Hardware :: New AEBS Real World Dual Band Performance
Mar 17, 2009
I am looking to buy a new AEBS to replace my Linksys WRT610N. The Linksys has dual simultaneous 5 & 2.4GHz capability as well, but suffers from constant disconnects and issues with both radios on at the same time. My question is to those of you that have the new AEBS with this capability and are actually using the dual network option. Have you had any problems with the new Apple unit? Any disconnects or other signs of flakiness?
View 6 Replies
ADVERTISEMENT
Jun 22, 2009
I'm sure there is a few people on here that have made the swap - is it worth it? Is the difference in speed noticible to warrant an upgrade.
My current setup:
2.4 MBPu
Mac Mini (coming soon)
Dell Inspiron
Canon Printer
Touch
Slingbox (hardwired to AEBS)
AE (old school version)
WD 1TB external (connected to AEBS via usb)
All currently connected to a AEBS wireless.
View 1 Replies
View Related
Mar 3, 2009
What does the dual band do for you? I was thinking about buying a second AEBS for Wireless N access only since mixed mode slows down when a G device is connected. Does this new AEBS get around that by having all the N devices at 5ghz and all the G devices at 2.4 ghz? I guess a basic explanation is in order here.
View 4 Replies
View Related
Mar 19, 2009
I've tried searching, but can anyone point me in the directions of how to set up and Airport Extreme (old) and an DI-524 (D-link) b/g router. I obviously am looking to turn my old AEBS into dual band. The two routers will be connected via Ethernet cable.
View 1 Replies
View Related
Mar 23, 2010
I have the latest AEBS dual mode. I want to use my previous non-dual N AEBS as an extension to the dual, but I want to run it in N mode only. When I set the non-dual up in bridge mode, Airport Utility won't let me choose which radio mode to use. Is there a way to set up an extended network which uses N only on the extension?
View 3 Replies
View Related
Oct 26, 2009
After the announcement of the Simultaneous Dual-Band II, I've taken an interest in getting the most out of my version. However, I've been noticing signal issues especially when using the 5 ghz network. I have it set to "wide channels", multicast rate of "High", deselected "closed network" and "interference robustness", and the transmit power at 100%.
I've adjusted the position of the router to avoid potential sources of interference, and when I go to select a network with the airport icon at on the task bar, my 5.0 ghz network is never at full strength. In fact, it rarely shows more than 2 bars. As I type this post, I am literally six feet from the AEBS and I have only 3 bars showing.
When I view the statistics within the Advanced Tab in the Airport Utility I am only showing a rate of 65 mbps on the b/g/n (2.4ghz) network and 270 mbps over the 5.0 ghz n network.
Does anyone have any idea how to get this thing going at full performance? When I'm in the adjacent room, I am rarely able to get over 200 mbps. I know a wall is in the way, but my apartment is modestly sized and it is very disappointing that the signal is this weak on this lil thing - especially given the fact that I've had it for just about a month and its been updated to address the signal issues.
View 4 Replies
View Related
Mar 10, 2009
I have tested the WAN to LAN speed and WAN to WiFi speed on Apple's latest Airport Extreme out of curiosity.
The test is done with two Unibody MacBook Pro; one connected to the WAN port, the other to LAN. The test was done over FTP with one of them set as server. A 85MB file was transferred
WiFi connection was draft-n, 5Ghz, Wide Channels.
View 3 Replies
View Related
May 29, 2009
Having come across this article the other day[URL], I decided to blow the dust off of my ancient, Netgear WR814v1 wireless router in an effort to optimize my home network. My primary router, an older AEBS (802.11n), had been using a ratio mode of 802.11n (b/g compatible) @ 2.4GHz, so that I could connect some not-so-new devices such as my iPhone3G and my Wii.
If i can configure this Netgear monstrosity to my current network and have it broadcast at 2.4GHz, I'd be free to bump my AEBS up to 5GHz and enjoy significantly faster speeds overall. The only thing connected at 5GHz would be this - my shiny, new 15" MBP 2.66. The Netgear unit would be set in bridge mode (or its ancient equivalent), and would handle the lesser capable gadgets, including the iPhone, which would still be able to be used as an itunes remote and all that other lovely stuff.
View 5 Replies
View Related
Mar 20, 2010
I've been trying to troubleshoot this and have yet to find a good configuration. I have the dual band extreme (not the latest) with the following wifi devices:
2 Apple TV's
MacBook Pro
Two Airport Express's (joined to extreme for remote ethernet connections)
2 iPhone 3GS's
PSP
View 1 Replies
View Related
Mar 4, 2009
I just bought one of the new dual-band AirPort Extremes, to replace an older AirPort Extreme (the last generation before this one). I exported my configuration from the old AEBS to a baseconfig file, disconnected the old AEBS, and plugged in the new one. I then imported the baseconfig file, only to find that although its light will turn green, the AEBS will no longer show up in AirPort Utility. To get it back, I have to do a hard reset of the AEBS.
