My G5 is completely full. Can I transfer my iphoto contents to an external HD? Using Time Machine won't help because it only backs up my photos so I can't add more to my iphoto library.
Or, is there a way to make iphoto an external HD application so the photos are only stored ion the external HD?
How can i modify(delete,paste) the contents on the external hard disk that has an NTFS partition?
Info:
MacBook
Pro, Mac OS X (10.7.3)
I am transferring my iPhoto library to an external hard drive and it is agonizingly slow.
I am attempting to make room on our iMac so am moving our 193 GB iPhoto library to our Seagate 2TB external hard drive. The drive is brand new AND is formated properly as Mac OS Extended (Journaled) but the current copy estimate is for it be completed in over 80 hours. I dont beleive the drive is broken as data is continuing to be transferred and not completely hung up.
When I transfer other folders/files the process is much much faster. Problem only seems to be with iPhoto library that I have found.
Info:
iMac, Mac OS X (10.6.8)
how can i transfer photos to an external hard disk?
Info:
MacBook Air, Mac OS X (10.6.8)
I have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
View 6 Replies View RelatedEach time I want to transfer any data from my laptop to an external hard drive disc, I can't do it, I just move the file to the destination but it don't accept it, it show me the sign "forbidden".
Info:
MacBook Pro, Mac OS X (10.7.2)
I know this is a reoccurring question, but I haven't found the answer to this specific flavour of it, so I hope you can help. I'm using iphoto 09. After initially using it with default setup, I've now unticked the 'Copy items to the iphoto library' in preferences.I've got an external (NAS, one that is plugged in the router) harddrive with all my photos on it. I didn't want to pull them into a library on my mac, and putting the iphoto library onto the NAS drive didn't work either (it wouldn't load the thumbnails). So I've decided to leave the photos where they are and point iphoto to them without importing them (by unticking that box I mentioned, which was described in another post). Deleting however is a problem. Ideally I would hope I can delete a photo in iphoto and it would be deleted on the NAS drive as well. I've read all the posts about deleting and then emptying the iphoto trash, which I did. I pressed all sorts of keys when deleting (cmd, alt, ctrl, shift etc. - didn't work either.
View 3 Replies View RelatedOur family has had a Mac for about a year and recently we started getting warnings about space and Startup Disk getting full. We have a 250GB drive and and have about 30GB free. Movies are taking up 121GB and Pictures 31GB. We want to move the iMovie files off the laptop after we create a DVD of our sons basketball season. Recently my wife deleted files by going to iPhoto and selected multiple files and then pressed OPTION + COMMAND + DELETE, to remove them. Afterwards iPhoto said it was updating library and was scanning like up to 84K of items. We only had a library of 6K items. Once complete it did finally show about 1k items left. I would really like to copy files to USB rather than delete them. Help, how do you move these files to USB?
Info:
MacBook
Pro, Mac OS X (10.6.8)
How do I transfer my iPhoto library from my 2006 iMac to an external drive? My iMac is having issues and I don't want to loose all my photos.
Info:
iMac Intel Core 2 Duo, Mac OS X (10.5.8)
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I have an iMac that is rapidly filling up. I would like to move my iTunes and iPhoto library to my external harddrive (I currently use for Time Machine). Is this possible or even adviseable? If I were to do this, what would I need to do. Is it as simple as moving the folders that hold these files on to the external. Would the programs find them.
View 5 Replies View RelatedI have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............
View 2 Replies View RelatedI've connected my new Iomega Minimax with a firewire cable directly to my iMAc but nothing appears on my desktop.
Info:
iMac
I tried to install Snow Leopard.
I got the error, "The contents of this disk can't be changed. Mac OS X couldn't be installed on this disk."
I restarted, to boot from the startup disk, not the CD.
And now it just goes to the grey screen and shuts off.
Pressing "C" or "Opt - Command - P - R" or holding down the Power button for a while and then restarting, or trying "Command - V"..... none of it works.
The machine just goes to the grey screen, the wheel spins, and it turns off.
How to transfer files to an external drive when start up disk is full?
Info:
MacBook Air, Mac OS X (10.6.8)
My friend wanted some files to be transferred to his external hard drive from my Mac. As he is a Windows user, I guess his hard drive is formatted for Windows as well. As I plug in the hard disk in my Mac, I can't transfer the files. It says something like "the disk cannot be modified". So, please help me on how can I transfer this files from my Mac and if I do format it to work with the Mac, will it work for Windows later?
