethernet (then get an address by DHCP in the TC or the access point)? I was hoping to use the TC as a backup for my imac and macbook, as well as a mounting point for drives I plug into it but thus far haven't been able to come up with anything that works ideally (i.e. tried connecting all my stuff to the access point but the backup worked way too slow over 802.11g to do anything realistically when its shared among many other people).
I have a new mac mini and a vista pc on the same network. I want to have my pictures, videos and itunes library on a time capsule so I can access them with my mac and pc. I will not be using time capsule as a backup drive. What I want to know is if I can use an external HD to backup my time capsule content. Would it be better to plug the drive to the capsule with usb or to the mac with fw800? The reason I want a time capsule and not a nas is because time capsule is a router at the same time, which means I save space on my desk and dont have to mess around with different components for my network to work fast.
I have plugged in an external hard drive into my time capsule via the usb input. I have a main router for my network and internet and time capsule is connected to this wirelessly. The external drive doesn't show up as being attached to the time capsule and hence I cannot access any files. What do I need to do to be able to access it?
I had a macbook pro with time capsule and was using the TC as a hard drive. Macbook pro logic board has gone so until I can get a new mac, i have a windows vista laptop. I have connected to the TC, wireless working, mapped the TC in the Z:drive. When I go into the TC drive, i can only see the backed up bundled data rather than all the other crap i have saved in there. I think I'm missing a stage somewhere, perhaps need to mount the drive through windows but don't know how. In order to access all the songs etc on the TC via my macbook, I had to 'Enter Time Machine'. Seems like I have to do this through windows but have no clue where to start.
Is there a way for a windows vista machine to access TC hard drive data?
Will I have to perform a reset and configure the TC to the windows machine?
I was using a Western Digital 1T hard drive connected to my Time Capsule USB port. It was set up as Allow file sharing with Time Capsule password. I would like to stop using it here and directly connect it to my Macbook Pro (by firewire). When I try to do this, I can see the drive but get a message that I do not have user permissions to access it. I can't seem to figure out a way around this. Is there something that I can change so that I can directly access the disk? Do I need to reformat the WD drive in Disk Utility to be able to use it directly again?
I recently got a new time capsule but I have difficulties setting up the internet connection. The time capsule is connected to our WAN using a cable in my office. The computers in our organization are authenticated using their MAC address. So, I have to add the MAC address of the time capsule to make it connected to the internet. I want to connect the TC to our WAN using a cable, then I want to connect my MacBook using a wireless connection to the TC.
When I config the TC using the NAT mode (Share a public IP address), I can use the internet but I get a double NAT error and TC's LED is yellow. When I config the TC using the Bridge Mode, the led goes green. Anyway, if I connect my MacBook using wireless I cannot reach the internet. I get no error in this case so I don't know what is happening inside the TC. Interestingly, if I connect the MacBook to the TC using an ethernet cable, it works perfectly! I have added all the MAC addresses of the wired and wireless interfaces to the list of my computers.
My time capsule drops its internet connection on a regular basis. Some times it will reconnect on its own. Sometimes I have to reboot the time capsule and the computer. Sometime I have to reconfirm the tc settings and once I had to delete the time capsule setting and reinstall.
The internet is high speed pppoe and the time capsule firmware is the latest version.
Have been using this device (500GB, Late 2008) for awhile with no issues.
This week, it has been dropping my internet connection at least once per day. This is both wireless and LAN. The green light stays on. To bring it back up, all I do is unplug and it resets, so I don't think it is the DSL modem.
after reading a lot manuals and threads I'm now completely lost and can't get it run.
This is what I'd like to do: 1. I have Linksys router set up as wifi hotspot 2. My iMac accesses internet via wifi via linksys 3. I'd like to hook time capsule via ethernet cable to my imac 4. i want time capsule to use my iMac's internet but extend at the same time the wifi internet access
a. Can I backup from iMac to time capsule via ethernet? b. Which settings I have to do on my iMac and which on time capsule to get my scenario run ?
I use my time capsule to transfer files between various computers, including ones that aren't on my same home network. For mac's, setting up filesharing over the internet works great, and I don't have any issues connecting to the time capsule remotely using [URL]
The issue comes if I try to connect a windows XP PC to my time capsule as a file server. I can connect one just fine if its on the local network, but I have been unable to do so for one remotely. Every indication I've seen online says that it should be possible to connect to via SMB, but I haven't been able to get it to work. Are there any specific settings that should be chosen either on the time capsule or on the PC to get it to work? Perhaps I'm not connecting to it via the PC correctly. Is connecting to it as a network drive at [URL] not correct? I've come across a few guides related to similar topics, but they all assume that the time capsule is just connected to your local network, and mine is also acting as my router.
I recently upgraded to OS 10.7 and now can't find my Time Capsule under devices to access individual files stored on it. The system is recognizing it under time machine and is doing full backups to it, but only the backup portion is accessible through Finder. How do I get back to where I can pull up the contents of the Time Capsule on an individual basis?