Through painstaking troubleshooting, I have determined that the problem occurs if the configuration includes a port mapping for SMTP (port 25). If I create all of my port mappings (and there are many) BUT that one, then all is well; but as soon as I add a port 25 port mapping and Update the AEBS, it will not restart properly (green light but no one is home).
View 2 Replies
View Related
Dec 7, 2008
I bit the bullet and upgraded from a Rev A 1.6GHz 80GB HDD MBA - to a Rev B 1.86GHz 128GB SSD MBA. I wanted to post my observations on what it's like to upgrade - I know many Rev A owners have - or are thinking about - upgrading to Rev B. In this post/comparison, I refer to "Rev A" and "Rev B". The Rev A is my older 1.6GHz 80GB HDD MBA. The Rev B is my new 1.86GHz 128GB SSD MBA
Caveat - Unlike some (but not all!) Rev A MBA owners, I love my Rev A MBA. I've had zero problems with it. It runs cool and I have not experienced any core shut downs. It would heat up when most laptops normally heat up and the fans would kick. It would cool down quickly when I moved on to something else. With video it never stuttered... Perhaps my Rev A has run so nicely because I don't ask a lot of it. It is a second Mac to my Mac Pro - I use it primarily for email, word processing, iTunes movies and web surfing - on the couch and on the road. It has REALLY been a great laptop and I have nothing bad to say about it...................
View 17 Replies
View Related
Nov 1, 2009
Is it worth the extra cash to go up to the 2.13? I know it's a small amount, but that could be a new mouse, or a super drive. I've seen tests that indicate the rev b 1.86 is actually faster than the new 2.13. This will be my only personal mac. I'm a graphic designer (adobe cs4) but I don't do much design work on my personal computer (I have a nice iMac at work). The usual facebook, email, web browsing, YouTube
View 22 Replies
View Related
Nov 18, 2009
Just wondering if it's worth getting a machine with 8Gb of RAM over the standard 4Gb for things like video editing, aperture etc. Can most of today's apps even use 8 gigs of memory? I assume the biggest advantage would be for running a virtual windows machine within OSX and things like that.
View 24 Replies
View Related
Oct 30, 2009
I have a "My book Pro" 250 GB external hard drive spinning at 7200 rpm. This thing is dog slow. It takes about 5 to 10 seconds to copy about 2 megabytes. I have another drive that copies about 160 megabytes in about 5 seconds. I called Western Digital (the maker of the "My Book Pro") and they said that USB 2.0 transfer rates are about 2 MB a second! That is not true but he insisted. My question to you all is how can i win this argument with them? Do you know a formula that would give me real world numbers. In other words how to translate 480 megabits (the USB 2.0 transfer spec) into megabytes? Ive searched the net and cant find anything. Its messed up cause both drives have basically the same specs. Ive even tried reformatting to every possibility, ive switched cables from the fast drive to the slow drive. Nothings working. Im gonna call WD back tomorrow but i wanted a way to talk about what could honestly be expected from USB 2.0. I just cant believe that USB 2.0 tops out at 2MB a second. And to top it all off, todays call ended up with me getting disconnected so i called back and guess what, they were closed...that guys a DOUCHE. I really cant put my faith into Western Digital after this. Are there drives that are geared more towards professionals seeking performance and reliability?
View 5 Replies
View Related
Apr 14, 2010
This is what I'm thinking of going with:
2.53GHz Intel Core i5
4GB 1066MHz DDR3 SDRAM
MacBook Pro 17-inch Hi-Resolution Antiglare
I'm wondering specifically, but in general relating to games, how the performance is in World of Warcraft, or similar games.
Anyone have a similar config and some results?
View 16 Replies
View Related
Oct 23, 2009
Could any 27" iMac owners post their framerates for WoW here so we can get a feel for how the systems compare to the 24" iMac.
test and report back the following:
1. Processor, GPU, Vram
2. Videosettings used
3. Framerates (ctrl-r) at native resolution in the following locations:
a) Dalaran
b) Stormwind or Ogrimaar
c) 25 man raid
View 1 Replies
View Related
Dec 16, 2010
I decided I need a dual band router to improve connection among all the wireless devices in my house. Any recommendations other than the AEBS?
