I have a 24-inch iMac that is ripe for replacement; my wife barely uses a 2010 15" MacBook Pro.
In 2011 I'm thinking of buying a MacBook Air for her and I take the MBP.
-I would buy a 27-inch display for the MBP;
-ideally she could use the 24-inch as external display for the MacBook Air
-or, alternatively, I would use the 24-inch as external display for the MBP
Would any of these solutions work?
Today I bought iMac 27-inch. Firstly I planned to buy 21.5 inch, but when I saw this 27-inch I decided to buy it. I've got Core 2 Duo version.
So, I wanna to connect my 360 to this iMac. I have Mini Display -> DVI adapter and than DVI -> HDMI adapter and the problem could be sound. DVI does not transmit any sound. So is there option to play sound from 360 on my iMac or via headphones? What if I connect stereo cables (into mini jack using adapter).
Is the new 27 inch cinema display any different the the displays on the 27 inch iMac??
View 4 Replies View RelatedDoes anyone know if the panel used in Apples 24 inch Cinema display is the same as the 24 inch iMac?
View 3 Replies View RelatedI am setting up a new 17 inch macbook pro for a friend. He uses a 24 inch LCD external monitor so we purchased the mini display port to dvi adapter (as opposed to the mini display port to dual link dvi adapter for 30 inch monitors). However, I am at home setting up his computer using my external monitor which is the 30 inch dell monitor. For some reason, the maximum resolution I can get is 1280x800 on the external 30 inch monitor. I figured I should at least be able to get 1920x1200 resolution, right?? Does anyone know what may be going on here. I know you're able to switch between video cards on the unibody macbook pros, how do I do that as well?
View 2 Replies View RelatedI've just bought a MBP 15" and am wondering if I can connect a 24 inch monitor too make it a extended display. Can someone make a recommendation on what monitor (24 inch) display to buy? And Which connector to get so I get full resolution on the external display?
View 7 Replies View Relatedwhy can't i turn down the monitor brightness in target display mode? volume keys and cmd-f2 works as described, but brightness keys do nothing?
Info:
iMac, Mac OS X (10.7.3)
I would like sometimes use my PC and I would like to use 2010 iMacs display as my PC's display.
Info:
iMac (27-inch Mid 2010)
Using an HDMI cable straight in to the tele + in to the back of the iMac through a HDMI to Mini dvi connector. The tele shows the background from the mac but nothing on the display, am I missing something? I searched around and found that a scan rate convertor may be needed...
View 1 Replies View RelatedI heard this is possible, however will it be possible with a windows laptop ( dell e6400) It's a work laptop and wasn't sure If I could do this with some sort of adapter.
View 8 Replies View Relatedearly 2009 Intel iMac 24". OS 10.6.8.
Working in Excel today, I was highlighting groups of cells with color when the entire screen suddenly had a pale grey-green tint. Can still see colors beneath, but everything tinted (not just the Excel window, but the entire display). White, of course, is most dramatic. The Dell monitor beside it is fine.
I've recalibrated color a half dozen times (have always had to do that to get the Dell and iMac screens as similar as possible). It's impossible to get white on the Mac. Rebooted several times, including hard boot, zapped the PRam, ran Permissions Repair and Disk Repair from the startup CD. Installed Temperature Monitor to see if there's a heat problem, but I could not find normal temp values anywhere on the Web, so that was something of a bust. Temps attached below in case there's an educated set of eyes out there....
Ran some online tests, too, for color distortion, dead pixels, that kind of thing, but nothing reveled.
I've been all over the Web looking for some guidelines, but most posts at apple and elsewhere seem to focus on later-model iMacs with the yellow lower screen problem when new (It's not that) or panic screens of wild colors, stripes, and the like. This is just a grey-green tint that covers the entire screen, rendering whites grey-green and colors muddy.
I'm trying to using my iMac wireless keyboad for my macbook pro while my iMac is in external display mode but I can't get the keyboad to connect. I've tried disconnecting the wireless keyboard from my iMac but it won't go into target display mode without the keyboad. Can I used my iMac wireless keyboard with my Macbook pro while my iMac is being used as an external display?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Main Computer
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
The new 27-inch iMac uses up to 365W vs 280W for the old 24-inch! (going by Apple's published max. power consumption numbers. I doubt they would lie because it isn't exactly favourable for them to put in falsely high numbers in an environmental report).
That means there's some extra beef behind the extra components. Perhaps the ATI 4670 is a bit overclocked and the 4850 runs a bit faster than the old iMacs? Admittedly that 2.8 GHz i7 is going to suck a fair bit of power - the recent 2.8 GHz i7 860 model runs at a 95W TDP, however, the quad core iMac isn't available until November. So it won't be using the i7 860, and my guess it is using another custom processor, something a bit more power efficient, somewhere in between the 55W TDP of the old iMacs and the 95W TDP of the i7 860.