View 2 Replies View RelatedI can't transfer from my external harddrive on to my mac for some reason it's unable to complete the transfer of 78.6GB of music there is over 400GB of free space on my mac as it's only one day old!
Info:
MacBook Pro
I am giving my iMac to someone else. I have a Macbook Air that I will continue to use. Is there an easy way to transfer everything from my iMac to my Macbook Air in one fell swoop?
View 1 Replies View RelatedI have a lot of old VHS but my VHS reader is broken. There is some HW and SW product somebody can suggest to use with my iMac in order ti perform the tranfer of the contents?
Info:
iMac, iOS 5.0.1
I have plugged in my External drive to my MacBook Pro, and it's all fine when I open the files in it. But as I try to transfer files to my hard drive, it won't transfer. Instead it keeps denied and the same goes when I try to transfer some files to another persons hard drive.
View 1 Replies View RelatedMy new iMac is arriving tomorrow and I need to transfer everything over to it. I know about Migration Assistant, but I want to know if there will be any complications due to the data I have on an external hard drive.
Specifically, I currently have an older (white) iMac hooked up to two 2TB external hard drives. One if for backup but the other one has all my iPhoto and iTunes content on it, including about 1.5 TB of movies and TV shows that I have ripped. None of this material is on the computer's internal hard drive - it is all on the external hard drive.
Because my new iMac has a 2 TB internal hard drive, I want to transfer all the iPhoto and iTunes content currently on the external hard drives onto the internal hard drive of the new iMac. Will Migration Assistant handle this and will it be clear what I need to do?
I just bought a Western Digital 1TB My Book Essential Edition external hard drive. I have a lot of videos, stored as disk images, from my HD camcorder on my MacBook that I want to copy onto the external hard drive for storage and also transfer to my other MacBook. The problem is that this hard drive is setup so that it will not transfer any file over 4 GB. A lot of these disk images are over 4GB and thus will not transfer. Is there any way to reformat this external HD to a system that will allow transfer over the 4GB threshold? If so, can someone please explain the process to me in as much detail as possible? If not, can someone recommend an external HD that does not have transfer limits?
View 11 Replies View RelatedI have a 1TB external hard drive I use for backing up my digital camera pics. I have been using it on my parents compaq presario. However I recently made the switch to a Mac and bought a early 2005 Power Mac g5 dual 2.0ghz with osx 10.5 on it. The question I want to know is, if I unplug the drive from the presario and plug it into the back of the g%, will the files show up or does the drive need to be reformatted?
If so i'll just back everything up and reformat it and switch the drive to my computer.
I have an IMAC and I am having problems transferring video files I download to my external hard drive. I had trouble playing the files at first because it was not readable with Quicktime. I downloaded VPN and it played with VPN. I don't want to save those files on my computer so I would like to transfer it to my external harddrive. When I try to drag it over, it won't let me drop it in. I am new to the MAC world. Is there a way to choose where it will save itself right before you download like there is on windows. I click on it and it does not prompt you, it just starts downloading.
View 8 Replies View Related1. how i can transfer OR save my data or music to my external Hard Drive. As it keeps coming as my External drive is 'READ ONLY', when I have chnaged my 'Shared' setting sto Sharing.
2 I want to save my data to our 'Tera Byte External Hard Drive'?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1
I am a PC user crossing over to the iMac. I want to move my pic on an external hard drive to the iMac. Tried clicking and dragging, but didn't take....what gives?
Info:
iMac, iOS 5.1
I have a 3TB USB 2.0 "media" external hard drive attached to my iMac. I use it to store all itunes media only, since I have over 300 movies. I also have tv shows, music etc. I just got a new 2TB thunderbolt LaCie Big Disk external drive. I want to transfer all stuff in "media" USB hard drive to new thunderbolt drive. Reason for doing this, sometimes current USB "media" drive lags on responding when I come back to use itunes from sleep or inactivity. I'm thinking about just dragging all content from old drive to new drive, eject old drive, name new thunderbolt drive "media", and relaunch itunes. Would that work successfully? I'd like my itunes to remember my play count. If my content play count is lost, does iMatch remembers play count and once I update my iMatch with new thunderbolt drive installed, will my play count be updated to my itunes?
Info:
iMac, Mac OS X (10.7.2), 27", 3.4 GHz, 12GB RAM.