View 2 Replies
View Related
Mar 10, 2009
So I see from the product description that the Mac Mini has "built in Airport Extreme wireless N WiFi", but I'm unsure of what that means. Does the Mac Mini have dual band wireless N WiFi, or does it only operate on the 2.4 GHZ band?
View 9 Replies
View Related
Apr 8, 2010
I recently upgraded to the airport extreme dual band II. I then moved my old extreme (N with gigabit) downstairs. It joins the network that the dual band is running to supply internet to my xbox, game PC, and ps3. The Dual band is running the newest firmware, 7.5.1 and the 5ghz network is very flaky. I have been forced to give the 5ghz a different name and use the 2.4ghz G band most the time. If I am on the 5ghz band my connection will just stop responding. Sometimes it work for an hour, sometimes for 5 minutes. Rejoining the network will make it ok again. Although last night I transferred 30gigs over the N network with no problem. It's not a distance issue since the problem is no better or worse whether I'm 2 or 25 feet away from the router. This is really driving me nuts right now. I just want to have one network setup and have the N devices use 5ghz and the G devices use 2.4 and not have to constantly worry about it.
View 2 Replies
View Related
May 1, 2009
[URL:...] over on engadget today was this article, setting up a dual band (for those that havent yet bought apples new extreme). I have a question about doing this. Here is my set up.
1 mac mini - ethernet to router
1 printer, attached to mini, sharing on network
2 laptops using wireless n - main computers
1 laptop using b/g
2 iphones using b/g
1 express b/g to stereo
$10000000 to S. Jobs.
will doing this dual band set up essentially mean i have two independent networks? I would like to have my printer, mini, and wireless music appear on all set ups.
View 2 Replies
View Related
Jun 9, 2009
I have the wireless N airport base station (not the dual band) and I also have an old airport express (B/G only). Is there any way I can set up my home wireless network so that the express handles all of the B/G traffic and the base stations handles all of the N traffic (thus not slowing down my N stuff with the G stuff). If this is possible, would somebody be able to provide idiot proof, step by step instructions for me.
View 1 Replies
View Related
Jul 26, 2009
First, I have a SMC WGBR14-N router that operates only at 2.4Ghz. I have several different routers that are G only. Is there a way I can connect two routers and have one operate at G only and one at N only? That would make my network faster, no?
View 1 Replies
View Related
Oct 16, 2009
I have just got hold of an BT HomeHub2 and already have a single band Time Capsule. Having read a few posts it looks as though it's possible to use the HomeHub for my g devices and the TC's n network for my Macs. After hours of playing around I've achieved the following: BT HomeHub set up as one network and able to take g and n clients TC set up as a secondary network but limited to n clients.
My TC is connected to the HH via Ethernet and in Bridge Mode When on the N network the iMac has the same router IP as the iPhone which is forced on the HH network I was hoping that g clients on the HH Network would, via the Ethernet bridge, be able to connect to the clients on the TC n only network. However, with my current set up this isn't happening. My Airport Express which I use for AirTunes is an old g type and my iPhones are obviously g. As a result if my Mac and Mac Mini are on the TC N network then they iTunes can't connect with the Express and apps on my iPhone that connect across wi-fi to the Mini can't do so. Apart from getting a dual band TC is there any way I can get what I want (my Express and iPhones not pulling down the n network to G standards)? I guess I could bite the bullet and get an n AX, leaving just the iPhones dragging things down when they're in use. The reason for me wanting to do this was because AirTunes often cuts out (desired solution wouldn't solve this but TC backups are probably causing heavy network traffic when I'm streaming music), I get a poor wi-fi signal in the garden and iTunes Library sharing between iMac and Mini is unreliable.
View 10 Replies
View Related
Apr 30, 2010
My son and I both have Mac Book Pros and a wireless network running at home. We have Snow Leopard, and Comcast 12mb cable internet. I currently am using a 2 year-old Linksys WRT160N router going through my own Motorola Surf Board SB6120 modem. It's been fine the last couple of months after the switch from AT&T, but every now and then, it seems to lose the IP addresses and connection, so I end up having to call Comcast to reset them from their end. I'm beginning to thing that perhaps it's time to get a new router. What is even stranger is that sometimes I still have service and my son, 20 feet away in his room, loses it or vice-versa. What are your esteemed opinions on this? Do you think it's the router or some setting? If it is the router, what do you all recommend in the way of a dual-band, perhaps dual radio, wireless N-router?