The difference between the power consumption of the two computers is 85W. The old iMac had a 24-watt digital amplifier, this new one has two 17-watt amplifiers. That brings the delta down to 75W. Say the iMac's i7 processor has an 80W TDP. That now brings the delta down to 50W. The new display likely wouldn't increase power consumption because of the LED backlight.
I'm not sure if I'm missing much (OK, two extra RAM chips may use another few watts), but there is still a fairly massive 50W unaccounted for.
Just a bit of fat to chew on
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
Is this even possible?
View 12 Replies View RelatedHello everyone, I'm currently looking to buy a 27 inch imac and can't decide whether to get a base i3 27 inch or a refurbished i5 quad core 27 inch. With the i3 I can get the student discount and qualify for the ipod, but the i5 is 23% off right now. Which should I get? Also is there a benefit of getting a 5 series graphics card over a 4 series graphics card?
View 4 Replies View RelatedI'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
I have a Macbook Pro mid 2009 running Mavericks. I have an old 23" Cinema Display that uses a big chunky adaptor (ADC?) with a dual USB and Thunderbolt cable and it works well with it, however, I just bought a new Thunderbolt 27" display and it just won't detect it. I also notice that a lacie drive in the same Thunderbolt slot won't show up either. The old Cinema Display does still work however using that same slot so it's not actually dead. Puzzled!
I know this MBP is probably one of the first generation to have Thunderbolt but I've never used it for anything other than the old Cinema Display adaptor.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I just got a new MacBook Pro for graduation. I've decided to use my iMac as an external display and use my Macbook Pro as my main computer. My iMac has about 1TB of space while my MacBook has about 500 GB. Since I'll be using my iMac primarily as a external display I was thinking about also using it as an external harddrive so I can backup my data from my Macbook via Time Machine.Is this ok to do? Does anyone advised that I don't? I just want to make sure I don't screw up anything before doing so. BTW I also have a WD external harddrive connected to my iMac.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Main Computer
I just got the latest 13" Macbook Air and hooked it up to my Apple 24 inch LED Cinema Display. It works great but I've noticed that the resolution is not the same as when I had my 2008 Unibody Macbook attached to it. Everything is bigger (i.e. lower resolution) when the MBA is connected. I went into Display Preferences and changed it to the highest resolution but it didn't change. It's not that big a deal, but I thought I'd ask and see if anyone had any suggestions on how to get better resolution on the cinema display. Or is it not possible with the new MBA connected?
View 1 Replies View RelatedI'm thinking about getting a MacBook in the future and I want to extend my desktop to my 19 inch 4:3 Dell display at 1280 x 1024. Would this work with the macbook display at 1280 x 800?
View 1 Replies View Relatedim looking to get one of those new(er) 24inch apple displays and it says it connects with a mini displayport connector which is in the newest revision of the macbooks. problem is, I have one of the "older" white macbooks, which doesn't have this connection. what can i do ? is there a converter available?
View 4 Replies View RelatedSay I set up my xbox with a component to minidisplay port adapter and plugged the mini display port into my macbook pro 13 inch, could i use the moniter as a dsplay for my xbox. I currently don't have an hd tv in my dorm and i like the display on my macbook and would like to use it. Also, would it be possible to buy something like an hdmi to firewire 800 and then use the firewire port on my macbook for the video in. Even though the mini displayport is an output, will it make a difference. I am also interested in buying a capture device and using that with the usb port on my mac, but i have heard that the latancy is really bad and you don't get to play at the full resolution.
View 2 Replies View RelatedI got a MacBook Pro back in April, my first Mac.
I love it so much. I'm really into video editing and HD video, but the problem is that my MBP is running out of harddrive space, and I'm longing for a bigger display and a better processor. (I have the 13" C2D). I'm going to pick up an iMac this Spring. But I wanted to know if I should stick to the Core i3 21.5, or spend more and go for the 27 inch.
how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks
View 6 Replies View RelatedI have the mini display port plugged in and a vga cable from the imac to my external monitor. I should just be able to turn the monitor on and it work but the imac doesn't detect it and it just comes up as a black screen.
View 2 Replies View RelatedIn the near future I will be purchasing a 24" iMac and I wanted to now if I could display TV programs or video game consoles on it using S-video (or another type of cable)like a normal Television screen.
I want to know because I also plan on purchasing a PS3 and want to display it on the iMac's beautiful 1080p screen!
Please tell me if there is any way so I can purchase the needed accessories in advance.
Hi this is my first time doing this, but I want to connect my iMac to my LCD TV via HDMI, but my computer only has a mini dvi port on the back. What cables do I need and is my iMac capable of outputting to 1080p?
I have the baseline late 2006 iMac (5,1) with ati x1600 card and my current display resolution is 1440x900.
Will I have to have both monitors on or can I just have the LCD TV be on and the iMac built in monitor be off?