View 24 Replies
View Related
Mar 11, 2009
Here's something I have tried in the last couple of days. I have Time Capsule and Airport Express. I decided to try the dual band. Time Capsule distributing 802.11n only (5GHz), and in a bridge mode, have Airport Express connected via ethernet, and distribute 802.11g only. Wireless N network has a name "xxxn." Wireless G network has a name "xxxg." Two separate networks are on different frequencies, and are in different radio modes. They are positioned about two feet away from each other. I have used various internet speed test websites, and from a distance close to the routers (same room) I get a speed check of about 25~30 mbps. That's the speed that I'm suppose to get. Move to a couple rooms away, I would say about three wooden walls, a wooden door, some "normal" interfering objects in between.
Speed test, and the results are very different. About 20 mbps for Wireless G only network, which is fine. But around 8.5 mbps for Wireless N only in 5GHz. Half the download speed. Upload is same at about 6mbps. In this case, wireless N was slower than wireless G. Harassed an Apple technical support and IP tech friend, and the answer was, "2.4GHz does better at passing through interferences such as large water tanks, electronic devices, glass and metal plates. 5GHz is not as resilient as 2.4GHz. For people experiencing issues with 5GHz, using 2.4GHz might be the better option." So there you go. Performance boost might not be that great. But then again, maybe new device has made a significant improvement.
View 1 Replies
View Related
Mar 16, 2009
I set up my time capsule using the wizard that apple provided. I have one SSID set up and wpa pw. I can use both Iphones (802.11g) and m macs (802.11n). Since they both work (With old TC, iphone would not see it because I set it to N only) am I running the most efficient way? Network utility shows macs connected at 270 Mbit/s and G devices at 54 Mbit/s. The gizmodo review says that they show show as 2 separate access points? [URL:..]
View 1 Replies
View Related
May 6, 2009
I have 2x AExpress G's running WDS in my house. 1 is upstairs (aptly named 'upstairs') and the other is downstairs (betcha can't guess that one's name). The one upstairs is connected to the cable modem, while the downstairs one has our Epson printer plugged into it via USB. This works very well providing lots of signal strength and accessible printing from the Mac, the wife's PC, and whatever other laptops I have running around at any given time. The problem :: One of my AExpress units keeps freezing and needs to be rebooted. Right now, it's the one upstairs at the cable modem. Various other info ::
#1 The new mac is a Unibody MBP with wireless N, and I would love to upgrade.
#2 I know with the AExtreme you can run the N network seperate from the G network so the MBP would be fast.
#3 The only N device is the MBP. (EDIT: False, my AppleTV is also N)
#1 Is it worth it to upgrade? I've already trained my wife to go reboot the upstairs one and she's fine with that. I'm not, however... it's annoying!
#2 If I upgrade to the AExtreme, can I still print using the good AExpress I'm currently printing with? (Does this WDS setup really change at all then, or would I have to use client mode on the downstairs AExpress?)
#3 Is it possible to do the same with a DLink dual-band router if I switch the AExpress to a wireless "client," or would that defeat the dual-bandedness (I just made that word up)
#4 My brain hurts.
View 4 Replies
View Related
Jul 30, 2009
I currently have the first generation 1TB Time Capsule which only supports compatibility mode for 802.11n. Using a slingcatcher, I get better speeds (way less video stuttering) running 5GHZ only mode vs compatibility mode. However, running 5ghz mode is annoying because my Eye-Fi card and iPhone aren't compatible with 802.11n. So I have two options. 1) Keep current Time Capsule. Buy a used Airport Extreme for $100 or UFO one for $30-$50. Connect AirPort Extreme to Time Capsule. 2) Selling my old Time Capsule. Buy new Time Capsule 1TB. Price for the older Time Capsule 1TB is only $20-$30 less than the new Time Capsule.
View 3 Replies
View Related
Aug 5, 2009
I set up my new airport extreme today, but I have a concern. Obviously it supports dual band, but how do you set that up? I don't think I'm transmitting in wireless n because my iPod touch works fine on the network. I only see one wireless network. Does this mean I'm not transmitting in wireless n, or am I?
View 6 Replies
View Related
Dec 21, 2009
I've been banging my head over this reading over and over multiple different threads but I can't come to any kind of a conclusion if I can do what I'm trying to do with the hardware I have. I realize when you have a g device connected to an N-network it drops the connection speed down. I was hoping I could get an express to extend the network then put the extreme in N-only and have my mbp connect to that, while the other devices (ps3 and iphone) could connect to the express in g mode. From what I've seen, everything is connecting to the express, including the mbp. Is there no way to force it to connect to the express in N mode? Is there no way I can simulate the functionality of "dual band" with just an extreme and an express?
View 5 Replies
View Related
